GE Security GE-DSG-8 Specsheet
Network Transmission
Gigabit Ethernet Unmanaged Switch
Overview
GE’s Industrial Gigabit Ethernet Unmanaged Switch Series
is now IFS. Designed to deliver non-blocking, triple-speed
performance (10/100/1000Mbps), these unmanaged
switches comprise a family of Industrial Ethernet Switches
that can be deployed in harsh, heavy-industrial and
curbside trafc control cabinet environments.
A 10Gbps or 16Gbps internal switch fabric, combined with
9K jumbo packet support, delivers high performance for
large trafc volume and is ideal for linking to a backbone
or high-capacity servers.
The IFS Industrial Gigabit Ethernet Unmanaged Switch
Series utilizes a store-and-forwarding architecture to ensure
low latency and high data integrity. This feature eliminates
unnecessary data trafc and relieves congestion on critical
network paths.
With an intelligent address recognition algorithm, the
switches provide support for an 8K MAC address table
to enable ltering and forwarding at full wire-speed.
Flow-control capabilities add exibility in network
conguration, allowing integration of these switches
with various switch-supported routers and servers.
GE-DSG/DSGH
Standard Features
Physical Ports
• 10/100/1000Base-T
• 5 or 8 RJ-45 connectors
• Auto MDI/MDI-X
• Auto-negotiation complies with IEEE 802.3
10Base-T, IEEE 802.3u 100/Base-TX, IEEE 802.3ab
1000Base-T Ethernet standards
Switch Architecture
• Store-and-forward switching architecture, broadcast
storm control and runt/CRC ltering optimize network
bandwidth by eliminating erroneous packets
• High performance switch fabric (10 or 16Gbps)
• Back pressure (half-duplex) and IEEE 802.3x PAUSE
frame-ow control (full-duplex) to prevent packet loss
• Automatic address learning and address aging
• Integrated address-lookup engine with support for 8K
absolute MAC address table
• Up to 176 kilobytes on-chip frame buffer
• 9K jumbo packet-size support
• CSMA/CD Protocol
Robust Hardened Design
• Slim IP-30 metal case for protection
• Provides either DIN-rail or wall-mounting
• 12 to 48 VDC, redundant power with reverse-polarity
protection
• Removable terminal block for master and slave power
• Alarm relay output for power-failure alert
• Voltage/surge-suppression
– EFT 6000VDC protection for power lines
– ESD 6000VDC protection for Ethernet
• Complies with IEC60068-2-xx standards for free-fall,
shock and vibration
• Wide operating temperature range of -40º C ~ +75º C
Warranty
• 3-year limited warranty
Series
5-port and 8-port
Industrial Gigabit Ethernet
Unmanaged Switches
GE-DSG-8
8-Port Industrial Gigabit
Ethernet Unmanaged
Switch (-10~60ºC)
GE-DSGH-5
5-Port Industrial Gigabit
Ethernet Unmanaged
Switch (-40~75ºC)
GE-DSGH-8
8-Port Industrial Gigabit
Ethernet Unmanaged
Switch (-40~75ºC)
5.31 in.
North America
T 888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Industrial Gigabit Ethernet Switch Specications
Part No. GE-DSGH-5 GE-DSGH-8 GE-DSG-8
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
EMEA
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 561-998-6100
F 561-994-6572
interlogix.com
utcreandsecurity.com
Specications subject to
change without notice.
© 2011 Interlogix, A UTC Fire & Security Company.
All rights reserved.
GE and the GE monogram are trademarks of the
General Electric Company and are under license
to UTC Fire & Security, 9 Farm Springs Road,
Farmington, CT 06034-4065
Dimensional Diagrams
GE-DSGH-5
5.31 in.
(135 mm)
3.45 in.
1.25 in.
(32 mm)
GE-DSGH-8/GE-DSG-8
(135 mm)
1.25 in.
(32 mm)
(87.8 mm)
3.45 in.
(87.8 mm)
10/100/1000Base-T Ports RJ-45 (5) RJ-45 (8) RJ-45 (8)
Port Configuration Auto MDI/MDI-X
Port Speed
Electro Static Discharge (ESD)
Physical Ports
Protection
Switch Processing Store-and-forward
Mac Address Table 8K entries
Buffer 136 kilobytes 176 kilobytes 176 kilobytes
Flow Control Back pressure for half-duplex, IEEE 802.3x Pause frame for full-duplex
Switch Fabric 10Gbps 16Gbps 16Gbps
Throughput
(Packet per second)
Switch Performance
Jumbo Frame 9Kbytes
IEEE Standards
IEC Standards
EIA/TIA-568 Standards
Standard Compliance
Regulation FCC Part 15 Class A, CE
Safety UL, cUL
Power Power input 1; Power input 2; Power Fault
LED
Ports 10/100Mbps or 1000Mbps Transmission Activity
Indicators
Power Input
Power Consumption 11.9 Watts/40BTU 13.2 Watts/45BTU 13.2 Watts/45BTU
Electrical Fast Transient (EFT)
Protection
Power and Alarm
Fault Connector
Alarm Fault Relay 30VDC – 3A max.
Enclosure Metal (Meets IP-30 standard)
Mounting DIN-rail kit and wall-mount ears (included)
Electrical & Mechanical
Dimensions (W) x (D) x (H)
Weight (lbs/kg) 1.0 lbs 1.045 lbs 1.045 lbs
Operating Temperature -40ºC~75ºC -40ºC~75ºC -10ºC~60ºC
Storage Temperature -40ºC~75ºC -40ºC~75ºC -40ºC~75ºC
Relative Humidity 5% ~ 95% (non-condensing)
Environmental
Auto-negotiate 10/100Mbps (half/full-duplex) and
1000Mbps full-duplex mode
6KV
7.4Mpps@64Bytes 11.9Mpps@64Bytes 11.9Mpps@64Bytes
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex ow
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)
EIA/TIA-568 100-ohm STP (100meters, max.)
12~48 VDC, Redundant power with polarity-reverse protection
function
6KV
6-pin removable screw terminal
5.31" x 3.42" x 1.26"
135 x 87 x 32mm
Ordering Information
GE-DSGH-5 5-Port Industrial Gigabit Ethernet Unmanaged Switch (-40~75ºC)
GE-DSGH-8 8-Port Industrial Gigabit Ethernet Unmanaged Switch (-40~75ºC)
GE-DSG-8 8-Port Industrial Gigabit Ethernet Unmanaged Switch (-10~60ºC)
Note: External power supply must be purchased separately
003-3302 2011/02 (60342)
Loading...