WARNING!!
Furniture Tipping Risk.
Serious risk of severe or fatal crush injuries can occur from
furniture tipping over if not secured.
Children like to climb on furniture and Unsecured furniture
can pose a serious danger.
Please follow all instructions and install the tip-over restraints
provided.
In addition to installing the restraints, to help prevent tip-over:
1. Unless specifically designed to accommodate, do not set
TV’s or other heavy objects on top of this product.
2. Never allow children to climb or hang on the Cabinet.
3. Do not step on the Cabinet base.
Page 1 OF 18
Label Picture Description QTY
A Top Panel 1
B
Left Side Panel
(with Metal Bracket)
1
C
Right Side Panel
(with Metal Bracket)
1
Caution : You must read this before you proceed
Multi-Functional Cabinet
Page 2 OF 18
D Left Center Panel 1
E Right Center Panel 1
F Small Middle Panel 2
G Big Middle Panel 4
H Shelf Panel 4
I Back Panel 1
J Bottom Panel 1
K Leg 4
L Middle Leg 1
Page 3 OF 18
Label Picture Description QTY
① Cam Lock 33
② Cam Bolt 33
③ Cam Cap 33
④
Positioning Dowel (Ø
8*30mm)
41
⑤
Cap Wood Screw
(M6*50mm)
9
⑥ Shelf Support 17
⑦ Allen Key 1
⑧ Nail 57
⑨ Screw (M3.5*16mm) 21
⑩
Screwdriver (not
provided)
1
⑪
Hammer (not
provided)
1
⑫
Power Drill (not
provided)
1
Page 4 OF 18
⑬ Metal Bracket 4
⑭ Wall Plug 2
⑮ Wall Plug Screw 2
⑯
Cabinet Restraint
Strap
2
Before
Beginning
Assembly:
Cabinet Restraint Device Hardware
X 33
X 33
X 33
X 41
X 9
X 1
X 1
X 4
X 1
X 1
X 1
X 2
X 57
X 21
X 17
A
IBD
E
CHF
G
H
J
GGF
H
G
H
Page 5 OF 18
Step 1
Overview
This Multi-Functional Cabinet has multiple parts and may require up to 60
minutes to assemble. To give you an overview of the Multi-Functional
Cabinet parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Attach Cam Bolts(②) to mounting positions on Top Panel(A) with
Screwdriver(⑩).
FRONT FACING
Leg (K)
Right Side Panel (C)
Shelf Panel (H)
Middle Leg (L)
Big Middle Panel (G)
Left Side Panel (B)
Back Panel (I)
Top Panel (A)
A
②
②
②
②
②②②
②
Small Middle Panel (F)
Right Center Panel (E)
Bottom Panel (J)
Left Center Panel (D)
Shelf Panel (H)
②
⑩
Page 6 OF 18
Step 2
Step 3
Attach Cam Bolts(②) to mounting positions on Left Center Panel(D) with
Screwdriver(⑩).
2.1) Insert Cam Locks(①) into mounting positions on Left Side Panel(B) by
hand.
2.2) Insert Positioning Dowel(④) into mounting positions on Left Side
Panel(B) by hand.
2.3) Attach Cam Bolts(②) to mounting positions on Left Side Panel(B) with
Screwdriver(⑩).
2.4) Repeat the same process on the Right Side Panel(C).
④
2.2
D
①
②
④
②
②
⑩
2.3
B
C
②
②
②
④
④
④
①
①
2.1
①
②
②②②④④
④④①
②
⑩
②②②
RIGHT FACE
Page 7 OF 18
Step 4
Step 5
Attach Cam Bolts(②) to mounting positions on Right Center Panel(E) with
Screwdriver(⑩).
4.1) Insert Cam Locks(①) into mounting positions on Left Center Panel(D)
by hand.
4.2) Insert Positioning Dowels(④) into mounting positions on Left Center
Panel(D) by hand.
4.3) Attach Cam Bolts(②) to mounting positions on Left Center Panel(D)
with Screwdriver(⑩).
