GE Profile PHP9030BMTS Specifications

PHP9030SJ/BM

PHP9030SJ

INSTALLATION ABOVE A WALL OVEN

GE Profile

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 3" free area between

the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48" flexible
armored cable.

NOTE: 30" induction cooktops are approved
for use over select GE 27" and GE 30" Single
Wall Ovens and Warming Drawers. Refer
to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data. If installed with a GE
Telescopic Downdraft System, consult both the
cooktop and downdraft installation instructions
packed with product before installing. Cooktop
gas/electric supply may need to be re-routed to
install downdraft. The countertop cutout requires
23-1/2" minimum flat countertop surface and 25"
minimum total countertop depth. In addition,
other clearances to front edge of the countertop
must be considered. Before installing, consult
installation instructions packed with product for
current dimensional data.

CUTOUT FILLER TRIM KIT: A filler trim kit
is available for use if your countertop cutout
is larger than the dimension shown, up to
29-13/16" x 20-7/16". Order JXTR32B for black or
JXTR32W for white, to reduce the cutout opening
for installation of this cooktop. These kits may be
ordered from your GE Appliances Dealer.

™

Series 30" Built-In Touch-Control Induction Cooktop

APPROXIMATE COOKING DIMENSIONS

4-5/8" at baffle near center
ofunit (except when installed
above an approved wall
oven) and 3-1/4" at rear
of air intake

1-3/4" MIN.
to rear wall

To insure accuracy, it is best to make a
template when cutting the opening in the counter

INSTALLATION ABOVE A WALL OVEN

From front edge

of countertop to front

edge of cooktop cutout

31-1/4" MIN

From top surface

of countertop to

top surface of

wall oven support

platform

2-1/2" MIN.

Required

2-1/2" MIN

29-7/8"

19-1/4"

Cooktop

28-1/2" to

28-5/8"

28"

21"

19-5/8"

to 19-3/4"

13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)

30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)

Electrical junction box 16" MIN.

below countertop

2" MIN. clearance
to side wall from cut-out
on both sides of cooktop

KW RATING

240V 7.4

208V 6.4

AMPERAGE

240V 40 Amps

208V 40 Amps

15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop

†

NOTE: Check local

†

codes for required

†

breaker size.

For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.

ADA

COMPLIANT

Listed by
Underwriters
Laboratories

Specification Revised 1/19

PHP9030SJ/BM

GE Profile

FEATURES AND BENEFITS
Four Induction elements – Enjoy a new level of rapid, precise heating
with a cool-to-the-touch surface that’s easy to clean

Digital touch controls – Accurately control your heating and enjoy an
easy to clean surface

11" 3,700-watt induction element – Rapidly boil water with
GE Appliances' most powerfull induction element

SyncBurners – Control two 7" elements simultaneously to evenly heat
large cookware or griddles*

Kitchen timer – Helps coordinate meal preparation and cooking

Control lock capability – Protects against unintended activation

Pan presence & size sensor – Cook efficiently with elements that heat to
the size of your pan and shut off when no pan is present

Red LED display with black glass surface and stainless steel trim –
Achieve a modern look that complements the entire kitchen and other
stainless steel appliances

Hot surface indicator lights – Know when elements are too
hot to touch with a quick glance

Model PHP9030SJSS – Stainless Steel

™

Series 30" Built-In Touch-Control Induction Cooktop

* OPTIONAL STAINLESS STEEL CLAD

ALUMINUM GRIDDLE

Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.

Model PHP9030BMTS – Black stainless

GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications

Visit geappliances.com for more info

Specification Revised 1/19