Page 1
PTD9000BN/SN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
9-1/2" MAX.
F
Conduit
48"
47" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
PTD9000BNTS, PTD9000FNDS, PTD9000SNSS
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
PTD9000BNTS, PTD9000FNDS, PTD9000SNSS
GE Profile™ 30" Built-In Convection Double Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Wall coverings, countertops and
cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).
NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
ATTENTION I N S TA L LE R : Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.
KW R ATI N G
240V 9.0
208V 6.8
BREAKER SIZE
240V 40 Amps
208V 40 Amps
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
B
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
C
30''
PTD9000
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
23" minimum
door opening
allowance
Suitable
bracing
to support
runners
F
(must support 400 lbs.)
C
9-1/2" MAX.
Cutout depth
23-1/2" MIN
Junction box
location
Conduit
48"
47" to
bottom of
junction box
E
22"
D
2 x 4 or
L
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Dimension and
installation information
are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 8/19
Page 2
PTD9000BN/SN
GE Profile™ 30" Built-In Convection Double Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: 30" Double electric wall ovens are
approved for installation above 27" and 30"
warming drawers.
ATTENTION I N S TA L LE R : Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with ALL
products for current dimensional and combination
data.
WHEN TO USE THE PEDESTAL RAILS:
When replacing an older GE Appliances 30"
double wall oven with a new GE Appliances model.
Cutout Height = 51-13/16" to 51-15/16". This is our
traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from
another manufacturer (ie; Whirlpool) with a new
GE Appliances model. Cutout height = 50-1/4".
You will need to verify that the existing cutout
matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven
is being installed into new construction (ie; not a
replacement), then the recommended installation
is to use the pedestal rails.
Attachment
screws
Flanges toward
center of cutout
Top cutout
toward front
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Specification Created 8/19
Page 3
PTD9000BN/SN
GE Profile™ 30" Built-In Convection Double Wall Oven
FEATURES AND BENEFITS
In-oven camera – Check the progress of your food without opening the oven door, by
simply syncing your oven with your smartphone and streaming live photos
Precision cooking modes – Skip the oven hover, even when cooking the most intricate
dishes, thanks to advanced technology that provides step-by-step instructions and
automatic adjustments to oven temperatures and cook times for perfect results
Brilliant touch 7" display – A bright, interactive touch screen makes it fun and easy to
program the oven
True European Convection with Direct Air – Optimize your results on roasts, chicken,
turkey and other special-occasion favorites, with the only cooking system that delivers
true top-down convection
No preheat options – Save time with a variety of precision cooking modes that eliminate
the need for preheating
Hot air frying – Achieve crispy, never greasy, fried food results in your oven without the oil
Anywhere control with remote notifications – Save time by conveniently preheating and
monitoring your oven from anywhere using the GE Appliances Kitchen app
Soft-close door – Rest assured your oven door will always close softly, thanks to a special
hinge that quietly eases it shut
Never-scrub, heavy-duty smooth glide racks – Easily remove even the heaviest dishes
with two roller racks in each cavity that glide seamlessly out of the oven
Self-clean oven with optional steam clean – Let your oven do the cleaning for you with
two ways to eliminate baked on messes
Model PTD9000BNTS – Black Stainless
Model PTD9000SNSS – Stainless Steel
GUARANTEED FIT
Replacing a similar wall oven from
GE Appliances or another brand? GE
wall ovens are guaranteed for an exact
fit or GE Appliances will pay up to $300
toward modifications.
Visit geappliances.com for more info
Specification Created 8/19
Loading...