Genova Products Plumbing User Manual

Page 1
Page 2
June 2014
R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan Master Plumber, License No. 05275 (right)
In the late 1950’s, Robert F. Williams had the idea of utilizing plastics for plumbing systems that could be installed by individuals who may not possess any plumbing skills. As a result of the innovative idea came the creation of Genova.
Williams’ background as a licensed master
plastics. His extensive knowledge made him
eminently qualied to dispel the mysteries of
plumbing to the average homeowner. Williams’ goal was to make home plumbing something homeowners could easily do themselves.
Since that early beginning, complete lines of
Genova pipe and ttings have been developed by
the senior Willams and his son, R.M. Williams, current Genova chairman who is also a licensed master plumber.
Mr. Williams was able to see his goal achieved before he died in 1992. Vinyl plumbing is not only easy to install, but the pure virgin vinyl utilized in Genova products lasts longer and works better than other plumbing systems. The company has continued to diversify into other labor saving products, such as vinyl raingutters, fencing, decking, railing and lattice.
Genova has grown from the idea of a single entrepreneur into a dedicated group of people committed to serving the needs of do-it­yourselfers everywhere and those dealers who serve them. The corporate motto is “The People Who Get It Done!” and every employee is committed to the pursuit of that goal.
For do-it-yourselfers as well as pros, Genova is the only way to go in home plumbing and vinyl building materials.
Page 3
Page 4
100 Series
Solvents & Roof Flashings................................................................................................1
Polypropylene Tubular Products.......................................................................................5
300 Series
PVC Pressure Pipe & Fittings...........................................................................................9
Nipples............................................................................................................................12
PVC Sch. 40 Pressure Fittings.........................................................................................14
PVC Sch. 80 Pressure Fittings.........................................................................................25
350-380 Series
Plastic & Steel Insert Fittings...........................................................................................29
400 Series
PVC Sewer Pipe, PVC & Styrene Fittings......................................................................35
Corrugated Fittings.........................................................................................................42
500 Series
TABLE OF CONTENTS
CPVC Tubing & Fittings.................................................................................................45
Universal Fittings............................................................................................................55
Specialty Items for Use With CPVC..............................................................................60
600 Series
Sch. 30 PVC-DWV Pipe & Sch. 30 Fittings...................................................................61
Sch. 30 PVC-DWV Specialty Items................................................................................66
700 Series
Sch. 40 PVC-DWV Pipe & Fittings................................................................................67
Specialty Items For Use With Sch. 40............................................................................80
800 Series
ABS-DWV Pipe & Fittings.............................................................................................83
900 Series
Polyethylene Pipe...........................................................................................................94
Check Valves..................................................................................................................96
PVC Furniture Fittings.............................................................................................................97
Marine/RV Filter/Softener......................................................................................................99
Merchandising Aides...............................................................................................................102
Product Warranties.................................................................................................................104
Genova Products
iii
Page 5
Solvent welding is the most economical and safest way to install plumbing pipe
and ttings. Used to join ABS, CPVC, PVC, and Styrene.
All solvents come with daubers.
Genova is the only plumbing manufacturer that distributes its own brand of solvent cements.
SOLVENT CEMENT REQUIREMENTS
(Average # of Solvent Welded Joints)
100 SERIES
Material
NovaClean®
Cleaner/Primer
All Purpose Cement
NovaWeld® C
NovaWeld® P
Pipe/Fitting
Size
½” 63 255
¾” 42 170
1½” 17 68
2” 9 38
3” 7 30
4” 5 21
The above gures are estimates and will vary
with individual applications.
ArcticWeld® P
ABS Cement
¼ Pint Pint
Primer
Cement
One Step Clear
Professional Purple
One Step CPVC
SOLVENTS & ROOF FLASHINGS
Yellow Cement
ABS R R - - R R - - 255
CPVC R R R - - - R R 170
PVC R R - R - - R - 68
STYRENE R R - R R R - - 38
PEX/PB - - - - - - - - 30
NSF LISTED NO NO YES YES NO YES YES YES YES
ASTM NA F493 F493 D2564 D2564 D2235 F656 F493 F493
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
1
Page 6
PROFESSIONAL PURPLE PRIMER
ARCTICWELD® P CEMENT (COLD WEATHER)
Recommended for use with PVC and CPVC, in areas where a colored primer is required by local plumbing
100 SERIES
codes.
Part # Size
13110 ¼ Pint 4 oz. 12 4
13111 ½ Pint 8 oz. 10 6
13115 Pint 16 oz. 6 7
13120 Quart 32 oz. 4 9
Pkg
Qty
Box
Qty
Box
Wt
NOVACLEAN® CLEANER/PRIMER
Recommended for use with PVC, CPVC, ABS and Styrene. Also known as the “Universal” cleaner.
Part # Size
14010 ¼ Pint 4 oz. 12 4
14011 ½ Pint 8 oz. 10 6
14015 Pint 16 oz. 6 7
14020 Quart 32 oz. 4 9
Pkg
Qty
Box
Qty
Box
Wt
Recommended for use in freezing temperatures with PVC. Can be used on ABS.
Part # Size
14415 Pint 16 oz. 6 8
14420 Quart 32 oz. 4 10
Pkg
Qty
Box
Qty
Box
Wt
NOVAWELD® P CEMENT
Recommended for PVC and Styrene. Can be used on ABS.
Part # Size
14910 ¼ Pint 4 oz. 12 5
14911 ½ Pint 8 oz. 10 7
14915 Pint 16 oz. 6 8
14920 Quart 32 oz. 4 10
Pkg
Qty
Box
Qty
Box
Wt
NOVAWELD® C CEMENT (ORANGE)
Recommended for CPVC. Can be used on PVC, ABS and Styrene.
Part # Size
14110 ¼ Pint 4 oz. 12 5
14111 ½ Pint 8 oz. 10 7
14115 Pint 16 oz. 6 8
Pkg
Qty
Box
Qty
SOLVENTS & ROOF FLASHINGS
22
Recommended for solvent welding Chlorinated PVC.
Box
Wt
Genova Products
ONE STEP CLEAR CEMENT
Part # Size
15010C ¼ Pint 4 oz. 12 5
15011C ½ Pint 8 oz. 10 7
15015C Pint 16 oz. 6 8
Pkg
Qty
Box
Qty
Box
Wt
Page 7
ALL PURPOSE CEMENT
Recommended for solvent welding of CPVC, PVC, ABS or Styrene. Also known as the “Universal” cement.
Part # Size
15010 ¼ Pint 4 oz. 12 5 15011 ½ Pint 8 oz. 10 7 15015 Pint 16 oz. 6 8 15020 Quart 32 oz. 4 10
Pkg
Qty
Box
Qty
Box
Wt
UNCOPPER PRO® ONE STEP CPVC YELLOW
“SNAP-FIT®" THERMOPLASTIC ROOF
FLASHINGS
These weatherproof thermoplastic ashings,
featuring a replacement boot, provide seal around plumbing vent pipes. Manufactured totally from corrosion proof materials. They eliminate shingle staining problems. Can be used on all types of plumbing pipes and electrical conduit. Base dimensions (14661) 8½" X 11¾", (14562-64) 12" X 16".
Part # Size
14661 1¼” - 2” 10 5
14562 2” 10 9
14563 3” 10 9
14564 4” 10 9
Pkg
Qty
Box
Qty
Box
Wt
100 SERIES
Recommended for one-step solvent welding CPVC.
Part # Size
15210 ¼ Pint 4 oz. 12 5
15211 ½ Pint 8 oz. 10 7
15215 Pint 16 oz. 6 8
Pkg
Qty
Box
Qty
Box
Wt
ABS CEMENT
Recommended for use with ABS and Styrene.
Part # Size
16010 ¼ Pint 4 oz. 12 4
16011 ½ Pint 8 oz. 10 6
16015 Pint 16 oz. 6 7
16020 Quart 32 oz. 4 9
Pkg
Qty
Box
Qty
Box
Wt
SOLVENTS &ROOF FLASHINGS
Genova Products
33
Page 8
4
Page 9
Tubular products are made of polypropylene and are used for drainage applications
from the xture to the drain pipe.
100 SERIES
• Polypropylene is heat and chemical resistant and outperforms metal and plastic alternatives.
Install Tubular products using slip joints, do not solvent weld.
Use silicone sealant and plumber’s putty on all slip jamnut washer connections.
• All Tubular parts come merchandised in colored bags with installation instructions and bar code.
• Refer to the 700 and 800 series product lines for Sch. 40 PVC and ABS traps and trap adapters.
POLYPROPYLENE TUBULAR PRODUCTS
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
5
Page 10
FLANGED TAILPIECE
DISPOSER KIT
Attaches directly to sink strainers to extend drain tubes.
100 SERIES
Part # Size
186041 1½” x 1¼” 5 1
138061 1½” x 6” 5 1
138121 1½” x 12” 5 2
Pkg
Qty
Box
Qty
ADJUSTABLE TAILPIECE
Used to extend drain tubes, attaches directly to Tubular Tailpiece.
Part # Size
137501 1¼” x 6” 5 1
138501 1½” x 6” 5 1
138301 1½” x 12” 5 2
Pkg
Qty
Box
Qty
DISHWASHER TAILPIECE (INLET)
Box
Wt
Box
Wt
Fits any drain system. Designed to connect double compartment sinks that have a Garbage Disposal into a single trap. This unique unit can be assembled directly to
sink strainer and disposal. Features a bae in the tee to
prevent back ups.
Part # Size
138471 1½” x 15” 10 4
Pkg
Qty
Box
Qty
Box
Wt
BAFFLE TEE
Used to connect garbage disposal discharge into kitchen
sink drain, using the existing trap. Bae prevents disposer
discharge from backing up into the other sink.
Part # Size
186301 1½” 5 2
Pkg
Qty
Box
Qty
Box
Wt
SLIP COUPLER
Used for hooking up automatic dishwasher drains to exposed sink drains in installations not employing garbage disposal. Branch accepts 7/8" I.D. hose or rubber dishwasher drain connectors
Part # Size
138401 1½” x 8” x 7/8 5 2
Pkg
Qty
Box
Qty
Box
Wt
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Part # Size
138601 1½”/1¼” 5 1
DISHWASHER/DISPOSAL CONNECTOR W/
CLAMPS
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Allows for changes in direction and
Connects a dishwasher hose to drain inlet or disposal unit.