②⑩④
4.2
②
②
②
②
④
④
④
④
4.1
①
①
①
LEFT FACE
D
4.3
E
②②②
②
②
⑩
LEFT FACE
Page 8 OF 18
Step 6
Step 7
6.1) Insert Cam Locks(①) into mounting positions on Right Center Panel(E)
by hand.
6.2) Insert Positioning Dowels(④) into mounting positions on Right Center
Panel(E) by hand.
6.3) Attach Cam Bolts(②) to mounting positions on Right Center Panel(E)
with Screwdriver(⑩).
7.1) Insert Cam Locks(①) into mounting positions on Small Middle
Panels(F) by hand.
7.2) Insert Positioning Dowel(④) into mounting positions on Small Middle
Panels(F) by hand.
RIGHT FACE
②
⑩
6.3
④
6.2
6.1
①
④④②
②
②②①
①
④
④
E
④
7.2
7.1
①
F
F
④
Page 9 OF 18
Step 8
Step 9
9.1) Insert Positioning Dowels(④) on Small Middle Panels(F) into Right
Center Panel(E) as shown above.
Insert Cam Bolts(②) on Right Center Panel(E) into Small Middle Panels(F).
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position.
9.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
9.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
8.1) Insert Cam Locks(①) into mounting positions on Big Middle Panels(G)
by hand.
8.2) Insert Positioning Dowel(④) into mounting positions on Big Middle
Panels(G) by hand.
8.1
①
④
8.2
G
G
G
G
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
E
F
F
④
9.1
⑩
②E①
F
9.3
③
①
9.2
Page 10 OF 18
Step 10
Step 11
10.1) Insert Positioning Dowels(④) on Small Middle Panels(F) into Left
Center Panel(D).
Insert Cam Bolts(②) on Left Center Panel(D) into Small Middle Panels(F).
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position.
10.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
10.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
11.1) Insert Positioning Dowels(④) on Big Middle Panels(G) into Right
Center Panel(E) and Left Center Panel(D).
Insert Cam Bolts(②) on Right Center Panel(E) and Left Center Panel(D)
into Big Middle Panels(G).
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position before do 11.1).
11.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
11.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
D
E
F
F
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
G
G
G
G
E
D
F
F
④
10.1
⑩
②
D①F
10.3
③
①
④
11.1
⑩
②
D
①
G
11.3
③
①
10.2
11.2
Page 11 OF 18
Step 12
Step 13
13.1) Insert Positioning Dowels(④) on Big Middle Panels(G) into Left Side
Panel(B).
Insert Cam Bolts(②) on Left Side Panel(B) into Big Middle Panels(G).a
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position.
13.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
13.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
12.1) Insert Positioning Dowels(④) on Big Middle Panels(G) into Right Side
Panel(C).
Insert Cam Bolts(②) on Right Side Panel(C) into Big Middle Panels(G).a
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position.
12.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
12.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
D
E
C
G
G
G
G
F
F
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
C
E
D
B
F
G
G
GGF
④
12.1
⑩
②
C
①
G
12.3
③
①
④
13.1
⑩
②
C
①
G
13.3
③
①
12.2
13.2
Page 12 OF 18
Step 14
Step 15
14.1) Insert Positioning Dowels(④) on Left Side Panel(B), Left Center
Panel(D), Right Center Panel(E) and Right Side Panel(C) into Top
Panel(A).
Insert Cam Bolts(②) on Top Panel(A) into Left Side Panel(B), Left Center
Panel(D), Right Center Panel(E) and Right Side Panel(C).
Note: Ensure the arrow on Cam Lock head points towards the Cam
Bolt mounting position.
14.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑩) until they
lock into place.
14.3) Cover Cam Locks(①) with Cam Caps(③) by hand.
15.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right Side
Panel(C), Left Center Panel(D) and Right Center Panel(E) into mounting
positions on Bottom Panel(J).
