Georg Fischer EA15 Operating Manual
GF Piping Systems
Small & Light
Electric Actuators
Type EA15-250
Fully packed
Shaft for integrated
emergency manual override
Accessories slot
LED light tube
Motor
Display for
error code
Protected wide range
power supply
Digital position
detection
Integrated heater
with dial
Teach buttons for
adjustment
Terminals
Connections for
further plugs
2
Smart Functions for Easy
Operation
The new series of electric actuators from GF Piping Systems provides the highest reliability
and ease of use. With smart additional functions, these actuators are ahead of their time.
Features & Benefi ts
Clear display
In addition to the standard display, there is colour LED feedback. This enables easy and fast detection of the operating
status at a glance – whether in low light conditions or from a
distance. The di erent colours show the respective position
of the actuator. The integrated relays allow feedback from up
to three di erent actuating positions.
Easy set-up
Digital 360° position detection is used to clearly identify the
actuating position. Ex factory, the actuator is adjusted to 0°
and 90°. Readjustment by the user is possible at any time on
site via four buttons. The buttons are easy to operate without
any additional tools.
Intelligent feedback
The 7-segment error display ensures the highest level of
security in case of a problem. Through various error codes,
the cause of a problem can be clearly identifi ed. A time and
labour-intensive search is no longer necessary. Whether it’s
undervoltage, a position error or use of the emergency
manual override – the display facilitates the identifi cation of
disruptions. The ‘ready-to-operate’ signal gives feedback on
the process control system. The signal will drop in case of
failure.
3
Loading...