George Oliver W005930181 Assembly Instructions

Label Picture Description QTY

A Top Panel 1

B Left Side Panel 1

C Right Side Panel 1

Caution : You must read this before you proceed

MULTI-FUNCTIONAL CABINET

Page 1 OF 15

D Center Panel 1
E Middle Panel 2

F Shelf Panel 4

G Back Panel 2
H Bottom Panel 1

I Leg Support 4

J Leg 4

Label Picture Description QTY

① Cam Lock 15

② Cam Bolt 15

③ Cam Cap 15

Page 2 OF 15

④

Positioning Dowel

(8*30mm)

21

⑤

Cap Wood Screw

(6*50mm)

7

⑥ Screw (4*20mm) 17

⑦ Nail 39

⑧ Metal Shelf Support 17

⑨ Allen Key 1

⑩

Screwdriver

(not provided)

1

⑪

Hammer

(not provided)

1

⑫

Power Drill

(not provided)

1

⑬ Metal Bracket 4

⑭ Wall Plug 2

⑮ Wall Plug Screw 2

⑯ Pan Head Screw 2

⑰

Cabinet Restraint

Strap

2

Cabinet Restraint Device Hardware

Page 3 OF 15

Overview

Before

Beginning

Assembly:

FRONT FACING

Left Side Panel (B)

Leg Support (I)

X 15

X 15

X 15

X 21

X 7

X 17

X 39

X 17

X 1

X 1

X 1

X 1

Middle Panel (E)

Back Panel (G)

Leg (J)

X 2

X 4

X 4

Top Panel (A)

Right Side Panel (C)

Center Panel (D)

Shelf Panel (F)

Shelf Panel (F)

Bottom Panel (H)

Middle Panel (E)

Shelf Panel (F)

Shelf Panel (F)

Page 4 OF 15

Step 1

Step 2

This Multi-Functional Cabinet has multiple parts and may require
up to 60 minutes to assemble. To give you an overview of the
Multi-Functional Cabinet parts, the above picture is to help you put
the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps
before assembly.

2.1) Insert Cam Locks(①) into mounting positions on Left Side
Panel(B) by hand.

2.2) Insert Positioning Dowel(④) into mounting positions on Left
Side Panel(B) by hand.

2.3) Attach Cam Bolts(②) to mounting positions on Left Side
Panel(B) with Screwdriver(⑩).

2.4) Repeat the same process on the Right Side Panel(C).

Unpack and place all parts on a clean, non-marring surface.
Attach Cam Bolts(②) to mounting positions on Top Panel(A) with
Screwdriver(⑩).

B

A

⑩②④

②

⑩

④

①

①

②

2.2

2.1

2.3

⑩

①

②

④

④

④

C

②

②

①

①

④

④

④

④

⑩

Page 5 OF 15

Step 3

Step 4

Lift Center Panel(D) upward with help from another adult.
Attach Cam Bolts(②) to mounting positions on the opposate face
of Center Panel(D) with Screwdriver(⑩).

3.1) Insert Cam Locks(①) into mounting positions on Center
Panel(D) by hand.

3.2) Insert Positioning Dowel(④) into mounting positions on
Center Panel(D) by hand.

3.3) Attach Cam Bolts(②) to mounting positions on Center
Panel(D) with Screwdriver(⑩).

②①①

3.1

①

3.3

3.2

⑩

②

④

D

④

④④④

⑩

②

D

②

⑩

②

②

⑩

Page 6 OF 15

Step 5
Step 6

6.1) Insert Positioning Dowels(④) from Middle Panels(E) into
mounting positions on Center Panel(D).

Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.

6.2) Insert the mounting positions on side of Middle Panels(E)

onto Cam Bolts(②) on Center Panel(D).

6.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩)
until they all lock into place.

5.1) Insert Cam Locks(①) into mounting positions on Middle
Panels(E) by hand.

5.2) Insert Positioning Dowels(④) into mounting positions on
Middle Panels(E) by hand.

E

④

①

①

④

④

⑩

②

①

5.1

5.2

①

①

①④④

④

E

E

6.2

6.3

6.1

D

E

①

①

①

①

④

④

④

④

Arrow

NOTE

Cam Bolt

Mounting Position

①

①

④

②

Page 7 OF 15

Step 7
Step 8

8.1) Insert Positioning Dowels(④) from Middle Panels(E) into
mounting positions on Right Side Panel(C).

Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.

8.2) Insert the mounting positions on side of Middle Panels(E)

onto Cam Bolts(②) on Right Side Panel(C).

8.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩)
until they all lock into place.

7.1) Insert Positioning Dowels(④) from Middle Panels(E) into
mounting positions on Left Side Panel(B).

Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.

