GE Security S713D-EST2, S713D-RST2 Specsheet
GE
Fiber Optic
Security
Overview
The S713D fiber link provides two-way transmission of 10Base-T
Ethernet data over distances up to 1.2 mi (2.0 km). It combines
the benefits of advanced engineering with the highest quality
standards in the industry. These links are available as standalone
modules or rack cards.
Secure Data Transmission
The S713D makes it possible to add the security and efficiency of
transmission over fiber to local area networks (LANs) and other
Ethernet applications.
Superior Diagnostics
The SMARTS™ diagnostic technology provides constant monitoring
of the link and the equipment connected to it. Displays show the
status of the optical signal, input and output data, link status, and
polarity state.
Data Transmitters and Receivers
Standard Features
Two-way data transmission over two multimode fibers
•
10Base-T Ethernet protocol
•
Switch-selectable crossover
•
Automatic polarity correction
•
13 dB optical budget
•
Optical AGC
•
SMARTS™ diagnostics
•
Standalone and rack configurations
•
10Base-T
Ethernet Data
S713D
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Data
Channels 1 duplex
Formats 10BaseT Ethernet
Baud Rate Compliant with IEEE 802.3
Bit Error Rate <1.0E-10
Optical
Mode Multimode
Optical Budget 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance 1.2 mi (2.0 km)
Transmitter Launch Power -18 dBm
Receiver Sensitivity -31 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated (standalone); 13.5 VDC regulated (rack)
Current Requirement 200 mA
Power Consumption 2.8 W
Power Factor 2
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone
Units
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 0.67 lbs (0.31 kg); Rack 0.55 lbs (0.25 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
∗
∗∗
5.0” x 2.8” x 1.5” (127 x 71 x 38 mm)
Related Diagram
Ordering Information
Use the Configurator below to select the options available for this product.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S713D-2006-09-2
imagination at work
Loading...