Part # Size
138451 1”/ 7/8” x 7/8”/ 5/8 5 2
POLYPROPYLENE TUBULAR PRODUCTS
Pkg
Qty
Box
Qty
Box
Wt
realignment of exposed tubular piping.
Part # Size
138701 1½”/1¼” 5 1
Pkg
Qty
90° SLIP COUPLER
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
6
Genova Products
Page 11
TEE SLIP COUPLER
SINK P-TRAP
100 SERIES
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects multiple sinks or vanities into a single drain.
Part # Size
138801 1½”/1¼” 5 2
Pkg
Qty
Box
Qty
Box
Wt
45° SLIP COUPLER
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Coupler allows for changes in direction and realignment of exposed tubular piping.
Part # Size
138901 1½”/1¼” 5 2
Pkg
Qty
Box
Qty
Box
Wt
WASHBASIN J-BEND
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects sink to DWV piping system.
Part # Size
175151 1½”/1¼” 5 2
Pkg
Qty
Box
Qty
Box
Wt
SINK P-TRAP W/TRANSITION ADAPTER
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects sink to DWV piping system.
Part # Size
175161 1½”/1¼” 25 10
Pkg
Qty
Box
Qty
Box
Wt
P-TRAP W/SOLVENT WELD ELBOW
POLYPROPYLENE TUBULAR PRODUCTS
Replaces conventional washbasin J-Bends.
Part # Size
171121 1¼” 5 1
Pkg
Qty
Box
Qty
Box
Wt
J-BEND
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Replaces conventional sink traps.
Part # Size
171161 1½”/1¼” 5 2
Pkg
Qty
Box
Qty
Box
Wt
WASHBASIN P-TRAP
Connects washbasin to DWV piping system.
Part # Size
175141 1¼” 10 3
Pkg
Qty
Box
Qty
Box
Wt
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Furnished with special PVC elbow to allow solvent welding directly to 1½" Sch. 40 pipe.
Part # Size
176151 1½” x 1½”/1¼” 5 2
Pkg
Qty
Box
Qty
Box
Wt
ANTI-SIPHON P-TRAP (BUILT IN VENT)
Combines the NovaVent™ anti-siphon valve and P-trap into a compact single unit. The anti-siphon trap provides a simple way of solving waste pipe drainage problems caused by inadequate plumbing system venting. Replaces
almost any current xture trap.
Part # Size
178151 1½” 10 6
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
7
Page 12
S-TRAP
Used in kitchen sink and washbasin applications where
plumbing connection is made at oor. Adaptable 1½” x
1¼” washer included in P/N 177151. Can be utilized to
100 SERIES
connect 1½” tubes, 1¼” tubes, as well as adapt from 1½” to 1¼” tubes.
Part # Size
177141
177151
1¼”
1½” x 1¼”
Pkg
Qty
Box Qty
5 3
5 4
Box
Wt
BATHTUB TRIP LEVER WASTE
Made of heavy-duty PVC with chrome plated face plate
and strainer. Easy to Install, it adjusts to any standard size
bathtub.
Part # Size
19015 1½” 1 2
Pkg.
Qty
Box
Qty
Box
Wt
PVC DYNAMIC DUO™ TRAP ADAPTER
END OPENING CONTINUOUS WASTE
(ADJUSTABLE - DIRECT CONNECT)
Connects double compartment sinks into a single trap located to one side under the sink. Can be assembled directly to sink strainers or tailpiece pipes. Features a
removable bae.
Part # Size
186001 1½” 5 3
Pkg
Qty
Box
Qty
Box
Wt
CENTER OPENING CONTINUOUS WASTE
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Solvent welds to 1½" Sch.40 drain pipe
and connects via slip jamnut to either 1½" or 1¼" tubular
traps. Eliminates the need for stocking extra trap adapter
congurations.
Part # Size
722151 1½” x 1¼” /1½” 5 1
Pkg
Qty
Box
Qty
Box
Wt
SLIP JAMNUT
Interchanges with metal or plastic jamnuts. Special design
allows tightening without tools.
Part # Size
147141 1¼” 10 1
147151 1½” 10 1
Pkg
Qty
Box
Qty
Box
Wt
ASSORTED SLIP WASHERS
Connects double compartment sinks into a single trap located in the center under the sink. Connects directly to sink strainers or tailpiece pipes.
Part # Size
186101 1½” 5 3
Pkg
Qty
Box
Qty.
Box
Wt.
Ideal for sealing applications when used with slip jamnuts.
Package assortment includes: (2) - 1½" x 1¼" Reducing Washers, (2) - 1½" Slip washers, and (2) - 1¼" Slip Washers.
Part # Size
POLYPROPYLENE TUBULAR PRODUCTS
8
Genova Products
148001 10 1
Pkg
Qty
Box
Qty
Box
Wt
Page 13
PVC Pressure Pipe & Fittings are used in cold water pressure applications. Schedule 40 is used in applications, such as irrigation, underground residential sprinkler systems, water service pipe, deionized water lines, swimming pool
installations, and some chemical drainage systems. Sch. 80 ttings are used
with chemical processing, industrial plating, chilled water distribution, chemical
drainage, and other high pressure uid applications.
300 SERIES
Pressure Pipe
SDR Pipe meets ASTM D2241
Sch. 40 PVC Pipe meets ASTM D1785
Sch. 80 PVC Pipe meets ASTM D1785
Sch. 40 PVC Pipe 1½" and larger is dual rated for pressure (ASTM 1785) and drainage (ASTM 2665) applications.
Belled pipe ends meet ASTM D2672 (Pipe measures 20' before belling)
NSF Listed (except class rated pipe)
Sch. 40 Pressure Fittings
Meets ASTM D2466
NSF Listed
Sch. 80 Pressure Fittings
Meets ASTM D2467
NSF Listed
• Pipe diameters are the same as iron pipe. (IPS = Iron Pipe Size)
Solvent weld joints.
Pressure pipe and ttings are for use in the distribution of pressurized uids
PVC PRESSURE PIPE & FITTINGS
only, which are chemically compatible with the piping materials.
• Pipe produced to a Standard Dimensional Ratio (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating; the pressure rating for Schedule pipe decreases as the diameter increases.
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
9
Page 14
PVC PRESSURE PIPE
(SCH.40 AND SDR)
(Cold Water Use Only)
300 SERIESPVC PRESSURE PIPE
Part # Size
30005 ½” x 20’ (SDR 13.5) Belled End 315 10 240 21
31005 ½” x 10’ (SDR 13.5) Plain End 315 10 480 11
30007 ¾” x 20’ (SDR 21) Belled End 200 10 200 26
31007 ¾” x 10’ (SDR 21) Plain End 200 10 400 13
30010 1” x 20” (SDR 21) Belled End 200 10 240 34
31010 1” x 10’ (SDR 21) Plain End 200 10 240 17
30011 1¼” x 20’ (SDR 21) Belled End 200 5 180 26
31011 1¼” x 10’ (SDR 21) Plain End 200 5 180 13
30012 1½” x 20’ (SDR 21) Belled End 200 5 200 34
31012 1½” x 10’ (SDR 21) Plain End 200 5 200 17
30022 2” x 20’ (SDR 21) Belled End 200 5 150 53
31022 2” x 10’ (SDR 21) Plain End 200 5 150 27
300057 ½” x 20’ (Sch. 40) Belled End 600 10 240 33
310057 ½” x 10’ (Sch. 40) Plain End 600 10 480 17
300058 ½” x 20’ (Sch. 40) Plain End 600 10 240 33
300077 ¾” x 20’ (Sch. 40) Belled End 480 10 200 43
310077 ¾” x 10’ (Sch. 40) Plain End 480 10 400 22
300078 ¾” x 20’ (Sch. 40) Plain End 480 10 200 43
300107 1” x 20’ (Sch. 40) Belled End 450 10 240 65
310107 1” x 10’ (Sch. 40) Plain End 450 10 240 33
300108 1” x 20’ (Sch. 40) Plain End 450 10 240 65
300117 1¼” x 20’ (Sch. 40) Belled End 370 5 180 44
310117 1¼” x 10’ (Sch. 40) Plain End 370 5 180 22
300118 1¼” x 20’ (Sch. 40) Plain End 370 5 180 44
300127 1½” x 20’ (Sch.40) Belled End 330 5 200 54
70011 1½” x 10’ (Sch. 40) Plain End 330 5 180 27
300227 2” x 20’ (Sch. 40) Belled End 280 5 150 73
70021 2” x 10’ (Sch. 40) Plain End 280 5 140 35
310257 2½” x 10’ (Sch. 40) Plain End 300 5 150 56
300257 2½” x 20’ (Sch. 40) Belled End 300 5 75 111
34011 1¼” x 20’ (SDR 26) Belled End 160 5 180 21
35011 1¼” x 10’ (SDR 26) Plain End 160 5 180 11
34012 1½” x 20’ (SDR 26) Belled End 160 5 200 28
35012 1½” x 10’ (SDR 26) Plain End 160 5 200 14
34022 2” x 20’ (SDR 26) Belled End 160 5 150 43
34032 3” x 20’ (SDR 26) Belled End 160 5 75 93
34042 4” x 20’ (SDR 26) Belled End 160 5 40 146
35022 2” x 10’ (SDR 26) Plain End 160 5 150 22
33010 1” x 10’ (Class 125) Plain End 125 10 240 12
33011 1¼” x 10’ (Class 125) Plain End 125 5 180 11
32012 1½” x 20’ (Class 125) Belled End 125 5 200 25
33012 1½” x 10’ (Class 125) Plain End 125 5 200 13
32022 2” x 20’ (Class 125) Belled End 125 5 150 38
33022 2” x 10’ (Class 125) Plain End 125 5 150 19
Pressure
Rating at
73°F (PSI)
Bdl Qty
(lgths)
Box
Qty
(lgths)
Bdl
Wt
(lbs)
10
Genova Products
Page 15
PURPLE RECLAIMED WATER PIPE
300 SERIES
Pressure
Part # Size
300077R ¾” x 20’ (Sch. 40) Belled End 480 10 200 43
300107R 1” x 20’ (Sch. 40) Belled End 450 10 240 65
Rating at
73°F (PSI)
Bdl Qty
(lgths)
Box
Qty
(lgths)
Bdl
Wt
(lbs)
Genova Products
PVC PRESSURE PIPE
11
Page 16
SCH. 80 NIPPLES (MIP X MIP)
300 SERIESNIPPLES
Used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. PTFE
thread tape is recommended for threaded joints.
