George Oliver W002379693 Installation & Assembly (Loveseat)

Assembly Instructions

Caution: You must read this before you proceed

Loveseat

CAUTION: This Loveseat is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever lifting or moving the Loveseat and to prevent damage to the
Loveseat, two adults may be needed to execute these actions.

1

Label Picture Description QTY

A Seat Panel 1

B Backrest Panel 1

C Leg Frame 2
D Seat Cushion 1

E Pillow 2

Label Picture Description QTY

①

Bolt

(M6x30mm)

9

②

Bolt

(M6x40mm)

7

③

Screw

(M6x40mm)

4

④ Allen Key 2

Hardware

Part List

2

Assembly Preparation

Before Beginning Assembly:

3

This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Loveseat parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.

Unpack and place all parts on a clean, non-marring surface.

Step 1

Overview

Assembly Steps

4

Place Seat Panel(A) facedown on a clean, non-marring surface.
Attach Leg Frame(C) to Seat Panel(A) using Bolts(①) with Allen Key(④).

Do not fully tighten the Bolts.

Step 2

Step 3

Attach the remanning Leg Frame(C) to Seat Panel(A) using Bolts(①) with Allen
Key(④).

Do not fully tighten the Bolts.

5

Place Backrest Panel(B) on a clean, non-marring surface.
With assistance from your adult partners, align Seat Panel(A) to Backrest Panel(B) as
shown above.
Attach Backrest Panel(B) to Seat Panel(A) using Bolts(②) with Allen Key(④).

Do not fully tighten the Bolts.

Step 4
Step 5

Attach Backrest Panel(B) to Seat Panel(A) using Screw(③) with Allen Key(④)

Do not fully tighten the Screws.

6

Step 7

EXERT pressure, floorwards onto the Loveseat with both hands.
Inspect the Loveseat and make sure all parts are adequately connected.
Carefully sit onto the Loveseat.
This pressure will help align all parts at all joints.
In a sequential manner, tighten all Bolts at all joints.

Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.

Step 6

Place Seat Cushion(D) onto the Loveseat then tie the velcro of Seat Cushion (D) to the
Chair as shown above
With assistance from your adult partners, turn the Loveseat right side up, place Pillow (E
) to the Chair as shown above

7

8