GE P&W DC9112A User Manual
DusTreat* DC9112A
Dust Control Binding Agent
Fact Sheet
• Provides excellent control of fugitive emissions
• Effective on coal, ores and other bulk solid
materials
• Controls dust in active storage piles and roads
• Reduces inventory losses
Description and Use
DusTreat* DC9112A is a binder specifically formulated to control fugitive dust from storage piles and
haul roads. This product is biodegradable and does
not contain corrosive chloride compounds or waste
oils. DusTreat DC9112A solutions are effective in
reducing respirable dust.
Fugitive dust is typically generated during unloading, stackout, reclaim and crushing operations.
These dust emissions can be a safety hazard, an
environmental nuisance, and can increase maintenance of material handling equipment. In addition,
these emissions can represent a substantial loss of
valuable fuel.
Fugitive emissions can be significantly reduced by
applying DusTreat DC9112A as a water solution to
water spray systems at a material transfer point or
from tank trucks equipped with sprays. DusTreat
DC9112A solutions provide residual control so that
treatment needs only to be applied at a minimal
number of locations. This reduces the cost of heating value losses associated with moisture addition
to coal.
Treatment and Feeding Requirements
Proper treatment levels for DusTreat DC9112A depend on many factors, such as severity of the problem, environmental influences and operating
characteristics of the system. Therefore, this product should be used in accordance with the control
parameters that GE Water & Process Technologies
establishes for the application.
Maximum efficiency with minimum cost is ensured
by using GE wet suppression systems. These systems are fully automated and custom sized per site
specifications to provide reliable and economical
chemical treatment. While optimal results are obtained with GE equipment, DusTreat DC9112A can
be used in other feed systems. Check with your GE
representative for material compatibility information.
For contact with neat product, recommended materials of construction include stainless steel and
PVC. For dilute aqueous solutions, use of galvanized
iron or brass yields acceptable results.
Packaging Information
DusTreat DC9112A is a liquid blend available in a
wide variety of customized containers and delivery
methods. Contact your GE representative for details.
DusTreat DC9112A should be stored at temperatures above freezing. To ensure maximum activity,
use this product within six months.
Safety Precautions
A Material Safety Data Sheet containing detailed
information about this product is available upon
request.
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2009, General Electric Company. All rights reserved.
AP-FSipDusTreatDC9112A_EN.doc Mar-09
Loading...