GeoVision AView V1.3.1 User Manual

GV-AView for Android Smartphones & Tablets

You can now access GV-System using Android version 2.2 to 4.1.2 to watch live view or play

back recorded videos. Download GV-AView from Android Market, and after installing the

application, the GV-AView icon will appear on the desktop.

System Requirements and Specifications

Mobile Application

OS Supported

System Supported

Port

Protocol

Codec

Resolution Supported

Functions

GV-AView V1.3.1

Android version 2.2 to 4.1.2.

GV-System 8.4.0.0 to 8.5.7.0

Data Port: 8866, HTTP Port: 80, RPB Port: 5511

TCP/IP

MJPEG

QCIF (176 x 144), CIF (320 x 240), VGA (640 x 480)

 Live View from GV-System

 Remote Playback (RPB)

 I/O Trigger

 PTZ control

 Multiple Camera Views

 Snapshots

Note:

1. VGA resolution is only supported when accessing the live view of GV-System

V8.5.7.0 or later.

2. PTZ control is only supported in GV-PT110D, GV-PTZ010D, GV-IP Speed Dome

and COP 15-CD53W (Pelco D).

3. Starting from GV-AView V1.2.0, GV-AView no longer supports access to live view on

GV-IP Devices.

1

Allowing Remote Access to GV-System:

To access the GV-System from GV-AView, you need to first activate the JPG settings and the

mobile function on the GV-System.

1. In the main system, click the Network button and select Webcam Server.

2. In the dialog box that appears, click the JPG tab and select Create JPEG/GIF file(s).

3. Click the Mobile tab and select the checkbox to enable the mobile function.

4. Click OK to save the settings.

Note: If there is a router or firewall installed, ensure these communication ports required by

the WebCam server are open: HTTP Port 80, HTTPS Port 443 (if SSL is enabled), Live View

Port 8866 and RPB Port 5511.

2

Connecting to GV-System

1. On your mobile phone, tap the GV-AView icon on the main screen and tap the
NVR/DVR View tab. This page appears.

2. Type the IP address, port numbe assword of the GV-System you want r, user name and p

to access. And then tap the Add button
address book.

3. Select ON for HTTPS, if SSL is enabled for the WebCam Server. If the default SSL, port of

443, on the WebCam Server is modified, type the new port number at the end of the IP

address and use a colon to separate the port number from the IP address for HTTPS

connections, e.g., webcam.geovision.com.tw:445.

Note: If the default HTTP port of 80 on the WebCam Server of the GV-System is modified,

specify the new port number used for HTTP connection at the end of the IP address, e.g.,

webcam.geovision.com.tw:81.

to save the connection information in the

3