Part # Size
383001 ½” X 1³/8” (C) 10 50 2
3403015 ½” X 1½” (S) 50 2
383020 ½” x 2” 10 50 2
3403025 ½” x 2½” 50 2
3403030 ½” x 3” 50 3
3403035 ½” x 3½” 50 3
3403040 ½” x 4” 50 4
3403045 ½” x 4½” 50 4
3403050 ½” x 5” 25 3
383060 ½” x 6” 10 50 6
3403080 ½” x 8” 25 4
3403100 ½” x 10” 25 5
383120 ½” x 12” 10 50 11
3403180 ½” x 18” 25 8
3403240 ½” x 24” 10 5
3403360 ½” x 36” 10 6
3403480 ½” x 48” 10 8
384001 ¾” x 1³/
384020 ¾” x 2” 10 50 3
3404025 ¾” x 2½” 50 3
3404030 ¾” x 3” 50 4
384040 ¾” x 4” 10 50 6
3404050 ¾” x 5” 25 3
384060 ¾” x 6” 10 50 8
3404080 ¾” x 8” 25 5
3404100 ¾” x 10” 25 6
384120 ¾” x 12” 10 50 17
3404180 ¾” x 18” 10 6
3404240 ¾” x 24” 10 7
3404360 ¾” x 36” 10 10
3404480 ¾” x 48” 10 12
8” (C) 10 50 2
Pkg
Qty
Box
Qty
Box
Wt
(Continued.....)
Part # Size
3405001 1” x 1½” (C) 50 3
3405020 1” x 2” (S) 50 4
3405030 1” x 3” 50 5
3405040 1” x 4” 25 4
3405050 1” x 5” 25 5
3405060 1” x 6” 25 6
3405080 1” x 8” 25 7
3405100 1” x 10” 25 8
3405120 1” x 12” 25 10
3406001 1¼” x 1-5/8” (C) 25 3
3406020 1¼” x 2” (S) 25 3
3406025 1¼” x 2½” 25 3
3406030 1¼” x 3” 25 4
3406040 1¼” x 4” 25 5
3406050 1¼” x 5” 25 12
3406060 1¼” x 6” 25 8
3406080 1¼” x 8” 25 10
3406100 1¼” x 10” 20 10
3406120 1¼" x 12” 20 12
3407001 1½" x 1¾" (C) 25 3
3407020 1½" x 2” (S) 25 4
3407025 1½" x 2½" 25 4
3407030 1½" x 3” 25 5
3407040 1½" x 4” 25 7
3407050 1½" x 5” 25 9
3407060 1½” x 6” 25 9
3407080 1½" x 8” 25 13
3407100 1½” x 10” 15 9
3407120 1½" x 12” 15 11
3408001 2” x 2”(C) 25 5
3408025 2” x 2½” (S) 25 6
3408030 2” x 3” 25 7
3408040 2” x 4” 25 9
3408050 2” x 5” 25 12
3408060 2” x 6” 25 13
3408080 2” x 8” 25 17
3408100 2” x 10” 10 8
3408120 2” x 12” 10 10
Pkg
Qty
Box
Qty
Box
Wt
12
(Continued.....)
(C) = Close (S) = Short
Genova Products
Page 17
PE NIPPLES (MIP X MIP)
300 SERIES
Part # Size
3303020 ½” x 2” 10 50 1
3303030 ½” x 3” 10 250 7
3303040 ½” x 4” 10 250 11
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
NIPPLES
13
Page 18
COUPLING (SLIP X SLIP)
REDUCING COUPLING (SLIP X SLIP)
Used to join lengths of pipe.
Part # Size
300 SERIES
30105 ½” 25 600 25
30107 ¾” 25 300 14
30110 1” 10 300 22
30114 1¼” 25 150 15
30115 1½” 10 120 17
30120 2” 10 50 11
30190 2½” 10 6
30130 3” 10 8
30140 4” 5 6
30160 6” 5 13
Pkg
Qty
Box
Qty
COUPLING (SLIP X SLIP)CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
30105CP ½” 50 17
30107CP ¾” 25 12
30110CP 1” 10 8
EXTENDED SOCKET COUPLING (SLIP X SLIP)
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Used to reduce or increase pipe sizes.
Part # Size
30175 ¾” x ½” 50 3
30117 1 x ¾” 50 5
Pkg
Qty
Box
Qty
Box
Wt
REPAIR COUPLING (NO STOP) (HUB X HUB)
Furnished without center stop so that stationary lengths of pipe can be spliced together.
Part # Size
30102 ½” 10 100 4
30103 ¾” 10 50 3
30111 1” 10 50 4
30113 1¼” 10 1
30116 1½” 5 10 2
30122 2” 5 10 2
Pkg
Qty
Box
Qty
Box
Wt
THREADED COUPLING (FIP X FIP)
Used to join lengths of pipe.
Part # Size
E30105
E30107
E30110
E30114
E30115
PVC SCH. 40 PRESSURE FITTINGS
E30120
½”
¾”
1”
1¼”
1½”
2”
Pkg
Qty
25 600 24
25 300 17
10 300 23
14
Box Qty
Box
Wt
25 4
25 4
25 6
Genova Products
Used for joining sections of threaded pipe and/or nipples. PTFE thread tape is recommended for threaded joints.
Part # Size
30125 ½” 10 400 19
30127 ¾” 10 300 21
30128 1” 10 300 31
Pkg
Qty
Box
Qty
Box
Wt
Page 19
CAP (SLIP)
CAP (FIP)
300 SERIES
Used to cap pipe. * Caps are designed with dome shaped top.
Part # Size
30155 ½” 10 600 15
30157 ¾” 10 600 20
30158 1” 10 300 18
30159 1¼” 25 300 25
30151 1½” 10 120 14
30152 2” 10 120 20
30150* 2½” 10 4
30153* 3” 10 6
30154* 4” 5 5
30156* 6” 5 11
Pkg
Qty
Box
Qty
Box
Wt
Used to cap threaded pipe. Adapts to standard male pipe threads. PTFE thread tape is recommended for threaded
joints.
* Caps are designed with dome shaped top.
Part # Size
30165 ½” 10 600 17
30167 ¾” 10 400 15
30168 1” 10 300 20
30169 1¼” 25 150 15
30161 1½” 25 150 20
30162 2” 10 50 11
30163* 3” 10 6
30166* 4” 5 4
Pkg
Qty
Box
Qty
Box
Wt
PLUG (MIP)
CAP (SLIP)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
30155CP ½” 60 15
30157CP ¾” 60 20
30158CP 1” 10 7
Pkg
Qty
Box
Qty
Box
Wt
Adapts to standard female pipe threads. PTFE thread tape
is recommended for threaded joints.
Part # Size
31805 ½” 10 400 11
31807 ¾” 10 400 16
31810 1” 10 400 24
31814 1¼” 25 3
31815 1½” 25 3
31820 2” 10 2
31890 2½” 10 3
31829 3” 10 5
31839 4” 5 4
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
Genova Products
15
Page 20
PLUG (SPIGOT)
(Reducing Bushing Continued.....)
Solvent welds directly into tting socket to form permanent
closure.
300 SERIES
Part # Size
31825 ½” 10 300 9
31827 ¾” 10 300 9
31830 1” 10 200 12
31834 1¼” 25 3
31835 1½” 25 3
31840 2” 10 2
31845 2½” 10 4
31850 3” 10 5
31860 4” 5 4
Pkg
Qty
Box
Qty
Box
Wt
REDUCING BUSHING (SPIGOT X SLIP)
Inserts into tting hub to reduce to smaller pipe size.
Part # Size
30275 ¾” x ½” 10 400 11
30215 1” x ½” 10 400 20
30217 1” x ¾” 10 400 16
30245 1¼” x ½” 25 3
30247 1¼” x ¾” 25 300 27
30240 1¼” x 1” 25 300 19
30255 1½” x ½” 25 3
30257 1½” x ¾” 10 120 15
30250 1½” x 1” 10 120 14
30254 1½” x 1¼” 10 120 9
30225 2” x ½” 10 2
30227 2” x ¾” 10 2
30220 2” x 1” 10 120 23
30224 2” x 1¼” 10 120 22
30221 2” x 1½” 10 120 17
30290 2½” x 1” 10 4
30291 2½” x 1½” 10 4
PVC SCH. 40 PRESSURE FITTINGS
30292 2½” x 2” 10 3
Pkg
Qty
Box
Qty
Box
Wt
Part # Size
30230 3" x 1" 10 5
30234 3” x 1¼” 10 5
30231 3” x 1½” 10 5 30232 3” x 2” 10 5
30239 3” x 2½” 10 5
30242 4” x 2” 5 4
30249 4” x 2½” 5 5
30243 4” x 3” 5 4
30264 6” x 4” 5 9
Pkg
Qty
Box
Qty
Box
Wt
REDUCING BUSHING (MIP X FIP)
Inserts into threaded tting socket to reduce to smaller
threaded opening. PTFE thread tape is recommended for
threaded joints.
Part # Size
34351 ½” x ¼” 50 2
34375 ¾” x ½” 10 300 8
34315 1” x ½” 10 200 10
34317 1” x ¾” 10 200 8
34345 1¼” x ½” 25 4
34347 1¼” x ¾” 25 3
34340 1¼” x 1” 25 3
34355 1½” x ½” 25 4
34357 1½” x ¾” 25 3
34350 1½” x 1” 25 3
34354 1½” x 1¼” 25 2
34320 2” x 1” 10 3
34324 2” x 1¼” 10 2
34321 2” x 1½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
16
(Continued.....)
