Page 1
Assembly Instructions
Caution: You should read this carefully before proceeding
Side Table
Please look in the Table Top for hardware packs.
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Table and to prevent damage to the product, 02
people may be needed to execute this action.
1
Page 2
Label Picture Description QTY
A Table Top 1
B Leg 4
Label Picture Description QTY
①
Bolt
(M6x50mm)
9
②
Washer
(M6.5/20x2mm)
9
③ Allen Key 1
Part List
Hardware
2
Page 3
Assembly Steps
Assembly Preparation
Before Beginning Assembly:
Overview
This Table has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Table parts, the above picture is to help you put the various parts into
perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Legs (B)
Table Top (A)
FRONT FACING
3
Page 4
Step 3
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
Place the Table Top (A) with its underside facing upwards onto a clean, soft surface to
avoid any scratch or damage to the product.
Loosely affix the Leg(B) into the mounting positions at the corners of the Table Top (A),
using the Bolts(①) with Flat Washers(②) and the Allen Key(③), as shown above.
Repeat the same process with the other Legs (B).
CAUTION: When tightening these Bolts, tighten sequentially.
DO NOT tighten any screw fully and then move towards the next one.
This could cause the frame to warp.
WARNING ! IF THE END TABLE IS NOT STABLE , IT COULD LEAD TO DAMAGE
OF THE PRODUCT.
Turn the Table right side up
Ensure all bolts are fully locked into position.
The Table is ready to be used.
Caution: This Table can only be used on a flat, level surface.
A
4
Page 5
5
Loading...