Page 1
®
System Design
IFS
Line / Fiber Transmission
DED2500 Series
IFS Universal Ethernet Bi-Directional
Data Transceiver
OVERVIEW
T
he IFS DED2500 Series data transceiver supports bi-directional
data transmission over multimode, single mode optical fiber, or
electrical. The modules are compatible with RS-232, and 2-wire
or 4-wire RS-485 data interfaces and all major data protocols. The
unit converts common standard serial data to Ethernet data to
be transported over Ethernet networks. Web based configuration
ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates status indicating LED’s for
monitoring of proper system operation. The modules are available in
stand-alone only.
APPLICATION EXAMPLES
• Data Control Over Ethernet
• Data Conversion
SYSTEM DESIGN
STANDARD FEATURES
• Digitally Encoded Data Transceiver
• Supports RS-232, or RS-485 (2-wire or 4-wire) Data Interfaces
• Data Rates to 115,200 bps
• Web Based Configuration
• No In-field Electrical or Optical Adjustments Required
• LED Status Indicators For Monitoring All Critical Operating
Parameters
• Automatic Resettable Fuses on all Power Lines
• Distances up to 28 Miles (45km)
• Comprehensive Lifetime Warranty
Host
Control
Data
DED2500-EM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 1.2 miles
(2 km)
1 Fiber
62.5/125μm MM
100 FX
DED2500-EM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Control
Data
interlogix.com
Page 2
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
DED2500 Series
IFS Universal Ethernet Bi-Directional Data Transceiver
Ordering Information
Electrical DED2500-E 10/100 Mbps Ethernet N/A N/A 1000 ft. (300 m)
Multimode 62.5/125µm** DED2500-EM Data Transceiver (1310 nm) 2 13 dB 1.2 miles (2 km)
Single Mode 9/125µm DED2500-ES
Accessories ♦
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Data
Data Interface: RS-232, RS-422, 2 and 4 wire RS-485 with Tri-State
Data Format: 7-8 Bit Data, Parity, Stop Bit Selectable
Data Rate: 9,600 - 115,200 bps
Bit Error Rate: <1 in 10° @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
Wavelength
Opticalemitter
Number Of Fibers
Connectors
Power: Terminal Block with Screw Clamps
Optical: ST
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 300 mA
Rack: From Rack
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.18 x 3.96 x 1.0 in., 10.62 x 10.06 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
1000 Mbps Ethernet (1310 nm
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
1310 nm, Multimode or Single Mode
LED
2
) 4 15 dB 28 miles (45 km)
Latin America
T 561-998-6114
Interlogix is part of UTC Building & Industrial Systems,
Code of Federal Regulations, Subchapter J
Specifications subject to change without notice.
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
Standard for Laser Products, Title 21,
interlogix.com
All rights reser ved.
DED2500 Series
Loading...