Page 1
PTD7000BN/FN/SN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
9-1/2" MAX.
F
Conduit
48"
47" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
22"
23" minimum
door opening
allowance
E
D
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
JTD3000DNBB, JTD3000DNWW, JTD3000ENES,
JTD3000SNSS, JTD5000BNTS, JTD5000DNBB,
JTD5000DNWW, JTD5000ENES, JTD5000FNDS,
JTD5000SNSS, PTD7000BNTS, PTD7000FNDS,
PTD7000SNSS, PTD700LSNSS, PTD700RSNSS
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Air Fry and Precision Cooking
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Wall coverings, countertops and cabinets
surrounding the wall oven must be able to withstand
a temperature of up to 200°F (94°C).
NOTE: If the cabinet in which the wall oven is
installed does not have a solid bottom, two braces or
runners must be installed to support the weight of
the oven. The runners and braces must support up
to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the
handle.
ATTENTI O N I N S TALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult installation
23" minimum
door opening
allowance
instructions packed with product for current
dimensional data.
KW R ATI N G
24 0V 8.7
208V 6.5
BREAKER SIZE
24 0V 40 Amps
208V 40 Amps
Suitable
bracing
to support
runners
For answers to your GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
(must support 400 lbs.)
C
L
F
22"
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
30''
Conduit
E
48"
D
9-1/2" MAX.
Cutout depth
23-1/2" MIN
Junction box
location
B
47" to
bottom of
junction box
Dimension and installation information are shown in inches.
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
PTD7000
Listed by
Underwriters
Laboratories
Specif ication Revised 1/22
Page 2
PTD7000BN/FN/SN
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Air Fry and Precision Cooking
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: 30" Double electric wall ovens are approved
for installation above 27" and 30" warming drawers.
ATTENTI O N I N S TALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult installation
instructions packed with ALL products for current
dimensional and combination data.
WHEN TO USE THE PEDESTAL RAILS: When
replacing an older GE Appliances 30" double wall
oven with a new GE Appliances model. Cutout
Height = 51-13/16" to 51-15/16". This is our
traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from another
manufacturer (ie; Whirlpool) with a new
GE Appliances model. Cutout height = 50-1/4". You
will need to verify that the existing cutout matches
the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven
is being installed into new construction (ie; not a
replacement), then the recommended installation
is to use the pedestal rails.
Attachment
screws
Flanges toward
center of cutout
Top cutout
toward front
For answers to your GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Specif ication Revised 1/22
Page 3
PTD7000BN/FN/SN
GE Profile™ 30" Smart Built-In Convection Double Wall Oven
with Air Fry and Precision Cooking
FEATURES AND BENEFITS
No Preheat Air Fry – Integrated hot air frying technology gives you crispy results in your oven
without using oil (upper oven).
Precision Cooking Modes* – Simplify the cooking process with precision cooking modes that
automatically track progress, and make time and temperature adjustments (upper oven).
Built-In WiFi, Powered by SmartHQ App - Connect, control and manage your oven from anywhere
with your smartphone or tablet
GE Profile Connect + – Ensure your oven always has the latest features, like new Air Fry modes, with
downloadable software updates
Temperature Probe – A precision temperature probe connects to the oven to ensure your food is
properly cooked.
True European Convection with Direct Air – This oven features True European Convection, an
advanced convection system that uses a third heating element and reversing fan for the highest level
of heat and air circulation.
Full-Color Display – Easily navigate wall oven settings thanks to a 7" touchscreen display.
No Preheat – Eliminate the need for preheating and save time with a variety of precision
cooking modes.
Easy-Glide, Never-Scrub Rack – This smooth-gliding oven rack can be left in the oven during the
self-clean cycle so you never have to scrub.
Self-Clean with Steam Clean – This self-cleaning oven uses optional steam cleaning for light soils to
clean the oven cavity with less heat and odor.
10-pass hidden bake element – Even baking is assured with heat that covers more surface area
10-pass dual-broil element – Large and small dishes brown evenly with two, full-coverage elements
Double oven convection – Cook more dishes at once and achieve perfectly even results with
convection technology in both ovens
Fit Guarantee – This oven will fit your existing cut-out, or GE Appliances will help pay for
modifications up to $300.
Model PTD7000FNDS – Black Slate
Model PTD7000BNTS – Black Stainless
Model PTD7000SNSS – Stainless Steel
*Available once connected to WiFi.
FIT GUARANTEE
Replacing a similar wall oven from GE Appliances
or another brand? GE wall ovens are guaranteed
for an exact fit or GE Appliances will pay up to
$300 toward modifications.
Visit geappliances.com for more info
Specif ication Revised 1/22
Loading...