FuelSolv* FMG 2960
Reducing Slagging in Western Coal-Fired Utility Boilers
Description and Use
FuelSolv FMG2960 is a specially engineered chemical additive designed to reduce slagging in utility
boilers using western coals, and is being used in
numerous industrial facilities around the world,
including large coal fired utility boilers.
Slagging
Slagging occurs in the convection areas of the furnace, and is caused by the collection of ash on the
boiler tubes and internal surfaces inside the furnace, which in turn crystallizes and hardens,
thereby reducing the heat transfer efficiency. If not
corrected, it can cause damage to the internals of
the furnace when the slag breaks off and falls away
to the bottom of the furnace. In order to avoid
forced outages, plant owners employ down-powers
to remove slag during off-peak hours, thereby reducing the unit’s availability for dispatch.
Application
Implementation
GE provides all necessary plant assessment, chemicals, and equipment for applications, to apply
FMG2960 to the coal on the conveyor belts. In addition, GE utilizes our Advanced Combustion Engineering (ACE) methodology, which uses actual plant
data to assess the effectiveness of the application.
ACE uses GE’s InSight* monitoring and diagnostics
platform, and is available for both onsite and offsite
applications.
Customer
Benefits
FMG2960 is a special chemical formula that is
applied to the coal on the conveyor belt. After mixing with the coal, it is injected into the furnace
along with the coal. The key to reducing slagging is
to reduce sintering – which is the coalescence of
deposited particles and bonding. As sintering progresses, it results in increasing deposition strength.
FMG2960 promotes crystallization at the ash
surface, which increases the slag porosity, and
promotes cracking at the surface of the ash,
thereby making the slag easier to remove with
soot blowers.
Find a contact near you by
visiting www.ge.com/water or
e-mailing custhelp@ge.com.
©2007, General Electric Company. All rights reserved.
*Trademark of General Electric Company; may be registered in one or more countries. CB1128EN Jul-07
Global Headquarters
Trevose, PA
+1-215-355-3300
Support Team
Product Line Leader Telephone
Eric Thungstrom 215-942-3392
Technical Support Telephone
Jeff Peters 719-338-9885
Americas
Watertown, MA
+1-617-926-2500
Europe/Middle East/Africa
Heverlee, Belgium
+32-16-40-20-00
Asia/Pacific
Shanghai, China
+86 (0) 411-8366-6489