PP9036SJ
PP9036SJ, PP7036SJ, JP5036SJ
INSTALLATION ABOVE A WALL OVEN
GE Profile
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.
NOTE: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed to
install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.
Before installing, consult installation
instructions packed with product for
current dimensional data.
™
Series 36" Built-In Touch Control Cooktop
APPROXIMATE COOKING DIMENSIONS
3-1/4" at front of unit and
5-9/16" at conduit location
1-3/4" MIN.
to rear wall
2-1/2" MIN.
To insure accuracy, it is best to make a
template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
18-7/8"
Required
36-1/8"
Cooktop
33-7/8"
to 34"
20-1/2"
33-3/4"
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
19-1/8" to
19-1/4"
Electrical junction box 16" MIN.
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
See label next
to nameplate for
MIN. clearance
to wall
below countertop
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
VOLTAGE (60HZ AC) 240V
CONNECTED LOAD (MAX.) 9.6 kW
CURRENT DRAW (MAX.) 40.0 Amps 34.7 A mps
RECOMMENDED CIRCUIT BREAKER†40 Amps 40 Amps
†
NOTE: Check local codes for required breaker size.
208V
7.2 kW
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by
Underwriters
Laboratories
Specification Revised 1/19
PP9036SJ
GE Profile
FEATURES AND BENEFITS
Five radiant cooking elements – Cook foods quickly and evenly on this
sleek, glass surface
Glide touch controls – Precisely control heat instantly and easily with
one swipe
6"/9"/12" tri-ring element – Use different pan sizes on this single, 3,000-watt
flexible element
5"/8" Power Boil element – Use different pan sizes on this single, 2,400-watt
flexible element that produces rapid powerful heat
SyncBurners – Control two 7" elements simultaneously to evenly heat large
cookware or griddles*
Multi-element timer – Manage up to five pans at once with individual timers
for each element
™
Series 36" Built-In Touch Control Cooktop
Control lock capability – Protects against unintended activation
Custom Settings – Personalize your cooktop settings to fit your cooking style
Red LED display with black glass surface and stainless steel trim – Achieve
a modern look that complements the entire kitchen and other stainless steel
appliances
Hot surface indicator lights – Know when elements are too hot
to touch with a quick glance
Model PP9036SJSS – Stainless steel
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications
Visit geappliances.com for more info
* OPTIONAL STAINLESS STEEL CLAD
ALUMINUM GRIDDLE
Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer
Specification Revised 1/19
Loading...