Genova Products
Page 21
REDUCING BUSHING (SPIGOT X FIP)
FEMALE ADAPTER (SLIP X FIP)
300 SERIES
Inserts into tting hub to reduce to standard male pipe
threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
34259 ½” x ¹/8” 100 3
34251 ½” x ¼” 100 3
34275 ¾” x ½” 10 400 14
34215 1” x ½” 10 400 22
34217 1” x ¾” 10 400 18
34245 1¼” x ½” 25 4
34247 1¼” x ¾” 25 3
34240 1¼” x 1” 25 3
34255 1½” x ½” 25 3
34257 1½” x ¾” 25 4
34250 1½” x 1” 25 4
34254 1½” x 1¼” 25 3
34225 2” x ½” 10 2
34227 2” x ¾” 10 3
34220 2” x 1” 10 3
34224 2” x 1¼” 10 2
34221 2” x 1½” 10 2
34291 2½” x 1½” 10 4
34292 2½” x 2” 10 3
34232 3” x 2” 10 5
34239 3” x 2½” 10 5
34249 4” x 2½” 5 5
Pkg
Qty
Box
Qty
Box
Wt
Adapts pressure pipe to standard male pipe threads. PTFE
thread tape is recommended for threaded joints.
Part # Size
30305 ½” 10 500 18
30307 ¾” 10 300 14
30310 1” 10 300 25
30314 1¼” 25 150 17
30315 1½” 10 120 19
30320 2” 10 50 11
30390 2½” 10 6
30330 3” 10 8
30340 4” 5 5
30360 6” 4 10
Pkg.
Qty.
Box
Qty
Box
Wt
REDUCING FEMALE ADAPTER
(SLIP X FIP)
Adapts pressure pipe to standard male pipe threads. Fitting reduces to smaller pipe size. PTFE thread tape is
recommended for threaded joints.
PVC SCH. 40 PRESSURE FITTINGS
FEMALE ADAPTER (SLIP X FIP)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
30305CP ½” 50 18
30307CP ¾” 25 12
30310CP 1” 10 9
Pkg
Qty
Box
Qty
Part # Size
30357 ½” x ¾” 50 3
30375 ¾” x ½” 10 150 8
30376 ¾” x 1” 50 4
30377 1” x ¾” 50 4
Box
Wt
Genova Products
Pkg
Qty
Box
Qty
Box
Wt
17
Page 22
MALE ADAPTER (SLIP X MIP)
45° ELBOW (SLIP X SLIP)
Adapts pressure pipe to standard female pipe threads.
PTFE thread tape is recommended for threaded joints.
300 SERIES
Part # Size
Pkg
Qty
Box
Qty
Box
Wt
30405 ½” 10 500 16
30407 ¾” 10 300 13
30410 1” 10 300 22
30414 1¼” 25 150 16
30415 1½” 10 120 16
30420 2” 10 50 10
30490 2½” 10 5
30430 3” 10 6
30440 4” 5 5
30460 6” 4 10
MALE ADAPTER (SLIP X MIP)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
30405CP
30407CP
30410CP
Pkg.
Qty.
½”
¾”
1”
Box
Qty
50 16
25 11
10 8
Box
Wt
REDUCING MALE ADAPTER (SLIP X MIP)
Adapts pressure pipe to standard female pipe threads.
PTFE thread tape is recommended for threaded joints.
Part # Size
Pkg
Qty
30457 ½” x ¾” 10 150 7
30475 ¾” x ½” 10 300 12
30476 ¾” x 1” 10 100 8
30477 1” x ¾” 50 4
30441 1” x 1¼” 25 3
30404 1¼” x 1” 25 3
30454 1¼” x 1½” 25 4
30452 1½” x 1¼” 25 4
PVC SCH. 40 PRESSURE FITTINGS
30421 1½” x 2” 10 2
18
30412 2” x 1½” 10 2
Box
Qty
Box
Wt
Genova Products
Used to change direction in piping.
Part # Size
Pkg
Qty
Box
Qty
Box
Wt
30605 ½” 10 300 12
30607 ¾” 10 300 18
30610 1” 10 200 19
30614 1¼” 10 120 17
30615 1½” 10 50 11
30620 2” 5 50 15
30690 2½” 10 8
30630 3” 10 10
30640 4” 5 8
30660 6” 4 18
90° ELBOW (SLIP X SLIP)
Used to change direction in piping.
Part # Size
30705
30707
30710
30714
30715
30720
30790
30730
30740
30760
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
6”
Pkg
Qty
10 300 18
10 250 21
10 120 17
10 50 11
10 50 15
5 50 23
Box Qty
10 10
10 14
5 10
4 22
Box
Wt
90° ELBOW (SLIP X SLIP) CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
30705CP
30707CP
30710CP
Pkg
Qty
½”
¾”
1”
Box Qty
50 29
20 17
10 15
Box
Wt
Page 23
REDUCING 90° ELBOW (SLIP X SLIP)
90° STREET ELBOW (SLIP X MIP)
300 SERIES
Used to change direction in piping. Fitting reduces to smaller pipe size.
Part # Size
30775 ¾” x ½” 10 100 8
30716 1” x ½” 50 5
30717 1” x ¾” 50 6
30741 1¼” x 1” 25 5
30750 1½” x 1” 25 8
Pkg
Qty
Box
Qty
Box
Wt
90° STREET ELBOW (MIP X FIP)
Adapts standard female pipe threads to standard male pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
32705 ½” 50 5
32707 ¾” 50 5
32715 1½” 25 9
32720 2” 10 6
Pkg
Qty
Box Qty.
Box
Wt
Used to change direction in piping. Adapts to standard female pipe threads. PTFE thread tape is recommended
for threaded joints.
Part # Size
32805 ½” 50 3
32807 ¾” 50 4
32810 1” 50 7
32814 1¼“ 25 6
32815 1½” 25 7
32820 2” 10 5
Pkg
Qty
Box
Qty
Box
Wt
90° STREET ELBOW (SLIP X SPIGOT)
Used to change direction in piping.
Part # Size
32905 ½” 50 3
32907 ¾” 50 4
32910 1” 10 50 7
32914 1¼“ 25 5
32915 1½” 25 8
32920 2” 10 5
Pkg
Qty
BoxQyBox
Wt
PVC SCH. 40 PRESSURE FITTINGS
90° STREET ELBOW (MIP X FIP)
Adapts to standard female pipe threads to standard male pipe threads. These elbows are made of Marlex. PTFE
thread tape is recommended for threaded joints
Part # Size
M32705 ½” 50 3
M32707 ¾” 50 3
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
90° THREADED ELBOW (FIP X
FIP)
Used to change direction in piping. Adapts to standard male pipe threads. PTFE thread tape is recommended for
threaded joints.
Part # Size
33705 ½” 10 200 16
33707 ¾” 10 100 11
33710 1” 10 100 18
33714 1¼“ 25 8
Pkg
Qty
Box
Qty
Box
Wt
19
Page 24
90° FEMALE ELBOW (SLIP X FIP)
Used to change direction in piping. Adapts from solvent welded line to standard male pipe threads. PTFE thread
tape is recommended for threaded joints.
300 SERIES
Part # Size
33905 ½” 10 300 20
33907 ¾” 10 300 25
33910 1” 10 120 17
33914 1¼“ 10 120 27
33915 1½” 10 50 16
33920 2” 5 50 25
33990 2½” 10 15
33940 4” 5 10
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW W/FEMALE SIDE INLET
(SLIP X SLIP X FIP)
Commonly used to connect threaded sprinkler risers to underground systems. Fitting reduces to a smaller pipe size. Adapts to standard male pipe threads. PTFE thread
tape is recommended for threaded joints.
Part # Size
33175 ¾” x ¾” x ½” 10 50 5
33176 1” x 1” x ½” 25 3
Pkg
Qty
Box
Qty
Box
Wt
TEE (SLIP X SLIP X SLIP)
REDUCING 90° FEMALE ELBOW (SLIP X FIP)
Used to change direction in piping. Adapts from solvent welded line to standard male pipe threads. PTFE thread
tape is recommended for threaded joints.
Part # Size
34157 ½” x ¾” 50 4
34175 ¾” x ½” 10 300 22
34115 1” x ½” 10 50 6
34117 1“ x ¾” 10 100 13
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW W/FEMALE SIDE INLET
(SLIP X SLIP X FIP)
Used to provide a branch supply line from a main line.
Part # Size
31405 ½” 10 300 22
31407 ¾” 10 300 31
31410 1” 10 120 19
31414 1¼“ 10 120 30
31415 1½” 10 50 19
31420 2” 10 50 27
31450 2½” 10 12
31430 3” 10 16
31440 4” 5 13
31446 6” 4 29
Pkg
Qty
Box
Qty
Box
Wt
TEE (SLIP X SLIP X SLIP) CONTRACTOR PACK
Commonly used to connect threaded sprinkler risers to underground systems. Fitting reduces to a smaller pipe size. Adapts to standard male pipe threads. PTFE thread
tape is recommended for threaded joints.
Part # Size
33105 ½” 50 4
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
20
Genova Products
Conveniently packaged in quantities of 10.
Part # Size
31405CP ½” 25 19
31407CP ¾” 25 24
31410CP 1” 10 16
Pkg
Qty
Box
Qty
Box
Wt
Page 25
REDUCING TEE (SLIP X SLIP X SLIP)
FEMALE TEE (SLIP X SLIP X FIP)
300 SERIES
Used to provide a branch supply line from a main line. Fitting reduces to a smaller pipe size.
