Page 1
CARE AND MAINTENANCE
* Please make sure that you have all parts indicated before you begin assembly of this
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE QUANTITY
A
B
HW1
HW2
HW3
DESCRIPTION PICTURE
Top part
Leg
Allen bolt 40x6 mm
Flat washer 25 mm
Allen key 4 mm
1X
2X
6X
6X
1X
Product dimensions: 35"W* 15.7"D* 29.9"H
WARNING
Weight Capacity - 110 LBS
Warning : Do not stand on Desk
Warning : Do not over torque bolts.
The legs and hardware are located under the drawer
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP1 OPEN THE ZIPPER ON THE INSIDE OF THE DRAWER
AND TAKE OUT THE HARDWARE AND LEGS FROM PACKING
The legs and hardware are located under the drawer
STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE
STEP3 INSERT THE FRONT LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY
Loading...