Page 1
components
twin platform bed assembly
Please note: actual bed may look
dierent than illustration.
item description qty
A Metal corners 4
B Metal side rail 2
C Metal end rail 2
D Wood leg 4
K
A
B
C
item description qty
E Center support rail 1
F Center support leg 1
G Upholstered side rail 2
H Upholstered foot rail 1
J
K Headboard 1
Wooden slat roll - not shown
(located in headboard box)
1
G
H
E
F
D
hardware
(H1) x 10
1/4” bolt
(H11) x 1
Wrench
Please note: you will need a at head screwdriver to assemble your bed frame. This assembly requires two people.
(H2) x 14
1/4” nut
(H14) x 4
3" x 5/16" bolt
(H5) x 5
1” x 1/4” bolt
(H15) x 18
2" x 5/16" bolt
(H6) x 1
3/4” washer
(H8) x 26
1 1/4” washer
(H9) x 1
L wrench
1
Page 2
twin platform bed assembly
step 1 - building the metal bed frame
1.1
Place (A) metal corners in a
rectangular shape roughly the size
of your mattress.
1.2
Lay (B) and (C) metal rails into (A) metal
corners to create the shape of your bed
frame. Snap into place.
1.3
Secure (B, C) metal rails to (A) metal
corners using (H1) bolts and (H2) nuts.
Tighten using (H9) L wrench and (H11)
wrench.
Please note: (H2) nuts should be on the
inside of the frame.
Questions? Call us
2
Page 3
twin platform bed assembly
step 2 - attaching the headboard and upholstered rails
2.1
Attach (D) wood legs to (K)
headboard and (H) upholstered foot rail
using (H8) washer.
2.2
2.3
2.2
Loosely attach (K) headboard to the metal
bed frame using (H14) bolts, (H8) washers
and a flat head screwdriver.
2.3
Loosely attach (H) upholstered foot rail
to the metal bed frame using (H15) bolts,
(H8) washers and a flat head screwdriver.
Please note: we reccommend one
person hold the frame and upholstered
pieces in place while a second person
attaches the hardware.
2.4
Loosely attach (G) upholstered side rails
to the metal bed frame using (H15) bolts,
(H8) washers and a flat head screwdriver.
Questions? Call us
Please note: do not tighten bolts until
after both side rails have been attached.
3
Page 4
twin platform bed assembly
step 3 - center support system
3.1
Align holes of (E) center support rail
with holes on (B) metal side rails.
Attach using (H1) bolts and (H2) nut.
Tighten using (H9, H11) wrenches.
B
E
Please note: (E) center support rail
attaches underneath (B) metal side
rails.
3.2
Attach (F) center support legs to (E,I)
support rails using (H5) bolts and (H6)
washers. Tighten using (H9) L wrench.
Please note: (F) center support legs
can be adjusted in height by twisting
the foot at the bottom of the leg.
Questions? Call us
4
Page 5
twin platform bed assembly
step 3 - center support system
3.3
Carefully place the (J) wooden slat
rolls onto the bed frame. Attach using
(H5) bolts and (H2) nuts. Tighten with
(H9, H11) wrenches.
Please note: The black band that
holds the slats together should face
the floor.
limited warranty
We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect is brought to our attention,
we will repair or replace it at our option at no charge to the customer (inculdes parts and labor, not transportation costs). Fabric wearability for
upholstered furniture is not covered by the warranty. Vacuum for regular cleaning.
PLEASE DISPOSE OF PLASTIC BAGS AND CARTONS RESPONSIBLY.
Questions? Call us
5
Loading...