Part # Size
31403 ½” x ½” x ¾” 50 4
31421 ¾” x ½” x ½” 50 5
31471 ¾” x ¾” x ½” 10 150 13
31476 ¾" x ½" x ¾" 50 5
31406 ¾" x ¾" x 1" 50 7
31475 1” x 1" x ½" 10 50 7
31411 1" x ½” x 1" 50 7
31477 1" x 1" x ¾” 10 120 18
31409 1” x 1” x 1½" 25 8
31490 1¼” x 1¼" x ½” 25 6
31491 1¼” x 1¼” x ¾” 25 6
31474 1¼” x 1¼” x 1" 10 50 12
31493 1½" x 1½” x ½” 25 6
31494 1½" x 1½” x ¾” 25 7
31495 1½" x 1½" x 1" 25 8
31419 1½" x 1½” x 1¼” 25 8
31492 1½” x 1½” x 2” 10 5
31433 2” x 2” x ½” 10 4
31434 2" x 2” x ¾” 10 4
31435 2” x 2” x 1” 10 4
31436 2” x 2” x 1¼” 10 4
31472 2” x 2” x 1½" 10 5
31423 3” x 3” x 2” 10 12
31442 4” x 4” x 2” 5 8
31443 6” x 6” x 3” 5 21
31449 6” x 6” x 4” 5 24
Pkg
Qty
Box
Qty
Box
Wt
Solvent welds into main line to provide a threaded branch line of the same size. PTFE thread tape is recommended
for threaded joints.
Part # Size
31455 ½” 10 300 23
31457 ¾” 10 300 30
31458 1" 10 100 19
31454 1¼" 25 8
31451 1½" 25 11
31452 2" 10 8
Pkg
Qty
Box
Qty
Box
Wt
REDUCING FEMALE TEE (SLIP X SLIP X FIP)
Solvent welds into main line to provide a threaded branch line of reduced size. PTFE thread tape is recommended
for threaded joints.
Part # Size
31448 ½" x ½" x ¹/8” 50 4
31481 ¾" x ¾" x ½" 10 150 15
31485 1" x 1" x ½" 10 120 18
31487 1" x 1" x ¾" 10 120 19
31460 1¼" x 1" x 1" 25 8
31480 1¼"x 1¼" x ½” 25 6
31488 1¼" x 1¼” x ¾" 25 6
31484 1¼" x 1¼" x 1 25 7
31469 1½" x 1¼" x ¾" 25 9
31470 1½" x 1¼" x 1” 25 7
31478 1½" x 1½" x ½" 25 7
31479 1½" x 1½" x ¾" 25 6
31489 1½" x 1½" x 1" 25 8
31482 2" x 2" x ½” 10 4
31496 2” x 2” x ¾” 10 4
31497 2” x 2” x 1” 10 4
31499 2” x 2” x 1½” 10 6
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
Genova Products
21
Page 26
FEMALE TEE (FIP X FIP X FIP)
UNION (FIP X FIP)
Adapts to male threaded main line to provide a threaded branch line of the same size. PTFE thread tape is
recommended for threaded joints.
300 SERIES
Part # Size
35455 ½” 10 100 9
35457 ¾” 10 100 13
35458 1" 10 100 22
Pkg QTY
Box
Qty
CROSS (ALL SLIP)
Used to connect like size lateral piping.
Part # Size
34405 ½” 10 50 5
34407 ¾” 10 50 6
34410 1” 10 50 10
34414 1¼“ 25 9
34415 1½” 25 12
34420 2” 10 7
34430 3” 10 19
34440 4” 5 15
Pkg
Qty
Box
Qty
Box
UNION (SLIP X SLIP)
Wt
Box
Wt
This union joins to male threaded pipe and provides a
method for future disassembly of piping without cutting.
PTFE thread tape is recommended for threaded joints.
Working Pressure: 150 PSI @ 73°
Part # Size
37505 ½” 12 3
37507 ¾” 12 4
37510 1” 12 5
37514 1¼“ 6 3
37515 1½” 6 4
37520 2” 6 8
Pkg
Qty
Box
Qty
Box
Wt
COMPRESSION COUPLING (COMP. X COMP.)
Commonly referred to as a “dresser coupling” this tting is used to join two pieces of PVC or other iron pipe sized
pipe in cold water applications. Most often used for in-line repairs.
Part # Size
37105 ½” 20 6
37107 ¾” 20 7
37110 1” 20 9
37114 1¼“ 10 7
37115 1½” 10 9
37120 2” 10 12
Pkg
Qty
Box
Qty
Box
Wt
This union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working Pressure: 150 PSI @ 73°
Part # Size
37205 ½” 10 20 3
37207 ¾” 10 20 6
37210 1” 10 4
37214 1¼“ 5 10 8
37215 1½” 5 10 6
37220 2” 5 10 9
Pkg
Qty
Box
Qty.
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
22
Genova Products
COMPRESSION MALE ADAPTER
(COMP. X MIP)
Adapts PVC or other iron pipe sized pipe in cold water applications to standard female pipe threads. PTFE thread
tape is recommended for threaded joints.
Part # Size
37607 ¾” 6 1
37610 1" 6 2
Pkg
Qty
Box
Qty
Box
Wt
Page 27
COMPRESSION TEE W/FIP BRANCH
(COMP. X COMP. X FIP)
Provides a threaded branch line from a main line. Adapts PVC pipe or other iron pipe sized pipe to male pipe threads in cold water applications. PTFE thread tape is
recommended for threaded joints.
Part # Size
37705 ½” 24 7
37707 ¾” 12 5
37710 1” 12 7
37775 ¾" x ¾" x ½” 12 5
Pkg
Qty
Box
Qty
Box
Wt
RISER EXTENDER (FIP X MIP)
BALL VALVE (FIP X FIP)
These ball valves are made out of PVC for corrosion
resistance. Used anywhere a full ow valve is required,
such as swimming pools, irrigation systems or agricultural applications. Adapts to standard male pipe threads. PTFE
thread tape is recommended for threaded joints.
Working Pressure: 150 PSI @ 73°
Part # Size
37405 ½” 10 2
37407 ¾” 10 4
37410 1” 10 6
37414 1¼“ 10 7
37415 1½” 4 4
37420 2” 4 7
Pkg
Qty
Box
Qty
Box
Wt
300 SERIES
Used to extend sprinkler risers. May be used in initial installation or for replacement purposes. PTFE thread
tape is recommended for threaded joints.
Part # Size
34505 ½” 50 3
34507 ¾" 50 3
Pkg
Qty
Box
Qty
Box
Wt
BALL VALVE (SLIP X SLIP)
These ball valves are made out of PVC for corrosion
resistance. Used anywhere a full ow valve is required,
such as swimming pools, irrigation systems or agricultural applications. Working Pressure: 150 PSI @ 73°
Part # Size
37305 ½” 10 2
37307 ¾” 10 4
37310 1” 10 5
37314 1¼“ 10 7
37315 1½” 4 4
37320 2” 4 7
Pkg
Qty
Box
Qty
Box
Wt
GLOBE VALVE (SLIP X SLIP)
This valve employs the globe valve principle, for use in cold water systems only.
Part # Size
37805 ½” 12 3
37807 ¾” 12 3
Pkg
Qty
Box
Qty
Box
Wt
RUNNING TRAP (SPIGOT X SPIGOT)
Used for common air conditioner condensation drains in a horizontal application.
Part # Size
38007 ¾” 10 120 27
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
Genova Products
23
Page 28
P-TRAP (SPIGOT X SPIGOT)
Used for common air conditioner condensation drains in a vertical application.
300 SERIES
Part # Size
38507 ¾” 10 120 27
POLYETHYLENE CUTOFF NIPPLE
Used to connect to sprinkler head, enabling the length to be determined at installation. PTFE thread tape is
recommended for threaded joints.
Pkg
Qty
Box
Qty
Box
Wt
Part # Size
357605 ½” x 6” 10 50 2
357607 ¾” x 6" 10 50 3
357675 ½“ x ¾” x 6” 10 100 7
POLY TANK FLANGE ADAPTER
This Bulk Head Fitting provides a water tight seal when making a connection through a container, such as a rain
barrel, tank, pond, or vessel. Fitting components join
together on both sides of the container wall. Includes female NPT threads on both ends and an EPDM gasket.
Part # Size
38905 ½” 10 3
38907 ¾” 10 3
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
PVC SCH. 40 PRESSURE FITTINGS
24
Genova Products
Page 29
PVC PRESSURE PIPE (SCH.80)
(Cold Water Use Only)
300 SERIES
Pressure
Part # Size
Rating at
73°F (PSI)
300055 ½” x 20’ (Sch. 80) Plain End 850 10 240 41
310055 ½” x 10’ (Sch. 80) Plain End 850 10 480 21
300075 ¾” x 20’ (Sch. 80) Plain End 690 10 200 56
310075 ¾” x 10’ (Sch. 80) Plain End 690 10 400 28
300105 1” x 20” (Sch. 80) Plain End 630 10 240 83
310105 1” x 10’ (Sch.80) Plain End 630 10 240 41
300115 1¼” x 20’ (Sch.80) Plain End 520 5 180 57
310115 1¼” x 10’ (Sch. 80) Plain End 520 5 180 29
300125 1½” x 20’ (Sch.80) Plain End 470 5 200 69
310125 1½” x 10’ (Sch. 80) Plain End 470 5 200 35
300225 2” x 20’ (Sch. 80) Plain End 400 5 150 96
COUPLING (SLIP X SLIP)
Bdl.
Qty
(lgths)
Box
Qty
(lgths)
CAP (SLIP)
Bdl
Wt
(lbs)
Used to join lengths of pipe.
Part # Size
301058 ½” 25 2
301078 ¾” 25 2
301108 1” 25 4
301148 1¼” 10 2
301158 1½” 10 3
301208 2” 10 4
Pkg
Qty
Box
Qty
COUPLING (FIP X FIP)
Used to join lengths of pipe.
Part # Size
301258 ½” 25 2
301278 ¾” 25 3
301288 1” 25 5
301248 1¼” 10 3
301218 1½” 10 4
301228 2” 10 5
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Used to cap pipe.