7.2) Insert the mounting positions on side of Middle Panels(E)

onto Cam Bolts(②) on Left Side Panel(B).

7.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩)
until they all lock into place.

④

E

B

8.1

8.2

8.3

①

②

⑩

E

C

Arrow

NOTE

Cam Bolt

Mounting Position

①

①①④

②

②

Page 8 OF 15

Step 9
Step 10

Step 11

Attach Cam Caps(③) to all Cam Locks(①) by hand.

10.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right
Side Panel(C) and Center Panel(D) into mounting positions on
Bottom Panel(H).

10.2) Attach Bottom Panel(H) to Cabinet Assembly using Cap
Wood Screw(⑤) with Allen Key(⑨).

9.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right
Side Panel(C) and Center Panel(D) into mounting positions on
Top Panel(A).

Note: Ensure the arrows on Cam Locks head points towards
the Cam Bolt mounting positions.

9.2) Insert the mounting positions on side of Left Side Panel(B),

Right Side Panel(C) and Center Panel(D) onto Cam Bolts(②) on
Top Panel(A).

9.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩)
until they all lock into place.

⑤

③

H

④

①
④

①

⑩

②

C

B

D

A

⑨

B

C

D

10.1

10.2

9.1

9.2

9.3

③

③

③

③

③

③③③

③

③③③

③

③

Arrow

NOTE

Cam Bolt

Mounting Position

①

①

④

②

Page 9 OF 15

Step 12

Step 13

Step 14

Flip the whole Cabinet over.
Attach Back Panel(G) to Cabinet Assembly using Nails(⑦) with
Hammer(⑪).

Please be extra careful when using Hammer to avoid injury.
Note: Hit Nails(⑦) along all four edges (slightly inwards from
sides) on the lines drawn on the Back Panel(G).

Attach Leg Supports(I) to Bottom Panel(H) using Screws(⑥) with
Screwdriver(⑩).

Tighten the Screws fully in a sequential manner.
Note: There are pre-existing mounting positions on the
Bottom Panel(H) to attach the Leg Supports(I).

Attach Legs(J) to Leg Supports(I) by rotating clockwise by hand.

CAUTION

⑩

⑥

I

I

J

⑪

G

I

⑦

H

⑦

G

Note

⑦

⑦

Page 10 OF 15

Step 15

Step 16

Put Shelf Panels(F) in place on Metal Shelf Supports(⑧).

Insert Metal Shelf Supports(⑧) into mounting positions on Left
Side Panel(B), Right Side Panel(C) and Center Panel(D) by hand.

B

C

D

⑧

F

F

F

F

Page 11 OF 15

Step 17

！ WARNING

Serious or fatal crushing injuries can occur from tipping furniture.

To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet

Restraint Device.

See product instructions for more ways to help prevent furniture tip-over.

Usage For Cabinet Restraint Device:

To secure Multi-Functional Cabinet against wall, attach two Metal
Brackets(⑬) on wall and product, use Cabinet Restraint
Strap(⑰) to connect the Metal Brackets(⑬).

Instructions:

Turn the Multi-Functional Cabinet so the back side faces you.
Attach Metal Bracket(⑬) to Back Panel(I) using Pan Head

Screws(⑯) with Screwdriver(⑩).

⑯

⑩

⑬

⑬

⑬

G

G

Page 12 OF 15

Step 18

Step 19

Step 20

18.1) Drill two holes on wall at same height as Metal Brackets(⑬)
on Multi-Functional Cabinet with Power Drill(⑫).
You can mark these points in two ways as below:

1) Move the Multi-Functional Cabinet back to the wall. Mark two
points same height as Multi-Functional Cabinet on the wall.
Note: The Metal Brackets need to be secured to solid, load
bearing surface. Please use a Stud Finder(not supplied) if needed
to locate the Wall Frame.

2) Measure the height of the Metal Brackets(⑬) with
ruler/measuring tape and mark on wall to keep them accurate and
same height.

18.2) Insert Wall Plugs(⑭) into drilled holes on wall with
Hammer(⑪).

Attach Metal Brackets(⑬) to Wall Plugs(⑭) using Wall Plug
Screws(⑮) with Screwdriver(⑩).

⑪

⑮

⑰⑬⑭

⑫

18.2

18.1

⑭

⑬
⑩⑬⑬

⑬

⑰

⑰

⑭

⑭

Page 13 OF 15

Step 21

Your Multi-Functional Cabinet is ready for use.

This Multi-Functional Cabinet can only be used on a flat, level
surface.

Move Multi-Functional Cabinet to the wall.
Pull the Restraint Straps(⑰) through the Metal Brackets(⑬) on
the wall and Multi-Functional Cabinet one by one, and pull the
Restraint Straps(⑰) tight.

Page 14 OF 15

Page 15 OF 15