GE P&W E-Series Pretreatment User Manual
E-Series Pretreatment
Water Softeners
Ideal for commercial and light industrial applications, E-series pretreatment is designed for durable
operation, easy installation and straightforward
control. The units are also the perfect compliment
to the E-Series line of reverse osmosis systems. Visit
www.ge.com/water for more information.
General Features
• Single tank and alternating systems provide
flexible flow options
• NSF 44 certified fiberglass reinforced plastic
(FRP) tanks (150 psig design pressure, non-code)
• Brine tank with cover and air check valve
• GE Autotrol* multi-port valves (Performa or Mag-
num Cv*) with integrated flow meter
• Programmable GE Logix 764 controller for regeneration sequence control
• Communication switch for downstream equipment included to prevent operation during regeneration on single systems
• Hardwater bypass during regeneration for single Performa softener units only
• Interlock provided on alternating systems to
maintain continuous flow during regeneration
• Manual or volume-initiated automatic regeneration for salt savings
• 120 VAC 60 Hz or 230 VAC 50 Hz models available
Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2008, General Electric Company. All rights reserved.
AM-FSpwESeriesWaterSoftener_EN.doc Sep-08
Table 1. Specifications1
Part Number2
Model
Single Alternating
Connec-
tions
(inches)
Valve
Tank
(inches)
Overall
Height
(inches)
Brine Tank
Dimensions
(inches)
Capacity
(lbs)
Flow
(gpm)
Min Max BkWsh
Resin
Volume
(ft3)
Capacity
(grains)
S10 3023718 3023719 1 Performa 10 x 52 62 18 x 40 700
S14 3023720 3023721 1 Performa 14 x 65 73 18 x 40 700
S21 3023722 3023723 2 Magnum 21 x 62 78 24 x 50 1000
S30 3023724 3023725 2 Magnum 30 x 72 83 30 x 50 1500
S36 3023726 3023727 2 Magnum 36 x 72 84 39 x 48 2500
1
Specifications listed are per individual tank
2
Part numbers listed are for 60 Hz units only
Figure 1. E-Series Water Softener Flow Range
S36
S30
S21
3
=2-4 gpm/ft
2 8 2.5 1.5 45K
5 15 5 3 90K
9 30 12 6 180K
23 75 25 15 450K
30 90 35 20 600K
S14
=1.5-2 or 4-5 gpm/ft3
S10
0 102030405060708090100
Flow Rate (gpm)
Page 2 Fact Sheet
Loading...