GEORGE FOREMAN
®
MIX & GO WITH CHILL STICKS
Instructions & Warranty
GFBL3002CS_IB&RB_FA_240715
GFBL3002CS
Congratulations on the purchase of your George Foreman Mix & Go. Each unit is
manufactured to ensure safety and reliability. Before using the appliance for the rst time,
please read the instruction book carefully and keep it for future reference. Pass it on if you
pass on the appliance.
When using electrical appliances, basic safety precautions should always be followed.
1
2
7
6
1. Drink Bottle Lid
2. Blender Bottle
3. MAX ll line when using Chill Stick
4. Blade Assembly
3
4
5
5. Blender Base
6. Chill Stick MAX ll line
7. Chill Stick lid
2
BEFORE FIRST USE
CAUTION: Handle blades carefully.
• Remove all packaging material and any stickers from the product.
• As some parts may be packed separately, check to ensure all items have
been unpacked before disposing of the packaging.
• Clean all parts as instructed in the CARE AND CLEANING section
of this manual.
• Freeze the Chill Sticks in advance so these are ready for when you make a drink.
• Detach the Chill Stick from the drink bottle lid by rotating clockwise.
• Open the lid of the Chill Stick and ll to its max line with cool water. Never ll with hot
liquids or solids.
• Close the lid and place in the freezer.
HOW TO USE
Note: Prior to use, the blender bottle should be dismantled and washed as instructed
in the CARE AND CLEANING section of this manual.
• Sit the blender on a stable, level, dry surface.
• Plug the cord into a standard electrical outlet.
• Place the blender bottle on a at surface with the open end facing up.
• Place foods to be blended into bottle, liquids rst, then any solids.
Note: Be sure not to fill ingredients past the 600mL marking of the personal blending
bottle. If using the Chill Stick, do not fill ingredients past the CHILL STICK MAX
marking of the personal blending bottle.
CAUTION: Do not blend hot/warm ingredients - always allow to cool to room
temperature before blending.
• Fasten the blade assembly on to the open end of the blender bottle and turn
it in a clockwise direction until it is locked.
• Turn the bottle upside down & line up arrows on the blade assembly to the
arrows on the blender base and place the blender bottle in the blender base.
• The blender will automatically begin as soon as the blender bottle is pushed
down into the blender base.
• For hands free continuous blending, simply turn the bottle clockwise in
the blender base.
• To stop blending simply remove your hand from the blender bottle or if you have
locked the blender bottle into the base, turn it anti clockwise to release it.
• Once the blades have stopped rotating, pull the blender bottle out of the blender base
& turn the bottle over and place on a at surface.
• Take a Chill Stick from your freezer and attach to the recess on the underside of the
drink bottle lid by rotating anti-clockwise.
• Replace the blade assembly with the drink bottle lid and Chill Stick attached.
3
BLENDING TIPS AND TECHNIQUES
• Put liquids in the blender bottle rst, unless a recipe says otherwise.
It is recommended you use at least 250ml of liquid for optimal results.
• Cut all rm fruits and vegetables into pieces no larger than 1.8cm to 2.5cm.
Ensure frozen solids are no larger than 2cm.
• Don’t overload the bottle. If the motor stalls, turn the blender off immediately, unplug
the unit and let it cool for at least 15 minutes.
• Then remove a portion of the food and continue.
• Never ll the Chill Sticks with hot liquids, solids or anything but cool water.
TASKS NOT RECOMMENDED FOR THE BLENDER:
• Whipping cream
• Whipping egg whites
• Mixing dough
• Mashing potatoes
• Grinding meats
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualied service personnel.
CLEANING
Caution: To prevent possible damage to the appliance do not use harsh abrasive or
alkaline cleaning agents.
• Before cleaning, turn off and unplug appliance.
• Remove blade assembly from the blender bottle.
• Remove the rubber gasket from the blade assembly.
Caution: Blades are sharp, handle carefully.
• Wash removable parts by hand or in your dishwasher. Place bottle and all other
bottle parts on the top-rack only.
Important:
• Do not place bottle parts in boiling liquids.
• Do not immerse the motor unit in liquid. Wipe with damp cloth
and dry thoroughly.
• Remove stubborn spots by rubbing with damp cloth and
non-abrasive cleaner.
Note: If liquids spill onto the motor unit, immediately disconnect cord from the power
outlet & wipe with a damp cloth and dry thoroughly.
TO STORE
• Unplug the unit.
• Snap the drink bottle lid on the other end of the bottle to store.
• Ensure all parts are dry before storing the unit.
4
IMPORTANT SAFEGUARDS
When using this appliance, basic safety precautions should always be followed, including the following:
Read all instructions before, and follow whilst using this appliance.
1. To protect against electric shock do not immerse cord, plug or blender base of unit in water or liquid
of any sort.
2. Do not use outdoors.
3. Do not use in the bathroom or near any source of water.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
4. This appliance is NOT a toy. Children should be supervised to ensure they do NOT play with the appliance.
5. Cleaning or user maintenance shall not be carried out by children without the supervision of a person
responsible for their safety.
6. Always turn off and unplug from the wall power outlet when not in use, before fitting or removing parts, and
before cleaning the appliance.
7. To disconnect, ensure the appliance switch is set to off, turn off the wall power outlet, then grasp and pull the
plug from the wall outlet. Never pull by the cord.
8. Do not operate this appliance with a damaged cord/plug or after the appliance has been dropped, damaged
or has malfunctioned in any manner. Contact customer service for replacement, examination, repair or
adjustment.
9. There are no user serviceable parts. If the power cord or appliance is damaged, it must be repaired or replaced
by the manufacturer or a suitably qualified person in order to avoid hazard.
10. The use of attachments/accessories not recommended by the appliance manufacturer may cause injuries or
damage to the appliance and void warranty.
11. Do not use on an inclined plane or unstable surface.
12. Keep the appliance and the power cord away from the edge of tables or countertops and out of reach of
children and persons with reduced physical, sensory and mental capacities.
13. Before switching on, ensure the bottle has been assembled correctly and has been seated onto the motor unit.
The motor will only operate if the bottle has been properly seated onto the motor unit.
14. Do not use the appliance if the rotating cones are damaged.
15. Care must be taken when handling any accessories with sharp edges. Cutting blades are very sharp.
Handle with extreme care and caution when removing from the bottle and during cleaning.
16. Do not operate the appliance with an empty bottle.
17. Do not blend hot/warm ingredients - always allow to cool to room temperature before blending.
18. Wait until the blades come to a complete stop before before removing the bottle from the motor unit.
19. Do not run the motor for longer than 2 minutes. After 2 minutes, switch off for at least a further 2 minutes to
allow the motor to cool down.
20. Switch off and unplug the appliance before changing accessories or touching parts that move whilst in use.
21. Do not attempt to defeat any safety interlock mechanisms.
22. To prevent possible damage to the appliance do not use harsh abrasive or alkaline cleaning agents.
23. Always clean the appliance after use.
24. Follow the instructions when cleaning this appliance.
25. Do not place on or near any heat sources.
26. Misuse of the appliance may cause injury.
27. Do not leave the appliance unattended when in use.
28. Do not use appliance for other than its intended purpose.
5