Page 1
Label Picture Description QTY
A Table Top 1
B Table Leg 4
C Cross Bar 2
Assembly Instructions
Caution : You must read this before you proceed
BAR TABLE
Part List
Page 1 of 6
Page 2
Label Picture Description QTY
①
JCBB M8 x 80mm
+ S/W 5/16"
+ F/W 5/16" x 22mm
8
② Allen Key M5 1
③ JCBC W M7 x 35mm 1
④ Allen Key M4 1
⑤
CSK SCREW M4 x
38mm
4
Before
Beginning
Assembly:
Hardware
Assembly Preparation
Page 2 of 6
Page 3
Step 1
This Bar Table has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Bar Table parts, the above picture
is to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
Overview
Assembly Steps
Crossover the Cross Bar (C) as shown.
Fix the Cross Bar with JCBC Bolt W ③ using Allen Key ④.
DO NOT FULLY TIGHTEN THE BOLT.
Page 3 of 6
Page 4
Step 2
Step 3
(3.1)With assistance from your adult partner, Slot in the Cross Bar (C) into
the mounting position of Table Leg (B) as shown.
(3.2) Then slot in another two Table Legs onto the Cross Bar and Table Leg
Corner Block.
Place the Table top (A) on a soft surface to avoid any scratches or damages
to the product and place the Table Leg (B) onto the of table top corner block
with your adult partner.
Fix the Table Top (A) with JCBB Bolt ① + Spring Washer + Flat Washer
using Allen Key ②.
Repeat the step for another leg.
DO NOT FULLY TIGHTEN THE BOLT.
3.1
3.2
3.2
3.1
Page 4 of 6
Page 5
Step 4
(4.1) Repeat step 2, Fix the Table Leg (B) with JCBB Bolt ① + Spring
Washer + Flat Washer using Allen Key ②.
(4.2) Fix the Cross Bar (C) with CSK Screw ⑤ using Screwdriver (not
provided).
In case the table wobbles, need loosen tighten the screw and bolts, and use
your hand press the top of the table, to make sure the table eveness, and
then full tighten the bolts sequence.
FULLY TIGHTEN THE BOLT.
With assistance from your adult partner, stand the Table up.
Your Table is now ready for use.
Caution: This table can only be used on a flat, level surface.
4.2
4.1
Page 5 of 6
Page 6
Care & Maintenance
Page 6 of 6
Loading...