GE Security DFR Specsheet

F i b e r T r a n s m i s s i o n P r o d u c t s

Rack Mount Card Cage

Overview

The compact Digital Fiber Rack, with optional Power Supply module (DFRP) provides high-density racking for ﬁber-optic modules of DF series and IFS series. Designed to mount in standard 19-inch instrument racks, the rack mount card cage can accommodate the equivalent of 14 (1-slot) modules or 7 (2-slot) modules. All modules located within the chassis rack are hot-swappable, so that modules can be removed or replaced without powering down the rack.

Built-In Power Supply

The model DFRP 19" chassis rack runs on a PS1 internal power supply which accepts an AC input voltage from 100 to 240 VAC, 60/50 Hz. The unit provides a single 12 VDC output and a second power supply can be installed in the digital ﬁber rack to provide redundancy and load sharing. If any unit fails, the remaining supply will take up the full load.

Standard Features

Card cage rack for EIA consoles• Permits local installation of DF models• Permit IFS modules with adaptor plate• Mounts in standard 19-inch instrument racks• Accommodates redundant power supplies• Power supplies equipped with alarm outputs• Blank ﬁller panels available for open slots• Network management system for rack communications•

- Status monitoring and operational management

- Operational level determination and access control

- Network ready for health and connection monitoring

Rack Mount Card Cage

DFRP

DFR

North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566

Asia T 852-2907-8108 F 852-2142-5063

Australia and New Zealand T 613-9239-1200 F 613-9239-1299

Europe T 32-2-719-98-47

32-2-719-98-46

Specifications

Electrical

Power Supply Input 100 ~240 VAC, 50/60Hz

Input Current

Supply Input Connector IEC C14 Chassis-mount socket DC Voltage Output 12 VDC Current Output 12.5A DC (max.) Power Consumption 190VA@115VAC Power Output 150W (max.) Fuse Rating 4A, 250V, Slow-blow Fuse Size 5x20mm, located in pull-out tray on back panel

Connectors

Power input Recessed IEC 320 3-pin male (Cable supplied)

1.66A@115VAC

0.80A@230VAC

Latin America T 305-593-4301 F 305-593-4300

Specifications subject to change without notice.

Mechanical

Number of Slots 17 Dimensions or Module H x W x D 176 x 483 x 219 mm (7 x 19 x 8.76 in)

Construction & Finish

Environmental

Operating Temperature -40º C to +75º C Storage Temperature -40º C to +85º C Relative Humidity 0 to 95% non-condensing

MTBF

MTBF >100,000 Hours

Black colored metal sheets of uniform thickness of 1.5mm (0.06 inches) and with stainless treatment

Ordering Information

DFRP 19" Rack, 115VAC and 230VAC Input (includes power supply) DFR 19" Rack, (no power supply)

Options

DFR-PS1 100 ~240 VAC, 50/60Hz power supply DFR-BPF Blank Panel (1-Slot) DFR-R3-1 Adapter plate R3 for 1-slot IFS product DFR-R3-2 Adapter plate R3 for 2-slot IFS product DFR-R3-3 Adapter plate R3 for 3-slot IFS product

2010/03 (61159L)