Geo Web Pack Quick Start Manual

GET SET UP

1. Select the correct set of pins. Insert

and twist clockwise to clip the pins
to the power supply. Plug the power
supply into a mains socket and insert
the other end into the Internet Bridge.

2. Using the Ethernet cable provided,

connect the Internet Bridge to your
broadband router.

The Internet Bridge will get an IP address

automacally from your router

ENERGYNOTE ONLINE SERVICES

To access your on-line service you must
log in to the web service.

1. Open your web browser on

your computer.

2. Go to: energynote.co.uk/start

3. Create your personal Energynote

account and follow the online

instrucons to set up your

Internet Bridge.

4. Once you have logged in, your online

dashboard will appear on screen.

See and explore the various features that
the online dashboard provides.

Tip: If you would like to see what your
In-Home Display is reading while you
are away from your house you must

remember to leave the broadband router
and the Internet Bridge turned on.

Note: The dashboard features may vary
depending on your parcular supplier.

TECHNICAL INFORMATION

Item: Web Pack
Rated Voltage: 230Vac 50Hz
Input Power: 0.25W
Temperature Range: 0 to 40°C
Humidity: 85% non-condensing

Conforming Standards: EN60950-1
EN301 489-3
EN300 220-1

CE approved. This product is approved
for use in the EU.

The Web Pack is an accessory for your
In-Home Display. It:

• Connects your In-Home Display to

the Internet

• Enables you to monitor your home

and control appliances remotely via
your Energynote web service

What’s inside the Web pack:

Internet Bridge, Power Supply and
Ethernet cable.

SAFETY FIRST:

It is important to observe some simple safety

precauons when using this product. Safe
operaon of the Web Pack is impaired if used in a
manner not specified by the manufacturer.

Keep the Web Pack content away from water and

other liquids. Disconnect before cleaning (with a
so dry cloth only) and do not immerse in water

or other liquids. Please contact your supplier if
any components appear damaged or faulty.

The Web Pack content is designed to be used in

an indoor domesc environment only.

To protect the environment, this product must be
disposed of safely at the end of its life.

This product complies with RoHS regulaons.

CE approved. This product is approved for use in
the EU.

Web Pack

QUICK START GUIDE

ENBR-A-QSG-001_4

Making energy engaging

In-home | mobile | online

Web Pack

QUICK START GUIDE

For a simpler start, go to:

energynote.co.uk/start

Display Pack Web Pack Smart Plug Pack