GE Security VAADR14130WDM-R3 Specsheet

PRODUCT SPECIFICATION

.comwww.

Available at:

Available at:

VAADT/VAADR14130WDM

DIGITALLY ENCODED VIDEO WITH 2 AUDIO AND 1 DATA CHANNEL

FEATURES

10-Bit Digitally Encoded Video Transmission

•

Exceeds RS-250C Short-Haul Transmission

•

NTSC, PAL, SECAM Compatible

•

• Full Color Compatibility

V

DESCRIPTION

The IFS VAADT/VAADR14130WDM series video transceivers
support simultaneous broadcast quality transmission of 10-bit
digitally encoded video, 20-bit digitally encoded stereo audio and
bi-directional data transmission over one singlemode optical fiber. The
modules are universally compatible with major CCTV camera manu­factures and support RS-232, RS-422, and 2-wire or 4-wire RS-485
data interfaces and all major data protocols. Plug-and-play design
ensures ease of installation requiring no electrical or optical adjust­ments. Each transceiver incorporates status indicating LED’s for mon­itoring of proper system operation. The modules are available in either
stand-alone or rack mount versions.

APPLICATION EXAMPLES

• Distance Learning CCTV with PTZ and Access Control
with 2-way Audio Communications

• ITS (Intelligent Transportation Systems)

• 20-Bit Digitally Encoded Stereo Audio

• 600 Ohm Impedance Line-Level Audio

• No In-field Electrical or Optical
Adjustments Required

• LED Status Indicators For Monitoring All Critical

Operating Parameters

• NTCIP Compatible

• Tested and Certified by an Independent Testing Laboratory for

Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses

on all Power Lines

• Distances up to 43 Miles (69 km)

• Comprehensive Lifetime Warranty

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

A

D

ORDERING INFORMATION

SINGLEMODE

9/125µm

ACCESSORIES

OPTIONS

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth.

♦♦

All accessories are third party manufactured.

PART
NUMBER

VAADT14130WDM

VAADR14130WDM

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)

♦

♦

PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
PS-24VACCT 24 volt AC Center Tap Power Supply

Add ‘-R3’
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC’ for SC Connector
Add -‘FC’
Add ‘-HP’ to Model Number for 26 dB Singlemode Optical Power Budget

national Fiber Systems, Incorporated

Inter

to Model Number for R3 Rack Mount - No Char

to Model Number for FC Optical Connector

FAX [phone]

Video Transmitter & Audio Transceiver/Data Transceiver (1310/1550 nm)

Video Receiver & Audio Receiver/Data Transceiver (1550/1310 nm)

■ [e-mail] ■ For an office near you go to: www.ifs.com

With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America

DESCRIPTION

ge (Requires R3 Rack purchased separately)

■ DESIGN CENTER (888) 999-9IFS or [phone]

FIBERS

REQUIRED

1

OPTICAL

PWR BUDGET

23 dB

MAX.

DISTANCE*

43 miles (69 km)

81

Audio

Pre-Amp

Audio

Pre-Amp

Amp/Speaker

Amp/Speaker

Control

Data

Control

Data

Video

(Coax)

Video

(Coax)

up to 43 miles

(69 km)

1 Fiber

9/125µm MM

VAADT14130WDM

VAADR14130WDM

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

TECHNICAL SPECIFICATION

Federal Supply Schedule

Contract No. GS-07F-0049M

DIGITALLY ENCODED VIDEO WITH 2 AUDIO AND 1 DATA CHANNEL

SPECIFICATIONS

VIDEO

Video Input: 1 volt pk-pk (75 ohms)
Video Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >67 dB

DATA

Data Interface: RS-232, RS-422 ,or 4 wire RS-485

Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 kbps (NRZ)
DTE/DCE Interface: User-Selectable
Operating Mode: Simplex or Full-Duplex

AUDIO

No. of Bits: 20
Sampling Rate: 52.3 KHz
Bandwidth:
Maximum Input/Output Level: 0 dBm across 600 ohms
Signal-to-Noise Ratio (SNR): 87 dB, Min.
Total Harmonic Distortion: 0.01% @ 0 dB Output Level
Channel Crosstalk: -100 dB at 1 KHz
Input/Output: Balanced or Unbalanced, 600 ohm

WAVELENGTH 1310/1550 nm, Singlemode

NUMBER OF FIBERS 1

LED INDICATORS

VAADT Transmitter Unit:

• 8-Segment Display for Audio Input Level, Audio Channel 1

• 8-Segment Display for Audio Input Level, Audio Channel 2

• Video Input Sync Presence (Bi-Color LED)

• Data Transmit

• Data Receive

• Analog-to-Digital Converter Overload (Bi-Color LED)

• Optical Carrier Detect/Line-Lock (Bi-Color LED)

• Operating Power

with Tri-State

20 Hz to 18 KHz @ -1 dB

VAADT/VAADR14130WDM

AADR Receiver/ Data Transceiver Unit:

V

8-Segment Display for Audio Input Level, Audio Channel 1

•

• 8-Segment Display for Audio Input Level, Audio Channel
Video Output Sync Presence (Bi-Color LED)

•
Data Transmit

•
Data Receive

•

• Analog-to-Digital Converter Overload (Bi-Color LED)

• Optical Carrier Detect/Line-Lock (Bi-Color LED)
Operating Power

•

CONNECTORS

Power , Audio and Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Optical: ST, SC or FC (see ordering information)
Video and Reverse
Sync (Genlock): BNC (Gold-Plated Center Pin)

ELECTRICAL & MECHANICAL

Power:
Surface Mount: 12 VDC @ 500 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current

Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

AGENCY COMPLIANCE

Limiters

MADE IN THE USA

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J

OPTICAL POWER BUDGET

FIBER

Singlemode

9/125µm

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

WAVELENGTH

1310/1550 nm

TRANSMITTER

MODEL

VAADT14130WDM

OUTPUT MODEL

400 µw

(-4 dBm)

VAADR14130WDM

RECEIVER

SENSITIVITY

(-27 dBm)

OPTICAL

PWR BUDGET

2 µw

(26 dB -HP Option) 48 miles (78 km)

SYSTEM DESIGN

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commer

Due to our continued effort to advance technology, product specifications are subject to change without notice.

ce Road

■ Newtown, CT 06470

82

23 dB

MAX.

DISTANCE*

43 miles (69 km)