Genz Benz TAC EX-1502, TACEX-15H, TACEX-15LH, Triton Array Class EX, TACEX-28T Owner's Manual

· When ever possible, avoid exposure to extreme

weather conditions such as direct intense sunlight, or
sub-zero temperatures.

· Use a stiff bristle brush to remove dirt and dust from
carpeting.

· Only use a mild cleaners with a citrus or water base
to remove stains.

Always test an inconspicuous area for

discoloration first.

· Never use solvents or lacquer base cleaners.

· Never expose any of the speaker components to di-

rect rain or liquids. If this occurs stop using the
equipment immediately and contact a qualified repair
consultant.

CARE & MAINTENANCE

WARNING:
Genz Benz enclosures are not designed to be suspended or
hung from any surface of the cabinet. This can only be
achieved with properly installed professional “flying hardware”
and installed by qualified rigging technician.

SET UP TIPS

· Always survey the area you wish to cover with your
speaker system to make sure that your system is
adequately matched for the venue.

· Use good judgment when placing your speakers for
audience coverage so that the speaker system will
disperse over your audience and not directly at ear
level. (

Remember, high frequencies are absorbed much
easier by people, curtains and other soft materials; while
low frequencies are not so easily absorbed)

· Always use good quality speaker cables and never
use guitar cables for hooking-up your speaker sys­tem.

· Important: Always use caution when connect­ing speakers to an amplifier source. The power
amp should be off when making connections.

· Severe hearing loss is possible if subjected to
extended durations of high-output sound levels.

· Always wear hearing protection whenever pos­sible.

TRITON

ARRAY CLASS EX

OWNER’S MANUAL

FEATURES:

· Quality hand-built craftsmanship.

· Computer designed venting for precision per-

formance and durability

· Attractive and durable premium carpet.

· Black 16 gauge heavy duty perforated speaker

grills.

· Classic designs and appearance

· High quality speaker, tweeter and crossover

components.

· LTP—luminous tweeter protection, is designed

into all crossover to absorb excessive high fre­quency voltage.

Proudly manufactured in the U.S.A.

Triton Array Class EX

TAC

EX-28T 80W/160W 75-16K Hz 95 db

TAC

EX-12H 200W/400W 58-16K Hz 98 db

TAC

EX-15H 300W/600W 60-16k Hz 99 db

TAC

EX-15LH 400W/800W 52-15k Hz 100 db

TAC

EX-215LH 800W/1600W 50-15k Hz 102 db

TAC

EX-118 SUB 400W/800W 45-1.5K Hz 99 db

TAC

EX-218 SUB 800W/1600W 40-1.5K Hz 102 db

Triton Array Class EX

This dramatic series of trapezoid enclosures repre­sent the pinnacle of design, performance and value.
Most models feature powerful titanium compression
drivers and 18db crossovers. Standard features in­clude: 3/4” plywood, dense fiberboard baffles with
15 degree tapered sides, high-output woofers, LTP
crossover protection, stand adaptors, cinder gray
carpet, and custom 16 gauge square perforated
steel grills.

CAUTION: Never input a full-range signal to the Bi-amp inputs. When
Bi-amping, the high frequency minimum crossover point should be
1500 Hz @ 12db per octave slope. Lowering the crossover point will
reduce the power handling of the horn.

CROSSOVER CONNECTIONS

TACEX-28T, TACEX-12H, TACEX-15H: Use either

input when connecting to the amp. The second input
may be used for daisy chaining two cabinets to­gether.

TACEX-15LH, TACEX-215LH: These models feature
the most professional input connectors available. Full
range signal connections can be made via 1/4” inputs
or 4 pin Speakon® inputs. For Bi-amping, connec­tions can be made via the same inputs by switching
the switch provided on the crossover panel. Please
refer to the crossover plate for important wiring in­structions for the Speakon® connections.

L.T.P/High Frequency Protection: These models in­clude our four lamp—Luminous Tweeter Protection circuit
that reduces the voltage to the high frequency driver un­der severe conditions. These lamps are visible through
the red LED mounted on the crossover panel.

TACEX-118SUB, TACEX-218SUB: Feature a full­range only, Neutrik 4-pin Speakon connector for im­proved signal input. Pin wiring +1 & +2 are wired to
positive. –1 & -2 are wired to ground.

4 ohm 21 lbs. 23 1/2”x11”x9 1/4” 6K
8 ohm 41 lbs. 25 1/2”x16 1/2”x16 1/2” 3.5K
8 ohm 51 lbs. 29 1/2”x191/2”x16 1/2” 3.5K
8 ohm 70 lbs. 35 1/2”x22”x18 1/2” 1.8K
4 ohm 120 lbs. 51 1/2”x22”x21” 1.8K
8 ohm 82 lbs. 33 1/2”x23”x23” N/A
4 ohm 47 lbs. 23”x46”x22 1/2” N/A