Georg Fischer 8250 Data Sheet

Page 1
8250 ProcessPro® Level Transmitters
Panel Mount
Available with Single or Dual Sensor Input
Description
+GF+
SIGNET 8250 Level Transmitters are compatible with the +GF+ SIGNET 2450 Pressure Sensor. The instrument is available in field and panel mount configurations, single or dual-channel input and equipped with one 4 to 20mA output, fully scaleable and reversible for each input channel. The unit also features two relays, plus the ability to support two additional externally mounted relays (for a total of four). Relay operation is selectable for High, Low, Window or Off, and includes fully
System Overview
In-Line Sensor Installation
Pipe, Tank, Wall MountPanel Mount
+GF+ SIGNET 8250 Level Instrument
+GF+ SIGNET Pressure Sensor (sold separately)
www.gfsignet.com
+GF+ SIGNET 8250 Level Instrument
+GF+ SIGNET Universal Adapter Kit
(3-8050) (sold separately)
+GF+ SIGNET Pressure Sensor (sold separately)
Fittings - Customer supplied
Pipe, Wall, Tank and Integral Mount
adjustable hysteresis and trigger time delay. The unit also has the ability to accept other level sensors with 4 to 20mA output via the +GF+ SIGNET 8058 Signal Converter. Automatic level­to-volume conversion allows display and control of tank level and/or volume in units such as gallons, kilograms, feet or meters. Simply enter the dimensions of your tank or vessel, and the instrument will calculate volume from the level measurement.
E171559
Submersible Sensor
Integral Mount
+GF+ SIGNET 8250 Level Instrument
+GF+ SIGNET Integral Adapter Kit
(3-8052) (sold separately)
+GF+ SIGNET Pressure Sensor (sold separately)
Panel, Pipe, Tank, Wall Mount
+GF+ SIGNET 8250 Level Instrument
Pipe extension or conduit with 3/4 in. FNPT threads
+GF+ SIGNET Pressure Sensor (sold separately)
*
For submersible pipe, tank or wall mount installations, user must use the Universal Adapter Kit (3-8050)
Installation*
Features
•Level units for: ft., in., m, cm, %
•Volume units for: gal.,
3
in
, lbs., l, m3, kg, %
•Advanced relay con­trol supports up to 4 relays
•Output simulation
•Manual (up to 10 pts.) and automatic level­to-volume conversion
• Display level, volume or both
• Specific gravity entry for use with pressure sensors and mass unit conversion
•User-selectable aver­aging for display and output
•Accepts other level sensors with 4 to 20mA output
Application
• Continuous level and/ or volume monitoring
•Local or remote display
• Fill start/stop control
• Pump protection
• Inventory manage­ment
• Storage tank monitor­ing
• Pump station control
•Waste sumps
• Clarifiers
• Plating lines
•Neutralization tanks
•Overflow protection
•Leak detection
Compatible Sensors
The 8250 ProcessPro® Level Transmitter is compatible with the following +GF+ SIGNET sensor: 2450 See individual catalog pages for more information.
1
Page 2
Dimensions
3-8250-XP
96mm (3.8 in.)
96 mm
3.8 in.
Optional
 Splashproof Rear Cover
41 mm 
(1.6 in.)
Field version with universal mount
42 mm (1.7 in.)
106 mm (4.2 in.)
56 mm  (2.2 in.)
97 mm
(3.8 in.)
64 mm (2.5 in.)
82 mm (3.23 in.)
Model 8250 Ordering Notes:
)Field mount instruments can be
1
mounted with a sensor in an integral configuration by choosing the following:
Order integral adapter kit 3-8052 (sold separately) to
connect the instrument directly onto the sensor.
See page xx for more info.
2) An optional splashproof rear
cover can be ordered separately if needed.
3) Use the universal mounting kit
with the field mount instrument to mount to a pipe, tank or wall.
4) Two additional relays can be
used with this product. See part numbers 3-8059-2 or 3-8059­2AC (page xx).
5) To mount the panel version on
a wall, use heavy duty wall mount bracket.
