GE Security DR3010-B-R3, DR3010-B, DR3010-C, DR3010-R3, DR3010 Specsheet

GE

DT/DR3000 Series

Security

Overview

The IFS DT/DR3000 series contact mapping transmitter and
receiver provides transmission of up to eight independent
contact closures over one optical fiber. Utilizing micropro­cessor-based logic for exceptionally robust
communications channel redundancy, and a trickle­charged nickel-cadmium (NiCd) battery back-up memory
within the receiver module, the DT/DR3000 series eliminates
the possibility of any of the relay contacts returning to a
random resting state in the event of an optical fiber
breakage or loss of prime operating power at the receiver
end of the link. Models within this series are available for
use with multimode or single mode optical fiber. Plug-and­play design ensures ease of installation requiring no
electrical or optical adjustments. Each module incorporates
power and individual status indicating LED’s for monitoring
confirmation of contact closure of each of the eight
channels. The modules are available in either stand-alone
or rack mount versions.

Application Examples

• Alarm Event Triggering

• Building Automation & Environmental Control Systems

• Lane/Gate Control

IFS Self-Healing Ring/

Full Duplex Data Transceivers

Standard Features

• Transmits Up to Eight Contact Closures Over One Fiber

• Eight Channel Point-to-Point Transmission Architecture

• Power and Eight Individual Channel Status LED Indicators

• Eight SPST Reed Relays (with individual indicators)

• Exceeds the Environmental Requirements of NEMA
TS-1/TS-2 & Caltrans Specifications (Temperature/
Humidity, Shock/Vibration, and Voltage Transient
Protection) for Traffic Control Equipment

• Microprocessor-based logic and battery back-up in
receiver unit eliminate random contact closure status
in the event of loss of optical fiber path or loss of prime
operating power

• Loss of Carrier Relay for Alarm Notifications

• Relay Contact Rating: 200 VDC, 0.5 Amps, Normally Open

• No In-field Electrical or Optical Adjustments Required

• Automatic Resettable Solid-State Current Limiters

• Hot-Swappable Rack Modules

• Distances up to 25 Miles (40 km)

• Comprehensive Lifetime Warranty

• Fire & Alarm Systems

• PIR Signal Transmission

Self-Healing Ring/
Full Duplex
Data Transceivers

Designed for implementing traffic
signalization/communications
data networks.

DT3010 DR3010

8

Contacts in

8

Contacts out

1 Fiber

62.5/125µm MM

up to 2.5 miles

(4 km)

ifs

International

Fiber

Systems

Incorporated

203.426.1180

ifs

International

Fiber

Systems

Incorporated

203.426.1180

Specifications

Data

Input/Output Channels: 8
Contacts: 200 VDC, 0.5 amp, 12 watts, normally open
Response Time: 25 msec maximum

Wavelength DT3010, DR3010: 850 nm, MM DT3020: 1310 nm, MM

DT3025, DR3030: 1310 nm, SM DR3030: 1310 nm, MM or SM

Number Of Fibers 1

Connectors

Data and Power: Terminal Block with Screw Clamps
Optical: ST or FC (see ordering information)

ElectricaL & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm
Rack Mount: 7.0 x 5.0 x 2.0 in., 17.8 x 12.7 x 5.0 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C*

Operating Temp: -10° C to +45° C
Storage Temp: -20° C to +35° C

Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

*

W/O Battery

♦

W/ Battery

*

s

s

System Design

Ordering Information

Part Number Opt. Pwr. Budget Max. Distance*

Multimode

62.5/125µm**

Single Mode
9/125µm

Accessories♦

Options

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.

DT3010
DR3010
DT3020
DR3020

DT3025
DR3030

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-B’ for DR Battery Backup

Description

Contact Mapping Transmitter (850 nm)
Contact Mapping Receiver (850 nm)
Contact Mapping Transmitter (1350 nm)
Contact Mapping Receiver (1350 nm)

Contact Mapping Transmitter (1350 nm)
Contact Mapping Receiver (1350 nm)

Fibers Required

1

1

13 dB

14 dB

2.5 miles (4 km)

8 miles (13 km)

25 miles (40 km)