GE P&W E-Series L User Manual

Fact Sheet

Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

©2013, General Electric Company. All rights reserved.

FS1145EN.doc Jul-13

Operating Pressure

8-16 bars

Operating Pressure (CW)

15-22 bars

Maximum Recovery

75%

Nominal Rejection

98% - 99.5%

Typical operating Temperature

10-30C

Minimum Inlet Pressure

2 bars

Design Temperature**

25C

Design Temperature** (CW)

13°C

Design Salinity

2,000ppm NaCl

E-Series L

Large Reverse Osmosis Machines, 3 to 23 m3/hr

Features

 Low Energy High Rejection membrane elements
 Micron rated pre-filter
 Automatic inlet shut-off valve
 Permeate purge on shut down (can be disabled)
 Emergency stop and motor thermal protection

Figure 1: E4H-CE-L, 3 to 7 cubic meters per hour

Figure 2: E8-CE-L, 9 to 23 cubic meters per hour

GE Water & Process Technologies has more than 30
years experience in designing and building high
quality reverse osmosis systems. Our E-series RO
machines (Figures 1 and 2) are designed for durable
operation, high quality product water production,
easy installation and straightforward control.

Instrumentation and Controls

 PLC based control system
 Two-source power connection for Motor starter

and for Control Panel

 Permeate and concentrate flow meters
 Digital permeate conductivity meter
 Digital pH meter
 ALARMS: Low inlet pressure, motor starter

overload, high temperature (38°C), high
permeate conductivity, High permeate
pressure, high pH

 Remote machine on/off capability
 Pre-filter, post-filter, pump discharge, primary,

and final pressure gauges

Table 1: Operating Parameters

E-Series-CE-L machines are designed in 2 versions
of operating temperatures: 25°C and 13°C (CW).

General Properties

Typical Applications

 Boiler feed water
 Ion exchange pre-treatment
 Process ingredient water

** Varying the operating temperature will affect machine productivity

Frame

Painted Carbon Steel

Membrane
Elements

AK90 or
AK400

Membrane Housing

fiberglass reinforced plastic (FRP)

Low Pressure Pipe

Schedule 80 PVC

High Pressure Pipe

Schedule 10 316Stainless Steel

Control Enclosure

IEC 66

Motor Starters

IEC 66

Pump Manufacturer

Tonkaflo*

Pump Type

Multi-stage, centrifugal

Materials

SS shell/housing, Noryl* internals

Castings

SS inlet/discharge

Motor

3-phase, TEFC, 400 VAC, 50 Hz

Model

E4H-CE-3 L

E4H-CE-3 L CW

E4H-CE-5 L

E4H-CE-5 L CW

E4H-CE-7 L

E4H-CE-7 L CW

E8-CE-9 L

E8-CE-9 L CW

E8-CE-14 L

E8-CE-14 L CW

E8-CE-23 L

E8-CE-23 L CW

Part Number

1232267 /

3061828

1232268 /

3061829

1232269 /

3061840

1232259 /

3061841

1232260 /

3061842

1232261 /

3061843

Flow Specifications

Recovery Range:
Permeate Rate: m3/h
Concentrate Rate: m3/h

50-75%

3

3-1

50-75%

5

5-2

50-75%

7

7-3

66-75%

9

5-3

66-75%

14

7-5

66-75%

23

12-8

Membrane Elements and Filters

Membrane Quantity (Array)
Membrane Type
Pre-Filter Quantity
Pre-Filter Model

9 (2-1)
AK-90

2

LD05-20

15 (3-2)

AK-90

2

LD05-20

24 (5-3)

AK-90

2

LD05-20

8 (1-1-1)

AK-400

7

RO.Zs 01-20-XK

12 (2-1-1)

AK-400

7

RO.Zs 01-30-XK

20 (3-2)
AK-400

7

RO.Zs 01-40-XK

Connections

Inlet: mm
Permeate: mm
Concentrate: mm

DN 40

DN 25
DN 25

DN 40
DN 25
DN 25

DN 40
DN 25
DN 25

DN 50
DN 50
DN 40

DN 50
DN 50
DN 40

DN 80
DN 50
DN 40

Dimensions & Weights

Height: mm (inch)
Width: mm (inch)
Depth: mm (inch)
Shipping Weight

Estimate: kg (lb)

1702 (67)

3378 (133)

914 (36)

550 (1200)

1702 (67)

3378 (133)

914 (36)

816 (1800)

1702 (67)

3378 (133)

914 (36)

907 (2000)

1981 (78)

4064 (160)

1168 (46)

907 (2000)

1981 (78)

4064 (160)

1168 (46)

1000 (2200)

1981 (78)

5030 (198)

1168 (46)

1800 (4100)

Model

E4H-CE-3 L

E4H-CE-5 L

E4H-CE-7 L

E8-CE-9 L

E8-CE-14 L

E8-CE-23 L

RO Pump Model

SS2823G-50

SS5512D-50

SS8512D-50

SS8512D-50

SS12509KZC-50

SS24007KZC-50

RO Motor: KW (HP)

3.7 (5)

7.4 (10)

11.2 (15)

11.2 (15)

15 (20)

22.4 (30)

Model

E4H-CE-3 L CW

E4H-CE-5 L CW

E4H-CE-7 L CW

E8-CE-9 L CW

E8-CE-14 L CW

E8-CE-23 L CW

RO Pump Model

SS2834D-50

SS5516KZB-50

SS5518KZB-50

SS8520KZC-50

SS12512KZC-50

SS24009KZC-50

RO Motor: KW (HP)

5.6 (7.5)

11.2 (15)

11.2 (15)

15 (20)

18.6 (25)

29.8 (40)

Table 2: Materials of Construction

Table 4: E-Series-CE-L Specifications 50 Hz

Table 3: Pump and Motor

Table 5: E-Series-CE-L Pump and motor specifications

Optional Features (Consult price list for more information)

 Clean In Place (CIP) System

Page 2 Fact Sheet