15.2) Attach Bottom Panel(J) to Left Side Panel(B), Right Side Panel(C),
Left Center Panel(D) and Right Center Panel(E) using Cap Wood
Screws(⑤) with Allen Key(⑦).
A
E
D
B
CGF
F
G
G
G
A
B
CED
G
GGG
J
F
F
Arrow
NOTE
Cam Bolt
Mounting Position
①
①
④
④
14.1
⑩
②
A
①
B
14.3
③
①
15.2
⑤
⑦
15.1
④
J
C
14.2
Page 13 OF 18
Step 16
Step 17
Attach Back Panel(I) to Multi-Functional Cabinet Assembly using Nails(⑧)
with Hammer(⑪).
Please be extra careful when using a Hammer to avoid injury.
Note: Hit Nails along all four edges (slightly inwards from sides) on
the lines drawn on the Back Panel(I).
Attach Legs(K) and Middle Leg(L) to Bottom Panel(J) using Screws(⑨) with
Screwdriver(⑩).
Tighten the Screws fully in a sequential manner.
Caution: Legs(K) should be facing outwards. Misassembly and
reassembly may cause damage and instability to the product.
Note: There are pre-existing mounting positions on the Bottom Panel
to attach the Legs and Middle Leg.
⑩
⑨
⑨
⑨
⑨
L
⑨
⑨
⑨
⑩
B
J
K
I
B
J
CAUTION
⑧
⑪
I
⑧
⑧
⑧
NOTE
Page 14 OF 18
Step 18
Step 19
Insert Metal Shelf Support(⑥) into mounting positions on Left Side
Panel(B), Right Side Panel(C), Left Center Panel(D) and Right Center
Panel(E) by hand.
Put Shelf Panels(I) in place on Shelf Supports(⑥).
Note: There are lead mounting positions on Shelf Panels to fit Metal
Shelf Supports.
⑥
E
B
C
A
E
D
I
G
G
G
G
J
F
F
NOTE
H
⑥
HHH
H
B
C
D
E
JGG
G
G
A
Page 15 OF 18
Step 20
Step 21
！ WARNING
Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet
Restraint Device.
See product instructions for more ways to help prevent furniture tip-over.
Usage For Cabinet Restraint Device:
To Secure Multi-Functional Cabinet against wall, attach Metal Brackets(⑬)
to wall and product, and use Cabinet Restraint Straps(⑰) to connect the
Metal Brackets(⑬).
Instructions:
21.1) Drill two holes on wall at same height as Metal Brackets(⑬) on Multi-
Functional Cabinet with Power Drill(⑫).
You can mark these points in two ways as below:
1) Move the Multi-Functional back to the wall. Mark two points same height
as pre-assembled Metal Bracket(⑬) in Multi-Functional Cabinet on the
wall.
Note: The Metal Brackets need to be secured to solid, load bearing
surface. Please use a Stud Finder(not supplied) if needed to locate the
Wall Frame.
2) Measure the height of the Metal Brackets(⑬) with ruler/measuring tape
and mark on wall to keep them accurate and same height.
21.2) Insert Wall Plugs(⑮) into holes on wall with Hammer(⑪).
⑪
⑭
⑫
21.2
21.1
⑭
⑭
Page 16 OF 18
Step 22
Step 23
Step 24
Move the Multi-Functional Cabinet back against wall. Pull the Restraint
Straps(⑰) through the Metal Brackets(⑬) on the wall and Multi-Functional
Cabinet one by one, and pull the Restraint Straps(⑰) tight.
Note: There are lead mounting positions on Back Panel to allow
Restraint Straps(⑰) to be inserted through.
Your Multi-Functional Cabinet is ready for use.
This Multi-Functional Cabinet can only be used on a flat, level surface.
Attach Metal Brackets(⑬) to Wall Plugs(⑭) using Wall Plug Screws(⑮)
with Screwdriver(⑪).
⑬
⑮
⑩
⑭
⑮
⑮
NOTE
⑬
⑬⑬⑬
⑰
⑰
⑰
Page 17 OF 18
Page 18 OF 18
Loading...