Page 1
PTD700RSN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
9-1/2" MAX.
F
Conduit
48"
47" to
bottom of
junction box
Cutout depth
23-1/2" MIN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
E
D
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Junction box
may be located in
adjacent cabinet
Door Swing Depth
31-1/8" (77.8 cm) MIN.
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Right-Hand Side-Swing Doors
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Wall coverings, countertops and cabinets
surrounding the wall oven must be able to
withstand a temperature of up to 200°F (94°C).
NOTE: If the cabinet in which the wall oven is
installed does not have a solid bottom, two braces
or runners must be installed to support the weight
of the oven. The runners and braces must support
up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the
handle.
ATTE N T I ON IN S TA LLER : Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product for
current dimensional data.
KW RATING
24 0V 9.0
208V 6.8
BREAKER SIZE
24 0V 40 Amps
208V 40 Amps
For answers to your GE Profile™ or GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
F
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Conduit
48"
E
Dimension and installation information are shown in inches.
D
Door Swing Depth
31-1/8" (77.8 cm) MIN.
9-1/2" MAX.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Cutout depth
23-1/2" MIN
Junction box
may be located in
adjacent cabinet
47" to
bottom of
junction box
B
30''
A
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
C
Recommended
minimum
cutout location
from the floor
12"
PTD7000
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
Listed by
Underwriters
Laboratories
Specif ication Rev ised 1/22
Page 2
PTD700RSN
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Right-Hand Side-Swing Doors
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: 30" Double electric wall ovens are approved for
installation above 27" and 30" warming drawers.
IMPORTANT: Before installing, consult installation
instructions packed with ALL products for current
dimensional and combination data.
WHEN TO USE THE PEDESTAL RAILS: When
replacing an older GE Appliances 30" double wall oven with
a new GE Appliances model. Cutout Height = 51-13/16" to
51-15/16". This is our traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from another
manufacturer (ie; Whirlpool) with a new GE Appliances
model. Cutout height = 50-1/4". You will need to verify that
the existing cutout matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven is being
installed into new construction (ie; not a replacement), then
the recommended installation is to use the pedestal rails.
Attachment
screws
Flanges toward
center of cutout
Top cutout
toward front
For answers to your GE Profile™ or GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Specif ication Rev ised 1/22
Page 3
PTD700RSN
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Right-Hand Side-Swing Doors
FEATURES AND BENEFITS
Swing Door – An innovative door design that opens to the side instead of down, eliminating
awkward reaching.
Precision Cooking Modes* – Simplify the cooking process with precision cooking modes that
automatically track progress, and make time and temperature adjustments (upper oven).
No Preheat Air Fry – Integrated hot air frying technology gives you crispy results in your oven without
using oil (upper oven).
No Preheat – Eliminate the need for preheating and save time with a variety of precision
cooking modes.
Built-In WiFi, Powered by SmartHQ App – Connect, control and manage your oven from anywhere with
your smartphone or tablet.
GE Profile Connect + – Ensure your oven always has the latest features, like new Air Fry modes, with
downloadable software updates.
Full-Color Display – Easily navigate wall oven settings thanks to a 7" touchscreen display.
True European Convection with Direct Air – This oven features True European Convection, an advanced
convection system that uses a third heating element and reversing fan for the highest
level of heat and air circulation.
Easy-Glide, Never-Scrub Rack – This smooth-gliding oven rack can be left in the oven during the selfclean cycle so you never have to scrub.
Temperature Probe – A precision temperature probe connects to the oven to ensure your food
is properly cooked.
Self-Clean with Steam Clean – This self-cleaning oven uses optional steam cleaning for light
soils to clean the oven cavity with less heat and odor.
Fit Guarantee – This oven will fit your existing cut-out, or GE Appliances will help pay for modifications
up to $300.
Visit geappliances.com for more info.
Model PTD700RSNSS – Stainless Steel
*Available once connected to WiFi.
Specif ication Rev ised 1/22
Loading...