GE Security AP633, AP633A Specsheet
Mirror Optic PIR
200’ Long-Range | 80’ and 40’ Wide-Angle
AP633A
www.GE-InterlogixSecurity.com
GE Motion Sensors
Product Information
The AP633A adaptive passive infrared detector features an
advanced optical design that provides a far larger coverage area
than conventional sensors. This enables installers to use just
one sensor in applications where two or more sensors are
normally required.
The savings in equipment, wiring and labor costs can be
substantial. The step-focus design of the AP633A PIR is so
precise that detection at 200 feet is as consistent as at 10 feet.
Simple clip-on mirror masks allow installers to select from 12
coverage patterns.
Utilizing “4D” signal processing, the AP633A sensor analyzes size,
speed and shape, identifying the characteristic patterns of human
movement. False signals from environmental disturbances, such as
static heat sources, air turbulence from heaters or air conditioners,
visible light or rapid background temperature fluctuations, are
rejected. Slow noise buildup (e.g., environmental temperature
stability) is recognized and suppressed before it can destabilize
the sensor. Shocks and spikes are also recognized and suppressed
due to the adaptive alarm threshold.
The sophisticated processing of the AP633A makes these sensors
extremely consistent in detecting fast or slow moving targets as
well as operating in elevated temperatures. All coverage patterns
include a full 40-foot center curtain, making it impossible for
intruders to crawl or slide under the sensor without detection.
Overview
Standard Features
200' long range and 80' wide-angle combined in
one sensor
On-site selection of 12 coverage patterns
Microprocessor controlled “4D” processing analyzes
size, speed, shape and floating alarm threshold
Adaptive Passive Infrared Technology ensures stable
detection in harsh environments
Mirror Optic PIR
200’ Long-Range | 80’ and 40’ Wide-Angle
AP633A
©2002 GE Interlogix. All other trademarks are properties of their owners.
P-2993-5000KA-0802
GE Interlogix
www.GE-InterlogixSecurity.com 2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5484
Technical Service: 800-777-2624
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
200’ Long-Range/ 80’ and 40’ Wide-Angle PIR Form C relay rated 100mA @ 28VDC with 33ohm
current-limiting resistor in series with the common, 12 coverage patterns, tamper
Ceiling/ Wall mount swivel mount bracket (optional accessory)
AP633A
BR601
Ordering Information
Model Description
2.95”
7.5 cm
4.13”
10.5 cm
6.3”
16.0 cm
40ft*
12.2m
80ft
24.4m
200ft
61.0m
80ft
24.4m
200ft
61.0m
80ft
24.4m
40ft
12.2m
200ft
61.0m
80ft
24.4m
80ft
24.4m
80ft
24.4m
40ft
12.2m
40ft
12.2m
200ft
61.0m
80ft
24.4m
*40ft. center zone provides true solid 3D curtain with lookdown
Dimensions
Lens Coverage
Specifications
Operating voltage 9.5-15VDC
Max ripple 2V peak to peak
Current consumption Normal operation, 13mA;
In alarm, LED on 25mA
Alarm output Form C relay rated 100mA @ 28VDC,
33ohm current-limiting resistor
in series with the common
Tamper output Rated 100mA @ 28VDC
LED May be enabled or disabled
by a jumper inside the sensor
Mounting height 6'–10' (1.8m – 3m)
Dimensions 6.3 x 4.13 x 2.95"
(160 x 105 x 75mm)
Note: On UL certified systems, a UL Listed power supply or a Listed control capable of
providing a minimum of 4 hours of total standby power must be used. 20mA should be
assumed for this calculation.
2
1
4
3
5
6
2
3
2
1
4
3
6
1
4
3
5
6
2
1
4
3
1
4
6
1
4
6
2
3
6
4
3
5
6
2
4
3
5
6
U
L
LISTED
Loading...