GE Security S7715D-RFC2, S715D-RST2L, S715DT-RST1 Specsheet
GE
Fiber Optic
Security
Overview
The S715D and S7715D fiber links provide two-way transmission
of two multiprotocol data channels over one or two single mode or
multimode fibers. The S715D model features multimode operation,
while the S7715D model operates over single mode fiber.
Data Translation
The data functions include the unique data translation feature,
which allows one data format to be input and a different data
format to be output. Data formats are selected during installation
and can be easily changed in the field via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an
extensive set of built-in diagnostic tools including
LEDs that monitor the data and optical signals.
Data Transmitters and Receivers
Standard Features
• Two-way data transmission over one or two single mode or
multimode fibers
• Supports multi protocol data formats including RS-232, TTL,
RS-422, RS-485, Manchester, Biphase and SensorNet
• Unique data translation function
• 18 dB (single mode) or 13 dB (multimode) optical budget
• SMARTS™ diagnostics
Two-Way
2-Channel
Multiprotocol
Data
S715D and S7715D
GE
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Data S715D (Multimode) S7715D (Single Mode)
Channels 2 duplex, format independent
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire),
Baud Rate 250 kbps to 512 kbps (depending on data format)
Bit Error Rate
Relay/Contact Closure
Relay/Contact Rating
Optical
Mode Multimode Single Mode
Optical Budget 13 dB 18 dB
Emitter Laser
Wavelength 850 nm and/or 1300 nm
Operating Distance Up to 11 mi (18 km)
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated
Current Requirement 400 mA
Power Consumption 4 W
Power Factor 4
Protection Solid-state short circuit protection
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions, Rack Units 1 slot (1.0”)
Weight 0.7 lbs (0.32 kg)
Construction Aluminum
∗
(depending on model)
∗∗
(depending on model)
Manchester, Biphase, SensorNet
<1.0E-9
2 duplex channels
1 A at 30 VDC
1310 nm and/or 1550 nm
(depending on model)
Up to 37 mi (60 km)
(depending on model)
Related Diagram
2 Data In/Out
Transmitter
2 Contact In/Out
Optical Fiber
Receiver
2 Data In/Out
2 Contact In/Out
Ordering Information
Use the Configurator below to select the options available for this product.
S715D
Product Type
TRTransmitter
Receiver
Omit for Transceiver
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S715D-2006-09-2
- RST
No. of Fibers
1
Fiber (transmitter
and receiver only)
2
Fibers
(Transceiver only)
Optical Wavelength
L
Add here only if ordering
High Order Wavelength
(2 Fiber Transceivers only)
S7715D
Receiver
Product TypeConnector Type
TFC
Transmitter FC Type
RST
Receiver ST Type
Omit for Transceiver
- R
No. of Fibers
1
Fiber (transmitter
and receiver only)
2
Fibers
(Transceiver only)
Optical Wavelength
L
Add here only if ordering
High Order Wavelength
(2 Fiber Transceivers only)
imagination at work
imagination at work
Loading...