6) Order RC filter kit to protect
relays from voltage spikes.
For More Information:
For wiring information see page xx.
For installation tips and information see page xx.
See page xx for more information on accesso­ries & replacement parts.
2
Specifications
General
Compatible Sensors:
+GF+ SIGNET pressure sensor versions
with digital (S
3
L) output or other sensors
with 4 to 20mA output (via Model 8058) Display: Alphanumeric 2 x 16 LCD Sealed 4-button keypad Display update rate: 1 second Contrast: User selected, 5 levels
Materials
Case: Polybutylene (PBT) Panel case gasket: Neoprene Window:
Polyurethane-coated polycarbonate
Keypad: Silicone rubber
Electrical
Input Power:
12 to 24VDC ± 10% regulated, 250mA max. current
Sensor power:
5VDC ± 1% @ 25°C, regulated (provided by 8250)
Current output:
4 to 20mA, isolated, fully adjust able and reversible Max. loop impedance:
• 50 max. @ 12V
• 325 max. @ 18V
• 600 max. @ 24V Update rate: 300 ms Output accuracy: ± 0.03mA
Ordering Information
Instrument Part Number
Level Transmitter
3-8250
Input(s), Outputs, and Power - Choose one
2
One input with 4 to 20 mA output and two relays; uses 4 wire power
3
Two inputs with Two 4 to 20 mA outputs and two relays; uses 4 wire power
Field or panel mount - Choose one
- Field mount for pipe, wall, tank, or integral mounting
P Panel mount with mounting bracket and panel gasket
3-8250 -2 P Example Part Number
Mfr. Part No. Code
3-8250-2 159 000 766 3-8250-2P 159 000 767
Electrical (continued)
Relay outputs:
2 sets mechanical SPDT contacts standard with all units Software supports 2 additional relays via
optional external relay module (3-8059)
Maximum voltage rating:
• 5A @ 30VDC
• 5A @ 250VAC, resistive load
Programmable for High or Low setpoint or for Window range, with adjustable hysteresis
Time delay:
programmable from 0 to 6400sec
Environmental
Enclosure rating: NEMA 4X/IP65 front Operating temp.:
-10°C to 70°C (14°F to 158°F)
Storage temperature:
-15°C to 80°C (5°F to 176°F)
Relative humidity:
0 to 95%, non-condensing
Maximum altitude: 2,000m (6,562ft.)
Shipping Weight: 0.325 kg (0.8 lbs)
Standards and Approvals
CSA, CE, UL listed
•Immunity: EN50082-2
Emissions: EN55011
Safety: EN61010
Manufactured under ISO 9001:2000 for Quality and ISO 14001:1996 for Environmental Management
Mfr. Part No. Code
3-8250-3 159 000 768 3-8250-3P 159 000 769
Accessories and Replacement Parts
Mfr. Part No. Code Description
Mounting
3-8050 159 000 184 Universal mounting kit 3-8050.395 159 000 186 Splashproof rear cover 3-8052 159 000 188 3/4” Integral mounting kit 3-0000.596 159 000 641 Heavy duty wall mount bracket (for panel mount only) 3-5000.598 198 840 225 Surface mount bracket 3-8050.392 159 000 640 Model 200 retrofit adapter
Liquid Tight Connectors
3-9000.392 159 000 368 Liquid tight connector kit for rear cover (3 connectors) 3-9000.392-1 159 000 839 Liquid tight connector kit, NPT (1 piece) 3-9000.392-2 159 000 841 Liquid tight connector kit, PG13.5 (1 piece)
Other
3-8050.396 159 000 617 RC Filter Kit (for relay use), 2 per kit 3-8058-1S xxx xxx xxx 4 to 20mA to digital signal converter, single input, loop powered 3-8058-2S xxx xxx xxx 4 to 20mA to digital signal converter, dual input, loop powered 3-8059-2 159 000 770 External relay module, 2 relays; requires 12 to 24VDC 3-8059-2AC 159 000 771 External relay module, 2 relays; w/power supply, 100 to 240VAC
www.gfsignet.com
Loading...