Page 1
PIECE QUANTITY
A
1×
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Screw Washer
THE DESIGN OF THE CHAIR IN THE DRAWINGS MAY
VARY FROM YOUR ACTUAL CHAIR, BUT ASSEMBLY IS
THE SAME ON ALL MODELS.
BCD
E
4×
12×
12×
1×
Screw
Allen Key
Leg
DESCRIPTION
PICTURE
Seat Panel
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
ASSEMBLY INSTRUCTIONS APPLICABLE FOR ALL
OUR DINING CHAIRS.
Page 2
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP 1 ATTACH LEGS(B))TO SEAT PANEL(A),USING HARD WARE(C),(D)
TIGHTEN WITH ALLEN KEY(E).SEE PICTURE ABOVE.
STEP 2 TURN OVER THE PRODUCTS. THE ASSEMBLY IS FINISHED.
PREPARATION
Loading...