GE Security FP1505WDM Specsheet
GE
FP1505WDM Fiberpak™ Video Link
Security
Overview
The IFS Fiberpak™ FP1505WDM fiber optic transmission
kit is designed for full compatibility with “Up-the-Coax”
video/data systems from major manufacturers such
as Panasonic Proteus™, Pelco Coaxitron™, Robot, Vicon
Vicoax™, Videolarm CoaxLynx™, Elbex, and others. The kit
includes a transmitter and receiver designed to support
the simultaneous transmission of video and “Up-the-Coax”
one-way data over one multimode optical fiber. In addition,
the kit includes wall mounted AC transformers for both
transmitter and receiver as well as a complete installation
and operations manual. FiberPak™ Videolinks’ Plug-andplay design and included accessories make selecting the
right fiber optic modules for your installation easy.
Application Examples
Compatible With:
• Panasonic®
• Pelco® Coaxitron
• Robot
• Vicon® Vicoax
• Videolarm® CoaxLynx
®
™
™
™
IFS Video with One-Way
“Up-the-Coax” Data Transmission Kit
Standard Features
• Transmission of Video and “Up-the-Coax” One-Way Data
• Automatic Resettable Fuses on all Power Lines
• Distances up to 1 mile (1.6 km) – Limited by the
Manufacturer’s “Up-the-Coax” Specifications on
Copper Wire
• Full Range Automatic Gain Control (AGC)
• Transparent to Data Encoding / Compatible with
Major Data Protocols
• No In-field Electrical or Optical Adjustments Required
• Power and AGC Status Indicating LED’s to
Monitor System Performance
• Integrated WDM for Greater Product Reliability
• Power Supplies and Installation Manuals Included
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Comprehensive Lifetime Warranty
Video with One-Way
“Up-the-Coax”
Data Transmission
Designed to support the
simultaneous transmission of video
and “Up-the-Coax” one-way data
over one multimode optical fiber.
Specifications
CX9024RX
(PELCO)
Monitor
Video &
Control
Video &
Control
PTZ
PELCO Coaxitron™ (1 Fiber)
VT1505WDM VR1505WDM
1 Fiber
62.5/125µm MM
up to 1 mile
(1.6 km)
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB Attn.
Data
Data Interface: Pelco Coaxitron™, Vicon Vicoax™, Panasonic Proteus™•,
Robot and Videolarm
Data Rate: DC-100 Kbps (NRZ)
Wavelength 850/1310 nm, Multimode
Number Of Fibers 1
Connectors
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: 12 VDC @ 200 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Note: Coaxitron is a registered trademark of PELCO. Vicoax is a
registered trademark of Vicon Industries, Inc. Proteus is a registered
trademark of Panasonic, Inc.
• Maximum distance for the Panasonic Proteus™ is 1.5 km.
System Design
Ordering Information
Part Number Optical Pwr. Budget
Multimode
62.5/125µm**
Accessories♦
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
FP1505WDM 1
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Description
FiberPak™ Video Transmitter (850/1310 nm)
FiberPak™ Video Receiver (1310/850 nm)
Fibers Required
14 dB
Max. Distance*
1 mile (1.6 km)
Loading...