GE Security DFDMM004-RX, DFDMM004-TX, DFDSM004-RX, DFDSML001-RX, DFDSML001-TX Specsheet

...
Page 1
Fiber Transmission Products
Bi-directional Data Transmitter/Receiver
Overview
The data series fiber transmission products support optical transmission of bi-directional data up to 4 channels through one fiber either in multi-mode or single-mode. Adjustment and maintenance free, these modules are designed to support data interface.
A cost-effective single unit design, this product is well-suited for in field configuration and also accommodates installation and system growth while delivering long operating distances of up to 60 Km. Featuring robust construction well suited for harsh environments the unit is available in both rack mount and wall mount configuration. Plug-and-Play design ensures ease of installation requiring no electrical or optical adjustments.
Standard Features
Data
Supports one or four bi-directional data• Supports multi-protocol data in RS232, RS422 & RS485 • 2 or 4-Wire Tri-state formats External access for data format selection via DIP switches•
•
LEDs
Duplicated LED indicators on the front and rear of the unit for • the convenience of observation
Network management system for rack communications
Web browser support• Systems data performance monitoring• System devices and components Transmitters, Receivers, • Modules, etc. status monitoring and operational management LAN, Ethernet networking capabilities• IP addressable• Alarm activation, execution, message responding and reporting• Operational level determination and access control • Network ready for health and connection monitoring•
Others
Adjustment and maintenance free• Unique modular design for in field configuration to match • installation and system growth Long distances operation up to 60Km • No setup just plug-and-play• Excellent suppression of EMI & RFI and elimination of ground loop• Transient voltage protection on power supply and all signal inputs • & outputs Robust design for harsh environment applications•
Single- or Four-Channel
Bi-directional Data Transmitter/
Receiver
Page 2
Specifications
Data
Data Direction Bi-directional Duplex Data Interface RS232, RS422, RS485 2 or 4-wire Tri-state Selection Method DIP switch-selectable Data Rate 0~115,200bps Data Protocol Protocol transparency Line Carrier Detection RS485 (2/4-wire) Tri-state output Data Tx & Rx Status Green/Red LED lit Input/ Output Connectors 7-pin screw terminals
Optical
Wavelength 1310 and 1550 Number of Fiber 1
Tx Output Power:
Single Mode (40Km) 1310nm & 1550nm -9dBm ± 3 dBm Multi-Mode (4Km) 1310nm & 1550nm -7dBm ± 2 dBm
Optical Buget:
Multi-mode (62.5μm/125μm) 12dB
Single-mode (9μm/125μm)
Single-mode (9μm/125μm) Long Haul
Transmission Distance:
Multi-Mode (Limited by Fiber Bandwidth) 4Km (DFVMMD101-T/R & DFVMMD102-T/R) Single-Mode (Limited by Fiber Bandwidth) 40Km Fiber Connector (Standard Supply) ST
18dB (wavelength in 1310nm) 14dB (wavelength in 1550nm)
25dB (wavelength in 1310nm) 19dB (wavelength in 1550nm)
Mechanical
Dimensions or module HxWxD in mm
Shipping weight
Environmental
Operating Temp -40 C to +75 C Storage Temp -40 C to +85 C Relative Humidity 0 to 95% non-condensing
Power Requirement
Supply Voltage
Cord protection Poly Fuse (1A) Current Consumption Max. 500mA
a)25.4 x 158.4 x 231.8 1-Slot b) 50.8 x 158.4 x 231.8 2-Slot
a) 0.74kg 1-slot b) 1.07kg 2-slot
12VDC Standalone: Derived from an external adaptor via the 2-pin connector at rear of the module. Rack chassis: derived from the chassis PSU via the 30-pin connector at rear of the module.
Page 3
Application Diagram
Cable connection of DFDSM004-TX/RX, DFDSML004-TX/RX and DFDMM004-TX/RX
Model Number Key
DF 10 bit rack/module F 8 bit rack/module MF 8 bit module only V Video D Data A Audio CC Contact Closure
SM Single mode MM Multimode L Long distance D Duplex
First digit Number of video channels Second digit Number of audio channels Third digit Number of data channels Forth digit Number of contact closures T Transmitter R Receiver
Part Number Key
DFD M( L ) 00
Optical type S Single Mode M Multi Mode
Number of Data Channels 1 4
Data type TX Transmitter RX Receiver
Page 4
North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566
Asia T 852-2907-8108 F 852-2142-5063
Australia and New Zealand T 613-9239-1200 F 613-9239-1299
Europe T 32-2-719-98-47
32-2-719-98-46
F
Latin America T 305-593-4301 F 305-593-4300
Specifications subject to change without notice.
© 2010 General Electric Company All Rights Reserved
Ordering Information
Fiber Type
(I) Single-mode
(9/125μm)
(II) Single-mode (9/125μm For
Long Distance Transmission)
(III) Multi-mode
(62.5/125μm)
Part Number
(i) 1DDFDSM001-TX 1-Ch. Bi-directional
DFDSM001-RX 1-Ch. Bi-directional
(ii) 4DDFDSM004-TX 4-Ch. Bi-directional
DFDSM004-RX 4-Ch. Bi-directional
(i) 1DDFDSML001-TX 1-Ch. Bi-directional
DFDSML001-RX 1-Ch. Bi-directional
(ii) 4D DFDSML004-TX 4-Ch. Bi-directional
DFDSML004-RX 4-Ch. Bi-directional
(i) 1DDFDMM001-TX 1-Ch. Bi-directional
DFDMM001-RX 1-Ch. Bi-directional
(ii) 4DDFDMM004-T 4-Ch. Bi-directional
DFDMM004-RX 4-Ch. Bi-directional
Description Opt. PWR. Budget dB Max.
1310nm
1550nm
Distance
(Km)
18 14 40 1
Data Transceiver
18 14 40 1
Data Transceiver
18 14 40 2
Data Transceiver
18 14 40 2
Data Transceiver
25 19 60 1
Data Transceiver
25 19 60 1
Data Transceiver
25 19 60 12
Data Transceiver
25 19 60 2
Data Transceiver
12 12 4 1
Data Transceiver
12 12 4 1
Data Transceiver
12 12 4 2
Data Transceiver
12 12 4 2
Data Transceiver
No.
of
slots
Accessories DFR. 19' Rack mount chassis purchased separately for housing modules Options ST type connector is standard
Notes: Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices
and the fibers within the network. Operating distance of multimode is limited by the characteristics of the fiber bandwidth
2010/02 (61159h)
Loading...