Part # Size
301558 ½” 25 2
301578 ¾” 25 3
301588 1" 25 5
301598 1¼" 10 2
301518 1½" 10 3
301528 2” 10 4
Pkg
Qty
Box
Qty
Box
Wt
CAP (FIP)
Used to cap threaded pipe. Adapts to standard male pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
301658 ½” 25 2
301678 ¾” 25 2
301688 1” 25 3
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 80 PRESSURE FITTINGS
Genova Products
25
Page 30
PLUG (MIP)
REDUCING BUSHING (MIP X FIP)
Adapts to standard female pipe threads. PTFE thread tape
is recommended for threaded joints.
300 SERIES
Part # Size
318058 ½” 25 1
318078 ¾” 25 1
318108 1” 25 2
318148 1¼” 10 1
318158 1½” 10 1
318208 2” 10 2
Pkg
Qty
Box
Qty
REDUCING BUSHING (SPIGOT X SLIP)
Inserts into tting hub to reduce to smaller pipe size.
Part # Size
302518 ½" x ¼ 25 1
302758 ¾" x ½" 25 1
302158 1” x ½" 25 2
302178 1" x ¾" 25 1
302458 1¼” x ½" 10 2
302478 1¼" x ¾" 10 2
302408 1¼" x 1" 10 1
302558 1½" x ½" 10 2
302578 1½" x ¾” 10 2
302508 1½" x 1" 10 2
302548 1½" x 1¼" 10 1
302258 2” x ½” 10 3
302278 2" x ¾” 10 3
302208 2” x 1" 10 3
302248 2" x 1¼" 10 3
302218 2” x 1½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Inserts into threaded tting socket to reduce to smaller
threaded opening. PTFE thread tape is recommended for
threaded joints.
Part # Size
343758 ¾" x ½” 25 1
343158 1" x ½” 25 3
343178 1" x ¾” 25 2
343508 1½" x 1" 10 2
343208 2" x 1” 10 2
343218 2" x 1½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
REDUCING BUSHING (SPIGOT X FIP)
Inserts into tting hub to reduce to smaller pipe size. PTFE thread tape is recommended for threaded joints.
Part # Size
342758 ¾" x ½" 25 1
342158 1” x ½" 25 2
342178 1" x ¾" 25 1
342478 1¼” x ¾" 10 1
342408 1¼" x 1" 10 1
342558 1½" x ½" 10 2
342578 1½" x ¾" 10 2
342508 1½" x 1” 10 2
342548 1½" x 1¼" 10 1
342258 2" x ½" 10 2
342278 2” x ¾” 10 3
342208 2" x 1” 10 3
342248 2” x 1¼" 10 3
342218 2" x 1½" 10 2
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 80 PRESSURE FITTINGS
26
Genova Products
Page 31
MALE ADAPTER (SLIP X MIP)
Adapts pressure pipe to standard female pipe threads.
PTFE thread tape is recommended for threaded joints.
Part # Size
304058 ½” 25 1
304078 ¾” 25 2
304108 1” 25 3
304148 1¼” 10 2
304158 1½” 10 3
304208 2” 10 3
Pkg
Qty.
Box
Qty
Box
Wt
FEMALE ADAPTER (SLIP X FIP)
Adapts pressure pipe to standard male pipe threads. PTFE
thread tape is recommended for threaded joints.
Part # Size
303058 ½” 25 2
303078 ¾” 25 3
303108 1” 25 5
303148 1¼” 10 3
303158 1½” 10 4
303208 2” 10 5
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW (SLIP X SLIP)
Used to change direction in piping.
Part # Size
307058 ½” 25 2
307078 ¾” 25 3
307108 1” 25 5
307148 1¼” 10 3
307158 1½” 10 4
307208 2” 10 7
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW (SLIP X FIP)
Used to change direction in piping. PTFE thread tape is
recommended for threaded joints.
Part # Size
339058 ½” 25 3
339078 ¾” 25 4
339108 1” 25 6
339148 1¼” 10 4
339158 1½” 10 6
339208 2” 10 8
Pkg
Qty
Box
Qty
Box
Wt
300 SERIES
PVC SCH. 80 PRESSURE FITTINGS
45° ELBOW (SLIP X SLIP)
Used to change direction in piping.
Part # Size
306058 ½” 25 3
306078 ¾” 25 3
306108 1” 25 5
306148 1¼” 10 2
306158 1½” 10 4
306208 2” 10 6
Pkg
Qty
Box
Qty
Used to change direction in piping. PTFE thread tape is
recommended for threaded joints.
Box
Part # Size
Wt
337058 ½” 25 3
337078 ¾” 25 5
337108 1” 25 6
337148 1¼” 10 4
337158 1½” 10 5
337208 2” 10 8
Genova Products
90° ELBOW (FIP X FIP)
Pkg
Qty
Box
Qty
Box
Wt
27
Page 32
TEE (SLIP X SLIP X SLIP)
Used to provide a branch supply line from a main line.
300 SERIES
Part # Size
314058 ½” 25 3
314078 ¾” 25 3
314108 1” 25 8
314148 1¼“ 10 4
314158 1½” 10 5
314208 2” 10 7
Pkg
Qty
Box
Qty
TEE (FIP X FIP X FIP)
Adapts to male threaded main line to provide a threaded branch line of the same size. PTFE thread tape is
recommended for threaded joints.
Part # Size
354558 ½” 25 4
354578 ¾” 25 5
354588 1” 25 8
354548 1¼“ 10 5
354518 1½” 10 7
354528 2” 10 9
Pkg
Qty
Box
Qty.
Box
Wt
Box
Wt
UNION (SLIP X SLIP)
This union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working Pressure: 150 PSI @ 73°
Part # Size
372058 ½” 10 3
372078 ¾” 10 4
372108 1” 10 6
372148 1¼“ 5 3
372158 1½” 5 7
372208 2” 5 9
Pkg
Qty
Box
Qty
Box
Wt
PVC SCH. 80 PRESSURE FITTINGS
28
Genova Products
Page 33
Insert ttings are used with polyethylene (PE) pipe in buried cold water applications
only, such as irrigation, residential lawn sprinkler systems, water service pipe, and swimming pool installations.
Plastic Insert Fittings
Meets ASTM D2609
NSF Listed (except class rated pipe)
NSF Approved PE Pipe
Meets ASTM D2239
Meets PE 3408
100, 125, 160 and 200 PSI ratings
350/360/370/380 SERIES
Non-NSF PE Pipe
Do not use on potable water systems!
(Polyethylene Pipe (900 Series) found on page #103)
Insert ttings join to PE pipe with stainless steel clamps.
• MIP = Male Iron Pipe Threads; FIP = Female Iron Pipe Threads
• Insert Fitting Materials
- Polypropylene & PVC (350 & 380 Series)
- Nylon (360 Series)
- Galvanized (370 Series)
INSERT FITTINGS & PE PIPE
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
29
Page 34
INSERT COUPLING (INSERT X INSERT)
Used to join polyethylene tubing.
Part # Size
350105 ½” 10 500 9
350107 ¾” 10 400 10
350110 1” 10 200 11
350114 1¼” 10 150 10
350115 1½” 10 50 5
350120 2” 5 50 7
350/360/370/380 SERIES
INSERT COUPLING (INSERT X INSERT)
Pkg
Qty
Box
Qty
CONTRACTOR PACK
Box
Wt
INSERT FEMALE ADAPTER (INSERT X FIP)
Adapts polyethylene tubing to standard male pipe threads.
PTFE thread tape is recommended for threaded joints.
Part # Size
350305 ½” 10 200 6
350307 ¾” 10 400 16
350310 1” 10 120 7
350314 1¼” 10 200 18
350315 1½” 5 50 6
350320 2” 5 50 8
Pkg
Qty
Box
Qty
Box
Wt
INSERT MALE ADAPTER (INSERT X MIP)
Conveniently packaged in quantities of 10.
Part # Size
C350105 ½” 50 9
C350107 ¾” 40 10
C350110 1” 20 11
Pkg
Qty
Box
Qty
INSERT REDUCING COUPLING
(INSERT X INSERT)
Used to reduce to dierent polyethylene tubing sizes.
Part # Size
350175 ¾” x ½” 25 200 6
350116 1” x ½” 20 300 11
350117 1” x ¾” 10 300 11
380147 1¼” x ¾” 20 2
350140 1¼” x 1” 10 100 6
350157 1½” x ¾” 10 50 4
350150 1½" x 1" 10 50 4
350154 1½" x 1¼" 5 50 5
350220 2” x 1” 5 50 5
350124 2” x 1¼" 5 50 6
350121 2” x 1½” 5 50 6
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Adapts polyethylene tubing to standard female pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
350405 ½” 10 500 11
350407 ¾” 10 300 11
350410 1” 10 200 10
350414 1¼” 10 150 11
350415 1½” 10 50 6
350420 2” 5 50 3
Pkg
Qty
Box
Qty
Box
Wt
INSERT REDUCING MALE ADAPTER
(INSERT X MIP)
Adapts to polyethylene tubing to standard female pipe threads. Fitting reduces to smaller tubing sizes. PTFE
thread tape is recommended for threaded joints.
Part # Size
350475 ½" x ¾" 25 350 11
380457 ¾" x ½" 50 2
350417 ¾" x 1” 20 200 9
380447 ¾” x 1¼” 25 3
380451 1” x ½” 50 3
350477 1” x ¾” 20 200 8
Pkg
Qty
Box
Qty
Box
Wt
INSERT FITTINGS
30
(Continued.....)
Genova Products
Page 35
(Insert Reducing Male Adapter Continued.....)
Part # Size
350440 1” x 1¼" 10 100 8
350450 1" x 1½" 10 80 9
380404 1¼” x 1” 15 2
350454 1¼" x 1½" 10 80 10
380445 1½” x 1¼" 10 2
350421 1½” x 2” 10 50 8
Pkg
Qty
Box
Qty
INSERT PLUG (INSERT)
Used to form permanent closure.
Part # Size
351825 ½” 10 300 3
351827 ¾” 10 250 5
351830 1” 10 200 5
351834 1¼” 10 200 8
351835 1½” 10 50 3
351840 2” 5 50 5
Pkg
Qty
Box
Qty
INSERT ELBOW (INSERT X INSERT)
Used to change direction in piping.
