Georg Fischer 9900 Specifications

Signet 9900 Transmitter

T

Member of the SmartPro® Family of Instruments

Panel Mount Field Mount

The Signet 9900 Transmitter provides a single channel
interface for many di erent parameters including Flow,
pH/ORP, Conductivity/Resistivity, Salinity, Pressure,
Temperature, Level, Dissolved Oxygen, and other sensors
that output a 4 to 20 mA signal. The 9900-1P Transmitter
can also be used as a Batch Controller when a Batch
Module and Relay Module are installed.

The 9900 is o ered in both panel or fi eld mount versions.
Both confi gurations o er an extra large (3.90” x 3.90”)
auto-sensing backlit display features “at-a-glance”
visibility that can be viewed at 4-5 times the distance
over traditional transmitters. The highly illuminated
display and large characters reduce the risk of misreading
or misinterpreting the displayed values. The display
shows separate lines for units, main and secondary
measurements as well as a “dial-type” digital bar graph.

Features

• NEW! Modbus Module supports RS485 Serial
Modbus Communications

• Multiple sensor types supported with one
instrument

• “Dial-type” digital bar graph

• Modules are fi eld installable and replaceable
anytime

• Optional Relay Module for addition of two dry
contact relays

• Optional H COMM Module for two-way
communication

• Optional Batch Module for Batch Control

• Modbus Module for connection to Serial, RS485,
Modbus networks

• One 4 to 20 mA output in base unit. One additional

4 to 20 mA available with optional module

• Rear Enclosure kits for panel, wall or pipe
mounting

• Warning and Relay LED indicators for
“at a glance” visibility

• Customizable features including digital label for
custom identifi cation

• Optional PC COMM confi guration tool for
confi guration at a PC

The 9900 can run on 12 to 32 VDC power (24 VDC nominal),
and can also be loop powered with compatible sensors.

Rear Enclosure kits are available for the 9900-1P Panel
Mount. Kit options include either a Hinged Cover
(3-9900.399-1) for wall or pipe mount installations, or a
Flat Cover (3-9900.399-2) designed to fi t inside a panel for
waterproof protection.

The 9900 o ers complete fl exibility, plug-in modules allow
the unit to easily adapt to meet changing customer needs.
Optional modules include the new Modbus as well as the
Relay, Direct Conductivity/Resistivity, H COMM, Batch,
4 to 20 mA Output, and a PC COMM Confi guration Tool.
The unit can be used with default values for quick and
easy programming or can be customized with labeling,
adjustable minimum and maximum dial settings, and unit
of measure and decimal location choices.

MEASURING EQUIPMEN

77CJ

Applications

• Wastewater Treatment

• Reverse Osmosis

• Deionization

– Ultra Pure Water
– Two Bed System
– Mixed Bed System

• Chemical Manufacturing/Addition

• Metal and Plastic Finishing

• Fume Scrubber

• Cooling Towers

• Media Filtration

Specifi cations

General

Input Channels One

3

Input Types Digital (S

Frequency Range 0.5 to 1500 Hz

Measurement Types Flow, pH/ORP, Conductivity/Resis tivity, Salinity, Pressure, Temperature, Level, Dissolved Oxygen,

Enclosure and Display

Case Material PBT

Window Shatter-resistant glass

Keypad 4 buttons, injection-molded silicone rubber seal

Display Backlit, 7 and 14-segment

Update Rate 1 s

LCD Contrast 5 settings

Indicators “Dial-type” digital bar graph. LEDs for Open Collector, Relays and Warning Indicator

Enclosure Size ¼ DIN

Mounting 9900-1P

Panel ¼ DIN, ribbed on four sides for panel mounting clip inside panel, silicon gasket included. Optional

Wall Options include 9900-1P installed in pre-wired NEMA enclosure or inside of rear enclosure with

Pipe Optional Rear Enclosure with hinged cover and 9900-1P for pipe mount installation

Mounting 9900-1

Field (Integral) Options include yellow universal or integral kits for installation with sensor

