GE Security FVSMDDD1111-TX Specsheet
Overview
Product Data Sheet
FVSMDDD1111-TX/RX
Fiber Optic Video/Data Transmitters and Receivers
The video, data, audio and contact closure series
fiber transmission products support optical
transmission of 8-Bit PCM coded video,
bi-directional data, bi-directional audio and
bi-directional contact closure through one fiber
either in multi-mode or single-mode fiber.
A cost-effective single unit design, this product is
well-suited for in field configuration and also
accommodates installation and system growth
while delivering long operating distances of up to
60 Km.
The enclosed unit is rack-mount compatible.
Plug-and-Play design ensures ease of installation
requiring no electrical or optical adjustments.
Standard Features
8 bit digitally encoded Video
E
Multiprotocol Data support: RS232, RS422 & RS485 2
E
or 4 wire tristate format
Field-selectable data format
E
Duplex Audio Channel
E
Duplex Contact Closure
E
Units are both rack mountable as wall-mountable
E
Standalone package includes a multimode transmitter,
E
a multimode receiver, and two power supplies
Duplicated LED indicators on the front and rear of the
E
unit for the convenience of observation
Adjustment and Maintenance free
E
Excellent suppression of EMI & RFI and elimination of
E
ground loop
Robust design for harsh environment applications
E
FVSMDDD1111-TX/RX
Fiber Optic Video/Data Transmitters and Receivers
Specifications
Video
Channels 1 simplex E
Format NTSC / PALE
Input/Output Signal 1Vp-p ± 5.5 IRE (NTSC) - 700mVp-p ± 40 IRE(PAL)E
Bandwidth >4.6MHzE
Signal-to-Noise Ratio >60 dBE
Video Resolution 520 TVLE
Input/Output Impedance 75 ohmsE
Differential Phase 1° typicalE
Differential Gain <2%E
Sync Amplitude 40± 2 IRE (NTSC) - 300± 20 IRE (PAL)E
Burst Amplitude 40± 2 IRE (NTSC) - 300± 20 IRE (PAL)E
K-Factor 1%E
Data
Number of Channels 1E
Data Direction DuplexE
Data Interface RS232, RS422, RS485 2 or 4-wire Tri-stateE
Selection Method DIP switch-selectableE
Data Rate 0-115.200bpsE
Data Protocol Protocol TransparencyE
Line Carrier Detection RS485(2/4-wire) Tri-state outputE
Data Tx & Rx Status Green/Red LED litE
Input/Output Connectors 7-pin screw terminalsE
Contact closures
Number of Channels 1E
Direction DuplexE
Input Type TTL Logic (positive)/ Dry ContactE
Output Type Default: Logic LOW/ Normal OpenE
Dry Contact Output Rating 110 VDC/125VAC, 30W/62.5VA max.E
Contact Output Response Type 2 msec.E
Input/Output Indications LEDs (Green lit/OFF)E
Input/Output Connectors 5-pin screw terminalsE
Audio
Number of Channels 1E
Direction DuplexE
Input/Output Type Balanced or Unbalanced Line-Level AudioE
Input/Output Impedance 10 KOhm/600 OhmE
Output Level (input 1KHz@0dBm) 0 dBmE
Bandwidth 20Hz - 20KHzE
Signal-to-Noise Ratio (SNR) >66dBE
THD (Ref. 1KHz, 0dBm) <1%E
Input/Output Indications LEDs (Green lit/OFF)E
Input/Output Connectors 5-pin screw terminalsE
Optical
Wavelength 1310 and 1550E
Number of Fibers 1E
Optical Budget
Multi-mode (62.5µm/125µm) 12dBE
Single-mode (9µm/125µm) 18dB@1310nm / 14dB@1550nmE
Single-mode (9µm/125µm) - Long Haul 19dB@1550nm / 25dB@1550nmE
Transmission Distance
Multi-Mode (Limited by Fiber Bandwidth) 4KmE
Single-Mode 40KmE
Singel-Mode (Long Haul Version) 60Km E
Fiber Connector (standard Supply) STE
Power Requirement
Supply Voltage 12VDCE
Card Protection Poly Fuse (1A)E
Current Consumption Max. 500mAE
Diagram Ordering Information
FVSMDDD1111-TX - Single Mode Transmitter
FVSMDDD1111-RX - Single Mode Receiver
FVSMLDDD1111-TX - Long Haul Transmitter
FVSMLDDD1111-RX - Long Haul Receiver
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-FVSMDDD1111-TX/RX-2011-07-4 08:34:44 Released : 04-JUL-11;
Loading...