GE Security DFR-R3-1 Specsheet
Fiber Transmission
Fiber Optic Card Adaptor
Overview
The IFS -R3 Fiber Optic Card Adaptors provide a
cost-effective, hybrid solution when migrating from an
analog platform to a digital platform with IP integration.
These adaptors can be used to install legacy IFS -R3
ber optic cards into DFR Smart Rack card cages.
Available in 1-slot, 2-slot, 3-slot and 4-slot versions,
IFS -R3 adaptors provide complete integration of
existing legacy IFS -R3 ber optic cards into the IFS
Digital Fiber Platform. This allows users to maintain
their investment in legacy IFS ber optic equipment as
they transition to an IFS Digital Smart Rack platform
for digital and IP transmission.
While legacy IFS -R3 ber optic cards cannot provide
health and status monitoring or report module specic
parameters, they are recognizable by the IFS IP
Network Management Module rmware. This module
will display the card’s integration into the Smart Rack
through the browser-based GUI. Additionally, if an IFS
-R3 card has been inserted or removed from a Smart
Rack, the IP Network Management Module will report
any event change through the alarm status log.
Standard Features
• Can be used with 1-slot, 2-slot, 3-slot and 4-slot
IFS –R3 ber optic cards
• Allows users to maintain their investment in legacy
IFS equipment
• Features an integrated power adaptor circuit board
and connector for use with the Smart Rack backplane
• Includes adaptor plate, support columns, screws
and complete installation instructions
IFS -R3
Fiber Optics
Card Adaptor
DFR-R3-1
North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
interlogix.com
ufcreandsecurity.com
Specications subject to
change without notice.
© 2012 Interlogix, A UTC Fire & Security Company.
All rights reserved.
GE and the GE monogram are trademarks of the
General Electric Company and are under license
to UTC Fire & Securit y, 9 Farm Springs Road,
Farmington, CT 06034- 4065
Specications
DFR-R3-1 (For use with IFS 1-slot R3 cards)
Adaptor Plate Dimensions (in./cm.) (HwWxD) Qty. 1 – 7.9 x 6.2 x 1.0 in. (200 x 158.4 x 25 mm)
Standoff Support Columns Qty. 2 – Aluminum alloy (2.95 x 15 mm)
Standoff Screws
Adaptor Plate Screws Qty. 2 – M2 5X6 Philips; Round head
Weight .26 lbs; 0.12kg
DFR-R3-2 (For use with IFS 2-slot R3 cards)
Adaptor Plate Dimensions (in./cm.) (HwWxD) Qty. 1 – 7.9 x 6.2 x 2.0 in. (200 x 158.4 x 50.3 mm)
Standoff Support Columns Qty. 2 – Aluminum alloy (2.95 x15 mm)
Standoff Screws
Adaptor Plate Screws Qty. 2 – M2 5X6 Philips; Round head
Weight .31 lbs.; 14kg
DFR-R3-3 (For use with IFS 3-slot R3 cards)
Adaptor Plate Dimensions (in./cm.) (HwWxD) Qty. 1 – 7.9 x 6.2 x 3.0 in. (200 x 158.4 x 75.7 mm)
Standoff Support Columns Qty. 2 – Aluminum alloy (2.95 x15 mm)
Standoff Screws
Adaptor Plate Screws Qty. 4 – M2 5X6 Philips; Round head
Mini Board 2
Weight .33 lbs; 0.15kg
DFR-R3-4 (For use with IFS 4-slot R3 cards)
Adaptor Plate Dimensions (in./cm.) (HwWxD) Qty. 1 – 7.9 x 6.2 x 3.0 in. (200 x 158.4 x 101.1 mm)
Standoff Support Columns Qty. 2 – Aluminum alloy (2.95 x 15.3 mm)
Standoff Screws
Adaptor Plate Screws Qty. 4 – M2 5X6 Philips; Round head
Mini Board 2
Weight .35 lbs. 16kg
Adaptor Connectors
IFS -R3 connector 3-pin power connector receptacle
Smart Rack (rack-mount) 10-pin smart bus connector
Electrical
Operating Voltage 12VDC
Current Draw Varies by IFS –R3 card used
Environmental
MTBF >100,000 hours
Operating Temperature -40° ~ +70°C
Storage Temperature -40° ~ +85°C
Relative Humidity 0 to 95% non-condensing
Qty. 2 – No. 5-40 Flat head; Length: 24.5 mm;
screw thread:10 mm
Qty. 2 – No.5-40 Flat head; Length: 49.5 mm;
screw thread:10 mm
Qty. 2 – No.5-40 Flat head; Length: 74 mm;
screw thread:10 mm
Qty. 1 – Connectors: 3-pin back plane mating
connector and 2-pin connector at JP2
Qty. 2 – No.5-40 Flat head; Length: 98.5 mm;
screw thread:10 mm
Qty. 1 – Connectors: 3-pin back plane mating
connector and 2-pin connector at JP2
IFS -R3 Fiber Optic Card Adaptor Drawings
DFR-R3-1 DFR-R3-2 DFR-R3-3 DFR-R3-4
Ordering Information
Part
Number
DFR-R3-1 IFS -R3 Fiber Optic Card Adaptor (1-slot)
DFR-R3-2 IFS -R3 Fiber Optic Card Adaptor (2-slot)
DFR-R3-3 IFS -R3 Fiber Optic Card Adaptor (3-slot)
DFR-R3-4 IFS -R3 Fiber Optic Card Adaptor (4-slot)
Note: These units are not suitable for the IFS 4000, 4500, 4700 or 4900 -R3
series product.These modules require a center tap power connection which
is not available with the DFR Smart Rack.
Description
2012/01 (68734A)
Loading...