Page 1
PTD7000BN/FN/SN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
9-1/2" MAX.
F
Conduit
48"
47" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
GE Profile
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Wall coverings, countertops and
cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).
NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
ATTENTI O N I N S TALLER: Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.
KW R ATI N G
24 0V 8.4
208V 6.3
BREAKER SIZE
24 0V 40 Amps
208V 40 Amps
™
Series 30" Built-In Double Electric Convection Wall Oven
23" minimum
door opening
allowance
C
L
Suitable
bracing
to support
runners
For answers to your GE Profile™ Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
(must support 400 lbs.)
F
Conduit
E
22"
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Cutout width
9-1/2" MAX.
Cutout depth
23-1/2" MIN
Junction box
location
B
48"
47" to
bottom of
junction box
D
28-1/2" MIN.
28-5/8" MAX.
30''
Dimension and installation information are shown in inches.
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
A
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
C
Recommended
minimum
cutout location
from the floor
12"
PTD7000
Listed by
Underwriters
Laboratories
Specification Revised 1/19
Page 2
PTD7000BN/FN/SN
GE Profile
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: 30" Double electric wall ovens are
approved for installation above 27" and 30"
warming drawers.
ATTENTI O N I N S TALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with ALL
products for current dimensional and combination
data.
WHEN TO USE THE PEDESTAL RAILS:
When replacing an older GE Appliances 30"
double wall oven with a new GE Appliances model.
Cutout Height = 51-13/16" to 51-15/16". This is our
traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from
another manufacturer (ie; Whirlpool) with a new
GE Appliances model. Cutout height = 50-1/4".
You will need to verify that the existing cutout
matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven
is being installed into new construction (ie; not a
replacement), then the recommended installation
is to use the pedestal rails.
™
Series 30" Built-In Double Electric Convection Wall Oven
Attachment
screws
Flanges toward
center of cutout
Top cutout
toward front
For answers to your GE Profile™ Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Specification Revised 1/19
Page 3
PTD7000BN/FN/SN
GE Profile
FEATURES AND BENEFITS
Precision cooking modes – Set your oven to autopilot, even when cooking
the most intricate dishes, with advanced technology that provides simple
instructions then automatically adjusts temperature and cook times to deliver
perfect results
Brilliant Touch 7" Display – A bright, interactive touch screen makes it fun
and easy to program the oven
True European Convection with Direct Air – Optimize your results on roasts,
chicken, turkey and other special-occasion favorites, with the only cooking
system that delivers true top-down convection
No preheat option – Save time with a variety of precision cooking modes that
eliminate the need for preheating
Hot air frying – Achieve crispy, never greasy, fried food results in your oven
without the oil
Dehydrate – Create delicious snacks in your oven like dried fruits, jerky and
veggie chips without the need for extra kitchen gadgets
Anywhere control with remote notifications – Save time by conveniently
preheating and monitoring your oven from anywhere using the GE Appliances
Kitchen app
™
Series 30" Built-In Double Electric Convection Wall Oven
Never scrub, heavy-duty smooth glide racks – Easily remove even the heaviest
dishes with a roller rack that’s engineered to glide seamlessly out of the oven
Scan-to-cook technology – Prepare your favorite packaged foods to perfection
simply by scanning the barcode on the package with your smartphone and
letting your oven adjust settings automatically
Model PTD7000FNDS – Black Slate
Model PTD7000BNTS – Black Stainless
Model PTD7000SNSS – Stainless Steel
FIT GUARANTEE
Replacing a similar wall oven from GE Appliances or another brand? GE wall
ovens are guaranteed for an exact fit or GE Appliances will pay up to $300
toward modifications.
Visit geappliances.com for more info
Specification Revised 1/19
Loading...