Part # Size
350705 ½” 20 400 10
350707 ¾” 10 300 11
350710 1” 10 40 3
350714 1¼” 10 40 4
350715 1½” 5 50 7
350720 2” 5 40 11
Pkg
Qty
Box
Qty
INSERT ELBOW (INSERT X INSERT)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
C350705 ½” 50 14
C350707 ¾” 30 12
C350710 1” 20 15
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
Box
Wt
INSERT REDUCING ELBOW
(INSERT X INSERT)
Used to change direction. Fitting reduces to smaller tubing sizes.
Part # Size
350775 ¾” x ½” 20 300 13
350717 1” x ¾” 10 40 3
350740 1¼” x 1" 10 50 7
350754 1½” x 1¼” 10 40 7
Pkg
Qty
Box
Qty
Box
Wt
INSERT COMBINATION ELBOW
(INSERT X MIP)
Used to change direction. Adapts to standard female pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
352805 ½” 10 400 11
352807 ¾” 10 200 9
352810 1" 10 100 9
352814 1¼” 10 80 12
352815 1½” 5 50 10
352820 2” 5 40 11
Pkg
Qty
Box
Qty
Box
Wt
INSERT COMBINATION ELBOW (INSERT X FIP)
Used to change direction. Adapts to standard male pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
353905 ½” 10 200 9
353907 ¾” 10 200 12
353910 1" 10 40 4
353914 1¼” 10 40 6
353915 1½” 5 50 11
353920 2” 5 30 10
Pkg
Qty
Box
Qty
Box
Wt
350/360/370/380 SERIES
INSERT FITTINGS
Genova Products
31
Page 36
INSERT REDUCING COMBINATION ELBOW
(INSERT X FIP)
Used to change direction. Adapts to standard male pipe threads. Fitting reduces to smaller tubing size.PTFE thread
tape is recommended for threaded joints.
Part # Size
354175 ¾" x ½” 10 300 12
354115 1” x ½” 10 80 6
354117 1" x ¾” 10 80 6
384145 1¼” x ½” 25 3
384147 1¼” x ¾” 10 2
350/360/370/380 SERIES
354140 1¼” x 1" 10 40 7
Pkg
Qty
Box
Qty
INSERT TEE (INSERT X INSERT X INSERT)
Used to provide a branch supply line from a main line.
Part # Size
351405 ½” 10 260 10
351407 ¾” 10 300 16
351410 1" 10 100 8
351414 1¼” 10 100 18
351415 1½" 5 40 11
351420 2" 5 25 10
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
INSERT REDUCING TEE
(INSERT X INSERT X INSERT)
Used to provide a branch supply line from a main line. Fitting reduces to smaller tubing size.
Part # Size
351421 ¾" x ½" x ½" 20 300 17
351471 ¾" x ¾" x ½" 10 300 19
351423 1" x ¾" x ¾" 20 100 9
351475 1" x 1" x ½" 10 100 10
351477 1" x 1" x ¾" 10 100 10
351428 1¼" x 1" x ¾" 10 100 17
351429 1¼” x 1” x 1” 10 100 17
351490 1¼" x 1¼” x ½" 10 100 18
351491 1¼" x 1¼" x ¾" 10 100 18
351474 1¼" x 1¼" x 1" 10 100 18
381419 1½" x 1½" x 1¼" 5 2
381472 2" x 2" x 1½” 5 2
Pkg
Qty
Box
Qty
Box
Wt
INSERT COMBINATION TEE
(INSERT X INSERT X MIP)
INSERT TEE (INSERT X INSERT X INSERT)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
C351405 ½” 30 11
C351407 ¾” 25 14
C351410 1" 20 17
INSERT FITTINGS
32
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Used to provide a branch supply line from a main line. Branch line adapts to standard female pipe threads. PTFE
thread tape is recommended for threaded joints.
Part # Size
351445 ½” 20 240 11
351447 ¾” 10 300 19
351440 1” 10 100 11
351444 1¼” 10 100 20
351441 1½” 5 40 11
351442 2" 5 25 10
Pkg
Qty
Box
Qty
Box
Wt
Page 37
INSERT COMBINATION TEE
(INSERT X INSERT X FIP)
Used to provide a branch supply line from a main line. Branch line adapts to standard male pipe threads. PTFE thread tape is recommended for threaded joints.
Part # Size
351455 ½” 10 200 11
351457 ¾” 10 300 23
351458 1” 10 100 11
351454 1¼” 10 100 20
351451 1½” 5 40 12
351452 2" 5 25 12
Pkg
Qty
Box
Qty
Box
Wt
INSERT REDUCING COMBINATION TEE
(INSERT X INSERT X FIP)
Used to provide a branch supply line from a main line. Branch line adapts to standard male pipe threads. Fitting reduces to smaller tubing size. PTFE thread tape is recommended for threaded joints.
Part # Size
351481 ¾" x ¾" x ½" 10 200 10
351485 1" x 1" x ½" 10 100 8
351487 1” x 1” x ¾" 10 100 11
351483 1¼" x 1¼" x ½" 10 100 18
351488 1¼" x 1¼" x ¾" 10 100 17
351484 1¼" x 1¼" x 1" 10 100 16
381482 1½" x 1½ x ½" 5 2
381486 1½” x 1½” x ¾” 5 2
Pkg
Qty
Box
Qty
Box
Wt
INSERT CROSS (ALL INSERT)
Used to connect like size lateral tubing.
Part # Size
354407
354410
¾”
1”
Pkg
Qty
10 200 21
10 100 16
Box
Qty
Box
Wt
POLYETHYLENE CUTOFF NIPPLE
Used to connect to sprinkler head, enabling the length to be determined at installation. PTFE thread tape is recommended for threaded joints.
Part # Size
357605 ½” x 6” 10 50 2
357607 ¾” x 6" 10 50 3
357675 ½“ x ¾” x 6” 10 100 7
Pkg
Qty
Box
Qty
Box
Wt
NYLON INSERT COUPLING
(INSERT X INSERT)
Used to join polyethylene tubing.
Part # Size
360105 ½” 25 500 12
360107 ¾” 25 400 12
360110 1” 25 200 13
360114 1¼” 10 150 12
360115 1½” 10 50 6
360120 2” 5 50 9
Pkg
Qty
Box
Qty
Box
Wt
NYLON INSERT MALE ADAPTER
(INSERT X MIP)
Adapts polyethylene tubing to standard female pipe threads. PTFE thread tape is recommended for threaded joints.
Part # Size
360405 ½” 25 500 15
360407 ¾” 25 300 13
360410 1” 25 200 12
360414 1¼” 10 150 13
360415 1½” 10 50 7
360420 2” 5 50 10
Pkg
Qty
Box
Qty
Box
Wt
350/360/370/380 SERIES
INSERT FITTINGS
Genova Products
33
Page 38
NYLON INSERT ELBOW (INSERT X INSERT)
Used to change direction in piping.
Part # Size
360705 ½” 20 400 12
360707 ¾” 20 300 14
360710 1” 10 40 5
360714 1¼” 10 40 5
360715 1½” 5 50 9
360720 2” 5 40 14
350/360/370/380 SERIES
NYLON INSERT TEE (INSERT X INSERT X
Pkg
Qty
Box
Qty
Box
Wt
STEEL INSERT COUPLING (INSERT X INSERT)
Used to join polyethylene tubing.
Part # Size
370105 ½” 10 100 12
370107 ¾” 10 100 24
370110 1” 10 100 45
370114 1¼” 20 11
370115 1½” 20 14
370120 2” 10 12
Pkg
Qty
Box
Qty
Box
Wt
STEEL INSERT MALE ADAPTER (INSERT X
Adapts polyethylene tubing to standard female pipe threads. PTFE thread tape is recommended for threaded
joints.
Used to provide a branch supply line from a main line.
Part # Size
361405 ½” 20 260 12
361407 ¾” 20 300 20
361410 1" 10 100 14
361414 1¼” 10 100 22
361415 1½" 5 40 13
361420 2" 5 25 12
Pkg
Qty
Box Qty.
NYLON INSERT COMBINATION ELBOW
Used to change direction. Adapts to standard female pipe threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
362805 ½” 20 400 13
362807 ¾” 20 200 11
362810 1" 10 100 10
362814 1¼” 10 80 14
362815 1½” 5 50 12
Pkg
Qty
Box
Qty
INSERT FITTINGS
Box
Wt
Box
Wt
Part # Size
370405 ½” 25 4
370407 ¾” 25 6
370410 1” 20 8
370414 1¼” 20 11
370415 1½” 20 15
370420 2” 10 11
Pkg.
Qty
Box
Qty
Box
Wt
34
Genova Products
Page 39
Sewer & Drain and ttings are used for sewer lines, septic tank seepage systems and
perimeter drains.
Solid & Perforated PVC Sewer Pipe
3” & 4” meets ASTM D2729
4” & 6” SDR 35 meets ASTM D3034
Pipe measures 10’ before belling
PVC Sewer Fittings
3” meets ASTM D2949 or exceeds ASTM D2729
4” & 6” meets ASTM D3034
Styrene Sewer Fittings
Meets ASTM D2852
400 SERIES
PVC SEWER PIPE, PVC, STYRENE & CORRUGATED SEWER FITTINGS
Corrugated Sewer Fitting
Meets ASTM F405
• Sewer pipe sizes are sometimes referred to as PSM (Plastic Sewer Main).
Solvent weld joints on PVC and Styrene Fittings.
“S” prex denotes tting is made of Styrene.
HDPE Corrugated ttings snap together. Use with HDPE Corrugated pipe.
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
35
Page 40
VINYL SEWER AND DRAIN PIPE
(10’ BELL END)
REDUCING COUPLING
(SEWER HUB X SEWER HUB
400 SERIES
An integral hub is provided on each length of sewer and
drain pipe to facilitate easy joining without the need for
additional couplings. Pipe is perforated with 2 rows of 5/8” holes on 5” centers 120° apart. 3” Pipe is perforated with 2 rows of ½” holes on 5” centers 120° apart.
