German Knife GG22 User Manual

For service contact:

German Knife Inc.

1-800-500-3519

www.turboairinc.com

OWNER & OPERATOR
INSTRUCTION MANUAL

Model No.

GG-22

IMPORTANT SAFETY NOTICE

To ensure safe and trouble free performance of you new
German knife slicer, we suggest that all personnel who will
use and maintain the slicer read and understand the manual
before operating the equipment. Should there be any
questions or if we can be of further assistance, please call us
toll free at [phone].

www.turboairinc.com

TABLE OF CONTENTS

GG-22 Meat Grinder Instruction Manual

PAGE

Inspection

Standard Features

Specifications

Operator Safety

Assembly and Operating Instructions

GG-22 Meat Grinder Parts List

Warranty Information

3

3

3

4

4 - 5

6 - 8

9

German Knife Inc

4184 E. Conant St., Long Beach, CA 90808

Phone : [phone]

Fax : [phone]

www.turboairinc.com

2

GG-22 MEAT GRINDER INSTRUCTION MANUAL

INSPECTION

All GG-22’s are inspected prior to packaging to assure both the machine quality, correct inclusion of
options, and proper voltage (115V). However, upon unpacking, all items should be carefully verified that
they are correct. Any damage, imperfection, or shortages should be reported immediately to your dealer
or directly to German Knife Customer Service, and/or shipment carrier.

STANDARD FEATURES

• 115 Voltage

• 1

1/2 HP Motor

• 16 Lbs. per minute capacity

• Ideal for “On demand” Meat chopping for processing fresh, boned meat.

• Can be fed at a rapid pace with continuous chopping action and no crushing or mashing of the meat.

• All parts which contact food are easily accessible and readily removable for convenient cleaning
without the use of tools.

• Grinder machine will not operate when feed pan is removed.

SPECIFICATIONS

MOTOR : 1

provided through two openings in the base covered by perforated metal screen (1.16” diameter holes).
Single phase is capacitor-start, induction-run type.

SWITCH SYSTRM : Power switch - conveniently mounted at side of machine. Inter-lock switch - located
under feed pan.

TRANSMISSION : Precision made gears and shafts mounted on ball bearings are fully enclosed in the
transmission case, packed with a special oils at the factory. Smooth, quiet operation is assured for years
of normal operation. The attachment hub has a double seal, designed to exclude meat juices or water
from the transmission. Final out worm gear speed is 143 R.P.M
⁕ Use and supply oil type : API GL-5 (Gear oil)

CHOPPING : GG-22 has a protective type chopping end, with cylinder of the spiral-fluted design. A
heat-treated steel knife and plate and feed stomper.

1/2 HP. has grease-packed ball bearings. Protected by machine enclosure, ventilation is

3