ASSEMBLY INSTRUCTIONS:
VERY IMPORTANT:
PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY ALIGN POLES BEFORE
SCREWING THEM TOGETHER TO AVOID DAMAGING CONNECTION THREADS.
NOT ADHERING TO THIS PROCEDURE MAY VOID YOUR WARRANTY
1. Carefully unpack and place all lamp parts on a flat surface.
2. Screw bottom tube (B) onto base (A) until tightened.
3. Screw center tube (C) onto bottom tube (B) until tightened.
4. Screw assembly socket (A) onto center tube (C).
5. Install bulb (Bulb not included) into socket.
D Assembly Socket
6. Insert the polarized plug into a wall outlet and enjoy.
7. Use only a soft dry cloth to clean. Never use chemical or abrasive cleaners.
Use a 60W (Maximum) G type bulb (Bulb not included)
C Center Tube
B Bottom Tube
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord
unless plug can be fully and easily inserted. Do not alter the plug.
ATTENTION
POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT
OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ÊTRE INSÉRÉES A FOND SANS EN LAISSER AUCUNE PARTIE À
DÉCOUVERT.
※※※※
PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※※※※
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
A Base
Loading...