GE Security B701VET-RST Specsheet
GE
Fiber Optic
Security
Overview
The B701VE provides a high performance transmission link for
composite or component wide band signals. Systems utilizing high
line-rate (1025) imaging systems can benefit from the transparent
transmission medium offered with the B701VE series. Graphic
workstations and signals with embedded carriers for audio are also
supported. This unit is the best choice for video-only fiber designs.
Rack or Standalone Models
The B701V is available as a standalone unit and as a rack
card for use in the 515R1/517R1 rack mount card cages.
Superior Diagnostics
The SMARTS™ diagnostic technology provides builtin diagnostic tools including LEDs that monitor the
operating status of the video and optical signals.
Wideband Video
Transmitters and Receivers
Standard Features
• One-way video transmission over one multimode fiber
• Supports NTSC and PAL video formats
• Video SNR >55 dB
• 10 to 35 MHz video bandwidth
• Optical AGC
• 13 dB optical budget
• Operating distance up to 3.2 miles (5.2 km)
• Standalone or rack configurations
1-Channel
Wideband Video
B701VE
GE
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Video
Channels 1
Format NTSC and PAL
Input/Output Signal 1.0V p-p composite
Signal-to-Noise Ratio >55 dB
Input/Output 75 ohms
Impedance
Differential Phase 3°
Differential Gain 3%
Optical
Mode Multimode
Optical Budget∗ 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance∗∗ 3.2 mi (5.2 km)
Modulation Type Intensity Modulation
Gain Control Optical Automatic
Gain Control (OAGC)
Electrical
Input Power Standalone Units: 13.5
VDC reg. / 12-14 VAC
Input Power Rack Units: 13.5 VDC
regulated
Current Requirement 200 mA (receiver), 50
mA (transmitter)
Power Consumption 3 W (receiver), 0.75 W
(transmitter)
Power Factor 2 (receiver);
1 (transmitter);
(rack units only)
Protection Solid-state short
circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167° F
(-40 to 75° C)
Maximum Humidity 95% relative,
noncondensing
Mechanical
Dimensions (LWD)
Standalone Units 5.0" x 2.8" x 1.5"
127 x 71 x 38 mm
Rack Units 1 slot (1.0")
Weight Standalone 0.28 lbs.
(0.13 kg);
Rack 0.49 lbs. (0.22 kg)
Construction Plastic (standalone)
Aluminum (rack)
Related Diagram Ordering Information
Use the Configurator below to select the options available for this product.
Video In
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
B701VE-2006-09-2
Transmitter
Optical Fiber
imagination at work
imagination at work
Receiver
Video Out
B701VE
Receiver
Product Type Enclosure
T Transmitter E Standalone (Transmitters only)
R Receiver R Rack Card
-
ST
Loading...