GE Security FP1910WDM Specsheet
GE
FP1910WDM Fiberpak™ Video Link
Security
Overview
The IFS Fiberpak™ FP1910WDM fiber optic transmission kit
includes everything you need to transmit a CCTV signal
and bi-directional data simultaneously over one multimode
optical fiber. The kit includes a transmitter and receiver
that are designed to be universally compatible with major
CCTV camera manufacturers and support RS-232, RS-422,
and 2-wire or 4-wire RS-485 data interfaces and all major
data protocols. In addition, the kit includes wall mounted AC
transformers for both transmitter and receiver as well as
a complete installation and operations manual. FiberPak™
Videolinks’ Plug-and-play design and included accessories
make selecting the right fiber optic modules for your
installation easy.
Application Examples
Compatible With:
• Javelin® Video and Bi-Directional RS-232 Data
• Panasonic® Video and Bi-Directional RS-422 Data
• Sensormatic® AD Video and Bi-Directional RS-422 Data
• Vicon® Video and Bi-Directional RS-422 Data
IFS Video with Bi-Directional
Data Transmission Kit
Standard Features
• FM Video Transmission
• Power Supplies and Installation Manuals Included
• Supports RS-232, RS-422, RS-485 (2-wire or 4-wire)
Data Interfaces
• Transparent to Data Encoding/Compatible with Major
CCTV Camera Manufacturers
• Power and Carrier Detect Status Indicating LED’s to Monitor
System Performance
• Integrated WDM for greater Product Reliability
• No In-field Electrical or Optical Adjustments Required
• Distances up to 2.5 Miles (4 km) Without Repeaters
• NTCIP Compatible
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions
and Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
Video with
Bi-Directional
Data Transmission
Transmits a CCTV signal and
bi-directional data simultaneously
over one multimode optical fiber.
• Hot-Swappable Rack Modules
• Full Color Compatibility
• NTSC, PAL, SECAM Compatible
• Automatic Resettable Fuses
• Comprehensive Lifetime Warranty
Video
(Coax)
Control
Data
Video
(Coax)
1 Fiber
62.5/125µm MM
VT1910WDM
VR1910WDM
Control
Data
up to 2.5 miles
(4 km)
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 8 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB Attn.
Data
Data Interface: RS232, RS-422, Transformer, RS-485 (2 and 4 wire)
Data Format: NRZ, NRZI, Manchester, Bi-phase
Wavelength 850/1310 nm, Multimode
Number of fibers 1
Connectors
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: 12 VDC @ 200 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
System Design
Ordering Information
Part Number Optical Pwr. Budget Max. Distance*
Multimode
62.5/125µm**
Accessories
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
◆
FP1910WDM 1
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Description
FiberPak™ Video Transmitter (850/1310 nm)
FiberPak™ Video Receiver (1310/850 nm)
◆
All accessories are third party manufactured.
Fibers Required
14 dB
2.5 miles (4 km)
Loading...