Genz Benz V-Fold, CMP 215H-VFold, CMP 118-VFold Owner's Manual

· When ever possible, avoid exposure to ex-

treme weather conditions such as direct in­tense sunlight, or sub-zero temperatures.

· Use a stiff bristle brush to remove dirt and

dust from carpeting.

· Only use a mild cleaners with a citrus or wa-

ter base to remove stains. Always test an
inconspicuous area for discoloration first.

· Never use solvents or lacquer base cleaners.

· Never expose any of the speaker compo-

nents to direct rain or liquids. If this occurs
stop using the equipment immediately and
contact a qualified repair consultant.

CARE & MAINTENANCE

WARNING:
Genz Benz enclosures are not designed to be suspended or
hung from any surface of the cabinet. This can only be
achieved with properly installed professional “flying hardware”
and installed by qualified rigging technician.

FOLD

COMPRESSION

SERIES

OWNER’S MANUAL

FEATURES:

·

Quality hand-built craftsmanship.

· Computer designed venting for precision per-

formance and durability

· Attractive and durable premium carpet.

· Black 16 gauge heavy duty perforated speaker

grills.

· Classic designs and appearance

· High quality speaker, tweeter and crossover

components.

· LTP—luminous tweeter protection, is designed

into all crossover to absorb excessive high fre­quency voltage.

Proudly manufactured in the U.S.A.

VFold Compression Series

This series of dynamic enclosures has been devel­oped for demanding and powerful performance in a
compact package. The VFold design projects power­ful low-frequency while the CMP 215H reproduces
smooth mids and seamless transition to the compres­sion horn. Standard features include: 5/8” plywood
construction, dense fiberboard baffles, high output
woofers, second-order crossovers w/ LTP protection,
black carpet, recessed handles and heavy duty round
perforated grills.

CROSSOVER CONNECTIONS

Use either input when connecting to the amp. The
second input is available for connecting to an addi­tional cabinet (daisy chaining).

VFold Compression Series

CMP 215H-VFold 600W/1200W 50-17K Hz 101 db

4

CMP 118-VFold 400W/800W 45-1.5K Hz 97 db

8

CAUTION: Never input a full-range signal to the Bi­amp inputs. When Bi-amping, the high frequency
minimum crossover point should be 1500 Hz @ 12db
per octave slope. Lowering the crossover point will
reduce the power handling of the horn.

SET UP TIPS

· Always survey the area you wish to cover with

your speaker system to make sure that your sys­tem is adequately matched for the venue.

· Use good judgment when placing your speakers

for audience coverage so that the speaker system
will disperse over your audience and not directly
at ear level. (Remember, high frequencies are
absorbed much easier by people, curtains and
other soft materials; while low frequencies are
not so easily absorbed)

· Always use good quality speaker cables and never

use guitar cables for hooking-up your speaker
system.

· Important: Always use caution when con-

necting speakers to an amplifier source. The
power amp should be off when making con­nections.

· Severe hearing loss is possible if subjected

to extended durations of high-output sound
levels.

· Always wear hearing protection whenever

possible.

ohm 85 lbs. 37”x201/2”x181/2” 2.5K Hz
ohm 70 lbs. 24”x22”x241/2” N/A