George Foreman SKG01GFB User Manual

Please Read and Save this Use and Care Book Por favor lea este instructivo antes de usar el producto

Customer Care Line:

USA/Canada

1-800-231-9786

Accessories/Parts (USA / Canada)

Accesorios/Partes (EE.UU / Canada)

1-800-738-0245

For online customer service and to register your product, go to

www.prodprotect.com/applica

Also view the details for our latest sweepstakes!

Model Modelo

❑SKG01GFB

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

❑Read all instructions.

❑Do not touch hot surfaces. Use handles or knobs.

❑To protect against electric shock do not immerse cord, plugs or appliance in

water or other liquid.

❑Close supervision is necessary when any appliance is used by or near

children.

❑Unplug from outlet when not in use and before cleaning. Allow to cool before

putting on or taking off parts, and before cleaning the appliance.

❑Do not operate any appliance with a damaged cord or plug, or after the

appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. Or, call the appropriate toll-free number on the cover of this manual.

❑The use of accessory attachments not recommended by the appliance

manufacturer may cause injuries.

❑Do not use outdoors.

❑Do not let cord hang over edge of table or counter, or touch hot surfaces.

❑Do not place on or near a hot gas or electric burner, or in a heated oven.

❑Extreme caution must be used when moving an appliance containing hot oil or

other hot liquids.

❑Always attach temperature control probe to appliance first, then plug cord in

the wall outlet. To disconnect, turn any control to OFF, then remove plug from wall outlet.

❑Do not use appliance for other than intended use.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW Warning: This appliance is equipped with a tamper-resistant screw to prevent

removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

a) A short power-supply cord (or detachable power-supply cord) is to be

provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

b) Longer detachable power-supply cords or extension cords are available and

may be used if care is exercised in their use.

c) If a long detachable power-supply cord or extension cord is used,

1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,

2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and

3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

Product may vary slightly from what is illustrated.

† 1. Glass lid (Part # SKG01-01)

2. Cool-touch handles † 3. Variable temperature control (Part # SKG01-02)

4. Indicator light

5. Quick-release lever

6. Probe

7. Pan-tilt leg

8. Steam vent

Note: † indicates consumer replaceable/removable parts

How to use

This product is for household use only.

GETTING STARTED

• Remove all packing material and any stickers.

• Remove and save literature.

• Please go to www.prodprotect.com/applica to register your warranty.

• Wipe cooking surface with a damp cloth or sponge to remove any dust. Wipe dry with a soft cloth or paper towel.

• Select a location where skillet will be used, leaving enough space between the back of the appliance and wall to allow heat to ﬂow without damage to cabinets and walls.

CONDITIONING THE SKILLET

1. Before using your skillet for the ﬁrst time, make sure variable temperature control is removed and wash all parts as instructed in the Care and Cleaning section.

2. To preserve the nonstick coating, spread a light coating of cooking oil over the inside surfaces. Remove excess oil with a cloth or paper towel. You will not have to condition the coating again.

READY TO USE YOUR SKILLET

1. Insert the temperature control probe ﬁrmly into

the socket (B).

Important: Make sure the control probe is securely inserted.

2. Plug unit into a standard electrical outlet.

3. Turn temperature control to desired setting or

according to your recipe. The indicator light comes on. The desired temperature should line up with the indicator light.

4. When the selected temperature is reached, the light goes off.

Note: During cooking the light will blink on and off, indicating the temperature is maintained.

5. When ﬁnished cooking, set temperature control to WARM to keep food at serving temperature.

6. To take the skillet to the table for serving, remove the variable temperature control probe by pressing the quick-release lever and pulling out the control.

Caution: Be careful when removing the probe, as the skillet might stay warm for awhile.

7. Use plastic, silicone, rubber or wood utensils when cooking and serving. If using metal utensils, be careful not to scrape the nonstick ﬁnish.

+ 6 hidden pages