GE Security 6255FM-W, 6257FM-W Specsheet

Flush Mount SureShot™ PIR
6250FM Series
www.GE-Interlogix.com
GE Motion Sensors
Product Information
Standard Features
The only flush mount with both 360° ceiling and wall mount coverage
Five coverage patterns included:
- Wide angle
- Single spot
- Pet alley
- Vertical barrier
- 360° ceiling
Model Numbers
6255FM, 6257FM
GE's 6250FM Series Flush Mount SureShot™ can be pre-wired for
wall or ceiling installation. The unit is attractively designed for a
slim, flushed appearance and will neatly fit into a standard single
gang box, remodel box or rough-in plate in two easy steps.
The 6250FM comes complete with four masking plates to easily
select the following coverage patterns; wide angle, single spot,
pet alley, vertical barrier and 360° ceiling mount.
This detector is an advanced PIR that is highly sensitive to moving
infrared sources while offering increased immunity to RFI,
vibration, static, stray light, rapid temperature changes, and other
false alarm sources.
It features a sequential processor that combines bi-directional
pulse counting and motion verification. Combining this with an
opaque, high resolution Fresnel lens provides the high quality,
reliability and performance that all GE products carry.
Overview
Flush Mount SureShot™ PIR
6250FM Series
©2003 GE Interlogix. Sureshot is a trademark of GE Interlogix. All other trademarks are properties of their owners. P-2017-2000KA-0103
Specifications
Electrical
Voltage 7 to 16V DC Current 8 mA typical, 10mA max. Maximum loop rating 16V DC, 50mA Alarm output Fail safe contacts w/ 10 Ohms in series,
6255 - Form A, Normally Closed (N.C.) 6257 - Form C, Normally Closed and Open (SPDT)
Alarm duration 2 to 5 seconds Cover tamper contacts Normally Closed, rating: 50mA
Environmental
Operating temperature 0°F to 120°F (-17°C to +50°C) Humidity 0% to 90% noncondensing RFI immunity greater than 10 V/meter from 1 to 1000MHz Static/lightning immunity 2.5kV, 2 joules max. energy impulse,
1 msec rise / 50 msec decay
Features
Pulse count Bi-directional, 1 zone (2 pulses)
with Motion Verification
Range
Wide Angle (90°) 30' x 30' (9.14m x 9.14m) Single Spot 40' (12.19m) range Vertical Barrier 40' (12.19m) range Pet Alley (90°) 30' (9.14m) range 360° Ceiling 15' x 20' (4.57m x 6.10m) at 8' (2.44m) high
16' x 30' (4.88m x 9.14m) at 12' (3.65m) high Ceiling mounting height up to 12' (3.65m)
Mounting Wall, corner or ceiling LED indicator Walktest Dimensions 4.5" H x 2.75" W x 1.63" D
(114mm) x (70mm) x (41mm)
1.37" (35mm) depth behind wall .25" (6.4mm) depth in front of wall
Color White/white
GE Interlogix
www.GE-Interlogix.com 2266 Second Street North
North St. Paul, MN 55109 Phone: 651-777-2690 USA & Canada: 800-777-5484
12345 SW Leveton Drive Tualatin, OR 97062 Phone: 503-692-4052 USA & Canada: 800-547-2556 Technical Service: 800-648-7424 Faxback: 800-483-2495
Dimensions
Lens Coverage
Normally Closed N.C. Normally Closed or Open SPDT (N.C. and N.O.)
6255FM 6257FM
Ordering Information
Model Loop Type Electrical Configuration
Top View
0
10' 20' 30' 40'
3.0m 6.1m 9.1m 12.2m
Side View
7'
2.1m
0'
30'
9.1m
40'
12.2m
20°
38.4°
54°
20°
38.4°
54°
With Single Spot Mask
0'
10°
40'
12.2m
Side View
0 10' 20' 30' 40'
3.0m 6.1m 9.1m 12.2m
7'
2.1m
Top View
0 10' 20' 30' 40'
3.0m 6.1m 9.1m 12.2m
Side View
3' .91m
90°
30'
9.1m
40'
12.2m
Top View
0
10' 20' 30' 40'
3.0m 6.1m 9.1m 12.2m
7'
2.1m
Side View
0'
10°
40'
12.2m
360° Ceiling Mount
Note: Intruder must enter coverage pattern 3-4’ (1-1.2m) to cross one zone for detection of alarm. False alarm sources, such as heaters, should be kept out of the coverage pattern.
Top View
Side View
7'
2.1m
010' 20' 30' 40'
3.0m 6.1m 9.1m 12.2m
0' 90°
30'
9.1m
40'
12.2m
Top View
Wall Mount No Mask
With Wide Angle Mask
With Pet Alley Mask
With Vertical Barrier Mask
Lens Coverage
2.75"
70mm
1.63"
41mm
4.50"
114mm
4.50"
114mm
.25"
6.4mm
1.37"
35mm
Capture
Zone
15' (4.59m) x 20' (6.12m)
Capture Zone
25' (7.5m) Diameter
Coverage Pattern
8'
(2.4m)
Loading...