Display Ranges

pH 0.00 to 15.00 pH

pH Temperature -39.99 °C to 149.99 °C -40 °F to 302 °F

ORP -1999 to +1999 mV

Flow Rate -9999 to 99999 units per second, minute, hour or day

Totalizer 0.00 to 99999999 units

Conductivity 0.0000 to 99999 µS, mS, PPM and PPB (TDS), kΩ, MΩ

Conductivity Temperature -100 °C to 250 °C –148 °F to 350 °F (application and sensor dependent)

Temperature -99 °C to 350 °C –99 °F to 350 °F

Pressure -40 to 1000 psi

Level -9999 to 99999 m, cm, ft, in, %

Volume 0 to 99999 cm

Salinity 0 to 99.97 PPT

Dissolved Oxygen PPM 0-50, % SAT 0-200, 0 to 999.9 TORR

Dissolved Oxygen
Temperature

Environmental

Ambient Operating Temperature

Backlit LCD -10 °C to 70 °C 14 °F to 158 °F

Storage Temperature -15 °C to 70 °C 5 °F to 158 °F

Relative Humidity 0 to 100% condensing for fi eld mount; 0 to 95% non-condensing for panel mount

Maximum Altitude 4,000 m (13,123 ft)

Enclosure Rating NEMA 4X/IP65 (front face only on panel mount); fi eld mount is 100% NEMA 4X/IP65

L) Serial ASCII, TTL level, 9600 bps

Accuracy 0.5% of reading

Batch or user-defi ned (via 8058)

rear enclosure with fl at cover available for waterproof protection when installed inside a panel.

hinged cover.

3

, m3, in3, ft3, gal, L, lb, kg, %

-99 °C to 350 °C –99 °F to 350 °F

www.gfsignet.com

Specifi cations (continued)

Electrical Requirements

Power to Sensors

Voltage +4.9 to 5.5 VDC @ 25 °C, regulated

Current 1.5 mA max in loop power mode (up to 2.0 mA with 24 V @ 300 Ω max. loop impedance);

20 mA max when using DC power

Short Circuit Protected

Isolation Low voltage (< 48V AC/DC) to loop with DC power connected

No isolation when using loop power only

Terminal Blocks Pluggable screw type 14 AWG max wire gauge

Input Power

DC 10.8 to 35.2 VDC, regulated

9900 without Relay Module 200 mA @ 10.8 VDC to 35.2 VDC

9900 with Relay Module 300 mA @ 10.8 VDC to 35.2 VDC

Overvoltage Protection 48 Volt Transient Protection Device

Current limiting for circuit protection

Reverse-Voltage Protection

Loop Power

No DC Power Input

Max. Loop Impedance 50 Ω @ 12 V 325 Ω @ 18 V 600 Ω @ 24 V

With DC Power Input or with 2nd loop, all the time

Max. Loop Impedance 250 Ω @ 12 V 500 Ω @ 18 V 750 Ω @ 24 V

Relay Specifi cations

Dry-Contact Relays (2) Open Collector (1)

Type SPDT N/A

Form C N/A

Max. Current Rating 5 A resistive 50 mA DC

Max. Voltage Rating 30 VDC or 250 VAC 30 VDC

Hysteresis Adjustable (absolute in engineering units) (EUs)

Latch Reset in test screen only

Delay 9999.9 seconds (max.)

Test Mode Set On or O

Cycle Time 99999 seconds (max.)

Maximum Pulse Rate 300 pulses/minute

Proportional Pulse 400 pulses/minute

Volumetric Pulse Width 0.1 to 3200 s

Pulse Width Modulation 0.1 to 320 s

Input Types

Digital (S

4 to 20 mA input via the 8058-1

pH/ORP input via the Digital (S3L) output from the 2750/2751 pH/ORP Sensor Electronics

Raw Conductivity/Resistivity input directly from Signet Conductivity/Resistivity electrodes via Direct Conductivity/
Resistivity Module or via 2850

Input Specifi cations

Digital (S

Frequency Input

3

L) or AC frequency

3

L) Serial ACSII, TTL level, 9600 bps

Sensitivity 80 mV @ 5 Hz, gradually increasing with frequency

Span 0.5 Hz to 1500 Hz @ TTL level input

Accuracy ± 0.5% or reading max error @ 25 °C

Resolution 1 µS

Repeatability ± 0.2% of reading

www.gfsignet.com