GE Profile PP7036SJSS Specifications

PP9036SJ, PP7036SJ, JP5036SJ

pp7036sJ

GE Profile

DImensIons anD InstallatIon InformatIon (In Inches)

™

Series 36" Built-In Knob Control Electric Cooktop

Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.

note: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed to
install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.

Before installing, consult installation
instructions packed with product for
current dimensional data.

approxImate cookIng DImensIons

20-1/2"

33-3/4"

3-1/4" at front of unit and
6" at conduit location

18-7/8"

1-3/4" MIN.
to rear wall

2-1/2" MIN.

Required

To insure accuracy, it is best to make a
template when cutting the opening in the counter

KW Rating

240V 9.6

208V 8.3

Amperage

240V 40 Amps

208V 40 Amps

†

†

36-1/8"

Cooktop

33-7/8"

to 34"

†

note: Check local codes

for required breaker size

19-1/8" to

19-1/4"

13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)

30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)

See label next

to nameplate for

MIN. clearance

to wall

Electrical junction box 16" MIN.

below countertop

2" MIN. clearance
to side wall from cut-out
on both sides of cooktop

15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop

For answers to your Monogram,® GE Profile™
or GE® appliance questions, visit our website
at geappliances.com or call GE Answer Center®
service, 800.626.2000.

Listed by
Underwriters
Laboratories

Specification Created 1/15

pp7036sJ

GE Profile

features anD BenefIts

Five radiant cooking elements - Cook foods quickly and evenly
on this sleek, glass surface

6"/9"/12" tri-ring element - Use different pan sizes on this single, 3,000-watt
flexible element

5"/8" Power Boil element - Use different pan sizes on this single, 2,400-watt
flexible element that produces rapid powerful heat

SyncBurners - Control two 7" elements simultaneously to evenly heat large
cookware or griddles*

Keep Warm setting - Keep food warm with GE’s lowest heat setting or boil
water in minutes with this fully functional 6" element

Melt setting - Gently melt delicate foods without burning
or scorching

Control lock capability - Protects against unintended activation

Red LED backlit knobs with black glass surface and stainless
steel trim - Achieve a modern look with the convenience of knob controls
that complements the entire kitchen and other stainless steel appliances

™

Series 36" Built-In Knob Control Electric Cooktop

* optIonal staInless steel claD

alumInum grIDDle

Achieve even results with this lightweight
griddle, tailored to fit GE SyncBurners. Order
part number JXGRIDL1 from your GE Dealer.

Hot surface indicator lights - Know when elements are too hot
to touch with a quick glance

Cooktop “On” indicator light - A light lets you know when
an element is active

Model PP7036SJSS - Stainless steel

Specification Created 1/15