GE P&W PRO AP Series 60 Hz User Manual
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
AP-FSpwPRO_AP_Series_60Hz_EN.doc Apr-13
Fact Sheet
PRO AP Series 60 Hz
Reverse Osmosis Machines from 11 to 102 m3/hr
Instrumentation
Flow Meters Permeate, concentrate
Conductivity Permeate
Pressure Pre-filter, post-filter, primary,
final, permeate, concentrate,
pump discharge
Pressure Switch Feed, permeate, concentrate
pH (Optional) Feed
ORP (Optional) Feed
Instrument Center Signet 8900
Basic Features
1000 mg/L feed TDS and 20C water tempera-
ture design
GE Intelligent Platforms' VersaMax Micro PLC
with 6-inch QuickPanel monochrome
touchscreen.
Xylem SV high pressure pump
Communication: RS232/DH485
4-20 mA instrument display on instrument
center
Materials of Construction
High-pressure piping 316 SS, Sch. 10
Low-pressure piping PVC, Sch. 80
Frame Painted blue carbon steel
Enclosure IP54 (painted carbon steel)
Options Available
Premium controls and instrument package
pH and ORP sensors added to Basic package
Skid mounted motor starter (Wye-Delta) added
to basic package
High Rejection Membrane Elements
PRO Clean-in-Place units
Allen Bradley PLC and HMI packages
Grundfos CRN high pressure pump(s)
Documentation Included
Operation and maintenance manual
Drawings: piping and instrumentation, electrical
and general dimension
Operating Parameters
Design Recovery1 75%
Design temp. 20ºC
Operating range 2 to 30ºC
Nominal rejection 97-99%
Design inlet pressure 2-4 bar
1
Recovery Rate can vary +/- 5%
MODEL
PRO-11-AP-60
PRO-23-AP-60
PRO-34-AP-60
PRO-45-AP-60
PRO-68-AP-60
PRO-102-AP-60
Permeate rate: 2
Concentrate Rate:
Feed Rate:
11.4 m3/hr
3.8 m3/hr
15.1 m3/hr
22.7 m3/hr
7.5 m3/hr
30.2 m3/hr
34.1 m3/hr
11.4 m3/hr
45.4 m3/hr
45.4 m3/hr
14.9 m3/hr
60.4 m3/hr
68.1 m3/hr
22.7 m3/hr
90.8 m3/hr
102.2 m3/hr
34.1 m3/hr
136.3 m3/hr
Pumps and Motors
Manufacturer:
Model:
Quantity:
Motor HP:
Design Flow Rate:
Design boost pressure:
Xylem
15SV07N1106T
1
11 kW
18.2 m3/hr
12.4 bar
Xylem
33SV4N1856T
1
18.5 kW
32.4 m3/hr
12 bar
Xylem
46SV4N3006T
1
30 kw
45.4 m3/hr
12.6 bar
Xylem
66SV4/2AN3706T
1
37 kw
64.9 m3/hr
12 bar
Xylem
46SV4N3006T
2
2 x 30 kW
90.8 m3/hr
12.6 bar
Xylem
66SV4N3706T
2
2 x 37 kW
136.3 m3/hr
13.6 bar
Membrane Elements and Housings
Membranes quantity:
Memb. housing style:
Banking Arrangement:
12
4 element long, 4 port
111
24
4 element long, 4 port
321
36
6 element long, 4 port
321
48
4 element long, 4 port
642
72
6 element long, 4 port
642
108
6 element long, 4 port
963
Cartridge Filtration
Cartridge Filter:
Filter Length:
Filter Quantity:
RO.Zs01-40
102 cm (40”)
7 per housing
7/change out
RO.Zs01-40
102 cm (40”)
7 per housing
7/change out
RO.Zs01-40
102 cm (40”)
7 per housing
14/change out
RO.Zs01-40
102 cm (40”)
7 per housing
14/change out
RO.Zs01-40
102 cm (40”)
7 per housing
21/change out
RO.Zs01-40
102 cm (40”)
7 per housing
28/change out
Installation and Utility Requirements
Inlet:
Permeate:
Concentrate:
Inlet Water Pressure:
Air Pressure:
Drain to be Sized for:
Power:
Control Circuit:
ANSI 2" flange
ANSI 2" flange
ANSI 1.5" flange 2.1 2
bar min.
6.9 bar, oil-free
15.1 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
ANSI 3" flange
ANSI 3" flange
ANSI 1.5" flange
2 bar min.
6.9 bar, oil-free
30.2 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
ANSI 3" flange
ANSI 3" flange
ANSI 1.5" flange
2 bar min.
6.2 bar, oil-free
45.4 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
ANSI 4" flange
ANSI 3" flange
ANSI 2" flange
2 bar min.
6.2 bar, oil-free
60.4 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
ANSI 4" flange
ANSI 4" flange
ANSI 2" flange
2 bar min.
6.9 bar, oil-free
90.8.0 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
ANSI 6" flange
ANSI 4" flange
ANSI 3" flange
2 bar min.
6.9 bar, oil-free
136.3 m3/hr
380-480 VAC, 3-ph, 60Hz
110-230 VAC, 1-ph, 60Hz
Skid
Approx.Height:
Approx. Width:
Approx.Depth:
Approx. Shipping
Weight :
2000 mm
800 mm
4900 mm
1543 kg
2200 mm
900 mm
5050 mm
2132 kg
2240 mm
950 mm
6850 mm
2722 kg
2240 mm
1250 mm
5200 mm
3085 kg
2420 mm
1400 mm
6950 mm
4490 kg
2475 mm
1850 mm
7080 mm
6124 kg
Membrane Elements and Housings
Membrane model AG8040F
Style Spiral-wound elements
Membrane manufacturer GE
Membrane type TFC (Polyamide)
Average membrane flux1 28 lmh (16.4 gfd)
Membrane rejection 99.0-99.6%
Housing manufacturer Wave Cyber or Equal
Housing material FRP
1
Flux can be reduced to 25.5 lmh (15 gfd) by using 400sqft
elements. Rated flow can be further reduced by up to 20%.
GE PRO-AP-60hz Models
Cartridge Filtration
Housing model 7 Rounds, 102cm (40“)
Housing material 316 SS
Cartridge filter 1-micron nominal, ROsave.Z*s
2
Maximum permeate rate listed at design temperature. Permeate rate can be reduced by up to 20%
Fact Sheet Page 2
Loading...