Please don't abandon the products as wastes at will.
It should be recycled and disposed separately. Thanks!
WL-06Dd1/2D Audio Doorphone For Villa
4.Cautions:
(1)
When you are going to install the door station's back cover, please pay attention
to the depth. The maximal depth is 12mm. Large interval between the door
station's panel outside and theiron door (or the wall) should be avoided.
(2)
Install the door station on fixed door that does not open by flush mounting.
(3)
Do not install the door station in direct rain or sunlight.
(4)
Installation height: between 140CM~160CM.
Contents
¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
1 System Introduction 1
2¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
Product Structure and Functions
¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
3 System Components and Parameters
4¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
System Diagram
¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
5 System Connection Diagram
6¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
Wire Material
¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
7 System Operations
¡ ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
8 Installation
1
2
3
3
4
4
5
7
1 System Introduction¡
1.One door station can be connected with 4 indoor phones.
2.The indoor phone hangs on the wall.
3.Full dupcex between door station & indoor phone.
4.Remote unlock.
2¡Product Structure and Functions
(2)Audio indoor phone:
Model
WL-06DFaD
DFbD06-WL
WL-06DFaH1
?DFbH06-WL
Size
20? 80 mm67¡ ¡
220¡85.6¡mm4? .5
Installation:
144.5mm
Door station
¨
WL-06DD1
WL-06DD2
Indoor phone
¨
2. £Door station (without rainproof) installation
¢Loudspeaker
7
¢
¢
¢
¢
¢
¢
¢
¢
Indoor phone voice comes out from
here
¢Indicator
7
Lights when calling
¢Microphone
7
Talk with indoor phone
¢Call Button
7
Press this button to call the indoor
phone
3. £Door station (without rainproof) installation
¢
¢
(1)Drill 2¡6mm holes in the wall according to door station size, fix the accessory plastic
and screws (§4.2 40mm) in the wall.
inflatable tube
(2)Fix the face cover and back cover together, fasten them with 2 M4 25 screws.
¢
¢
¢
¢
¢
¢
¢ Wall
¢ Door station's panel
¢ Door station's back cover
¢ 4¡25 Screws
¡
¡
¢
¢ Wall
¢ Door station's panel
¢ Door station's back cover
¢ 4¡25 Screws
¢
¢¡ ¡
button
¢
¢
¢
¢
7
Press this button to unlock the door
¢
Handset
7
Pick up handset for conversation
1
Drill a rectangular hole on proper position of the wall according to
(1)
door station installation size
(2)Drill 4¡5 holes in the rectangular slot according to door station
size, fix the accessory plastic and screws
(§4.2 40mm) in the slot.
(3)Fix the face cover and back cover together, fasten them with 2
M4 25 screws.
¡
¡
inflatable tube
6
3 System Components and Parameters¡
8 Installation¡
1.Instalation size£)
W1
90
1.2 Pick up the handset to talk to door station.
1.3 Unlock the door by pressing " " button during
conversation.
D1
L1=(L+26)
W2
W3
L3
L2=(L+24)
D2
1.
Door station
a) ¡10%Working Voltage: DC13V
b)Standby Current: ¡50mA
WL-06DD1 WL-06DD2
2.
Main indoor phone
WL-06DFaD WL-06DFaH1
3.
Accessory indoor phone
WL-06DFbD WL-06DFbH1
Adaptor
4.
c(Working Current: ¡200mA
a) ¡Working Voltage: DC15V 10%
b)Standby Current: None
c)Working Current: ¡10mA
a)Working Voltage: DC12V¡10%
b)Standby Current: None
c)Working Current: ¡10mA
Installation size on iron door Installation size on wall
(1)Installation size table for door station £
Model
WL-06DD1
WL-06DD2
Cover length
L(mm)
138
Door station
size(mm)
?74¡?30¡52
Installation size on
iron door (mm)
?66)?L(¡? 08)? W(¡38)? D( ?64)2L(¡?26)2W(¡42)2D(
5
Installation size on
wall (mm)
a) ¡Input Voltage: AC230V 10%
b)Output Voltage: DC15V/800mA
5.
PS-3E Tranformer
a) ¡Input Voltage: AC230V 10%
b)Output Voltage: DC15V/800mA
Note: Above ¡¡¡ partial explanation and input voltage, the Voltage can be set
according to different region countries.
¡
¡
2
4¡System Diagram
Two options
Adaptor & PS-3E
Adaptor
PS-3E
WL-06DFbH1
2
44 4 4
6(GND)
5(DC15V)
Two options
Adaptor & PS-3E
AC 220V input
Adaptor
AC
~
~
+DC-
Accessory
WL-06DFbH1 WL-06DFaD WL-06DFbD
Indoor phone
1(RING)
2(GND)
3(OUT)
4(IN)
1(RING)
2(GND)
3(OUT)
4(IN)
7(DC14V)
Main
Indoor phone
5 System Connection Diagram¡
Accessory
Indoor phone
Black
Red
Yellow
Green
Power
wire
Door station
Power
2
2
Black
Red
Yellow
Green
Blue
Main Indoor phone
Power
12V
+ -
Electrical lock
Two options
Adaptor & PS-3E
PS-3E
Adaptor
Electrical lock
+ -
Power
12V
+ -
SOUT
SIN
GND
POWER
101
101 SOUTSIN GNDPOWERGNDLK
Electrical lock
Door station
6 Wire Material¡
1.Wiring between door station and indoor phone: Within the distance of 50 meters, use
wire thicker than RVV5 0.4 multi-copper wire. Wire diameter should be adjusted
¡
according to wire distance.
2.The audio wire between door station and extra handset should be multi copper
wire ( RVV4 0.15 diameter).
¡ ¡
7 System Operations¡
The indoor phone will ring when the visitor press the
1.1
Call button on the door station
¡ ¡
101 SOUTSIN GNDPOWERLK- LK+
3
Door station
COM
4
Loading...