*This pipe perforated with 3 rows of ¾” holes on 5” centers 120° apart. Meets Indiana code.
Note: Be sure to order by the length.
ASTM
Part # Size
Stan-
dard
40030 3” Solid D2729 5 75 25
40031 3” Perf. D2729 5 75 25
40040 4” Solid D2729 5 120 30
40041 4” Perf. D2729 5 120 30
40041I* 4” Perf. D2729 5 120 30
40066 6” Solid D2729 24 310
40050 4” Solid D3034 5 80 51
40051 4” Perf. D3034 5 80 51
40060 6” Solid D3034 24 558
COUPLING (HUB X HUB)
Bdl Qty
Skid
Qty
Bdl
Wt
Used to increase or reduce pipe sizes.
Part # Size
40143 4” x 3" 20 9
S40143 4” x 3” 20 7
41540 6” x 4” 10 13
S41540 6” x 4” 10 1
Pkg
Qty
Box
Qty
ADAPTER COUPLING
(SEWER HUB X PVC-DWV HUB)
Used to join straight lengths of pipe.
Part # Size
40131 3” x 1½” 20 7
40132 3” x 2” 20 6
41534 3” x 4” 20 16
41543 4” x 3” 20 12
41544 4” x 4” 10 7
41564 6” x 4” 5 7
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Used to join straight lengths of pipe.
Part # Size
40130 3” 20 6
S40130 3” 20 5
40140 4” 10 50 22
S40140 4” 10 50 18
40160 6” 5 8
S40160 6” 5 6
Pkg.
Qty
Box
Qty
PVC SEWER PIPE, PVC & STYRENE SEWER FITTINGS
36
Box
Used to permanently or temporarily cap pipe.
Wt
Part # Size
40153 3” 20 4
S40153 3” 20 4
40154 4” 10 4
S40154 4” 10 3
40156 6” 5 6
S40156 6” 5 5
Genova Products
CAP (HUB)
Pkg
Qty
Box
Qty
Box
Wt
Page 41
REDUCING BUSHING
(SEWER SPIGOT X SEWER HUB)
Inserts into tting hub to reduce to smaller pipe size.
400 SERIES
FEMALE ADAPTER (HUB X FIP)
Part # Size
40264 6" x 4" 5 6
S40264 6" x 4" 5 5
Pkg
Qty
Box
Qty
Box
Wt
ADAPTER BUSHING
(SEWER SPIGOT X PVC-DWV HUB)
Adapts a sewer and drain tting hub to Schedule 40 IPS
(700 Series pipe size).
Part # Size
40231 3” x 1½” 20 7
40232 3” x 2” 20 8 S40241 4” x 1½” 10 3 S40242 4” x 2” 10 4
Pkg
Qty
Box
Qty
Box
Wt
ADAPTER BUSHING
(SEWER SPIGOT X FIP)
Inserts into tting hub to reduce to standard male pipe
threads. PTFE thread tape is recommended for threaded
joints.
Adapts sewer pipe to standard male pipe threads. PTFE
thread tape is recommended for threaded joints.
Part # Size
40330 3” 20 10
S40330 3” 20 4
40340 4” 10 7
S40340 4” 10 5
40360 6” 5 6
Pkg
Qty
Box
Qty
Box
Wt
MALE ADAPTER (HUB X MIP)
Adapts sewer pipe to standard female pipe threads. PTFE
thread tape is recommended for threaded joints.
Part # Size
40430 3” 20 7
Pkg
Qty
Box
Qty
Box
Wt
PVC & STYRENE SEWER FITTINGS
Part # Size
44241 4” x 1½” 10 3
S44241 4” x 1½” 10 3
Pkg
Qty
Box
Qty
ADAPTER BUSHING
(PVC-DWV SPIGOT X SEWER HUB)
Adapts a Schedule 40 IPS tting hub to sewer pipe.
Part # Size
45330 3” x 3” 20 3
Pkg
Qty
Box
Qty
Genova Products
Box
Wt
Box
Wt
VINYL TO CLAY ADAPTER (HUB X HUB)
Used to connect vinyl sewer pipe to clay tile.
Part # Size
41540 4” 10 13
S41540 4” 10 10
Pkg
Qty
Box
Qty
Box
Wt
37
Page 42
SEWER PIPE TO CAST IRON BUSHING
(HUB X SPIGOT)
45° STREET ELBOW (HUB X SPIGOT)
Part # Size
400 SERIES
40540 4” 10 4
S40540 4” 10 7
Pkg
Qty
Box
Qty
SEWER PIPE TO CAST IRON ADAPTER
(HUB X HUB)
Can be joined to cast iron with oakum and poured lead or
lead substitute.
Part # Size
41740 4” 10 8
Pkg
Qty
Box
Qty
22½° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a “Sixteenth Bend”.
Part # Size
40830 3” 20 10
40840 4” 10 7
S40840 4” 10 5
40860 6” 5 10
Pkg
Qty
Box
Qty
45° ELBOW (HUB X HUB)
Box
Wt
Box
Wt
Box
Wt
Used to change direction in piping. Sometimes called a “Street Eighth Bend”.
Part # Size
42730 3” 20 9
S42730 3” 20 7
42740 4” 10 8
S42740 4” 10 6
42760 6” 5 12
S42760 6” 5 11
Pkg
Qty
Box
Qty
Box
Wt
90° SANITARY ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a “Quarter Bend”.
Part # Size
42830 3” 20 14
S42830 3” 20 10
42840 4” 10 11
S42840 4” 10 8
42860 6” 8 23
Pkg
Qty
Box
Qty
Box
Wt
90° SANITARY STREET ELBOW
(HUB X SPIGOT)
Used to change direction in piping. Sometimes called an “Eighth Bend”.
Part # Size
40630 3” 20 10
S40630 3” 20 7
40640 4” 10 8
S40640 4” 10 6
40660 6” 5 12
S40660 6” 5 11
PVC & STYRENE SEWER FITTINGS
Pkg
Qty
Box
Qty
38
Box
Wt
Used to change direction in piping. Sometimes called a “Street Quarter Bend”.
Part # Size
42936 3” 20 14
S42936 3” 20 9
42940 4” 10 11
S42940 4” 10 9
Genova Products
Pkg
Qty
Box
Qty
Box
Wt
Page 43
90° SHORT TURN STREET ELBOW
(HUB X SPIGOT)
Used to change direction in piping. Sometimes called a “Street Quarter Bend”.
Part # Size
42946 4” 10 8
42966 6” 5 15
Pkg
Qty
Box
Qty
Box
Wt
90° SHORT TURN ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a “Short Turn Quarter Bend”.
SANITARY TEE (HUB X HUB X HUB)
Used to connect vertical branch line to straight sewer line. Also, used with cleanout to provide access to piping.
Part # Size
41130 3” 20 22
S41130 3” 20 13
41140 4” 10 14
S41140 4” 10 11
41160 6” 6 23
Pkg
Qty
Box
Qty
Box
Wt
BULL NOSE TEE (HUB X HUB X HUB)
400 SERIES
Part # Size
40730 3” 20 10
S40730 3” 20 7
40740 4” 10 9
S40740 4” 10 7
40760 6” 5 16
S40760 6” 5 13
Pkg
Qty
Box
Qty
Box
Wt
WYE (HUB X HUB X HUB)
Used to connect horizontal branch line to straight sewer line. Also, used with cleanout to provide access to piping.
Part # Size
41030 3” 20 19
S41030 3” 20 14
41040 4” 10 16
S41040 4” 10 12
41060 6” 6 28
S41060 6” 6 20
41064 6” x 6” x 4” 5 22
Pkg
Qty
Box
Qty
Box
Wt
Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where ow characteristics are
not a primary consideration.
Part # Size
41430 3” 10 8
S41430 3” 20 11
41440 4” 10 11
S41440 4” 10 9
41460 6” 5 19
S41460 6” 5 17
41464 6” x 6” x 4” 6 21
S41464 6” x 6” x 4” 6 20
Pkg
Qty
Box
Qty
Box
Wt
TWO-WAY CLEANOUT (HUB X HUB X HUB)
Used with a vertical pipe stack, this tting provides for
above ground level access to piping.
Part # Size
41644 4” 10 16
Pkg
Qty
Box
Qty
Box
Wt
PVC & STYRENE SEWER FITTINGS
Genova Products
39
Page 44
FITTING CLEANOUT BODY (SPIGOT X FIP)
CROSS (ALL HUB)
Solvent welds into tting hub and adapts to male threaded
plug. PTFE thread tape is recommended for threaded
400 SERIES
joints.
Part # Size
41629 3” 20 7
S41629 3” 20 4
41639 4” 10 4
S41639 4” 10 4
41659 6” 5 6
Pkg
Qty
Box
Qty
FITTING CLEANOUT W/THREADED PLUG
Solvent welds into tting hub to provide access to piping. PTFE thread tape is recommended for threaded joints.
Part # Size
41640 4” 10 8
S41640 4” 10 6
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Used to connect two branch lines approaching a main sewer pipe from opposing directions. Used primarily in
seepage bed grid in conjunction with perforated pipe.
Part # Size
43240 4” 10 23
S43240 4” 10 10
Pkg
Qty
Box
Qty
Box
Wt
SADDLE (STREET/SOCKET DESIGN)
Solvent welds directly to side of sewer pipe to provide a simple way of connecting a branch into a drain pipe. The
inlet is constructed to accept a 2” tting over its outside
diameter or a 1½" pipe into its inside diameter.
Part # Size
41241 4” x 1½”/2” 10 5
S41241 4” x 1½”/2” 10 4
Pkg
Qty
Box
Qty
Box
Wt
PLUG (MIP)
Used to form a removable closure. PTFE thread tape is
recommended for threaded joints.
Part # Size
S41830 3” 20 4
41840 4” 10 3
41860 6” 5 4
S41860 6” 5 4
Pkg
Qty
Box
Qty
PVC & STYRENE SEWER FITTINGS
40
Used to connect rain gutter downspouts to underground sewer piping.
Part # Size
Box
Wt
S45233 2” x 3” x 3” 10 100 27
45234 2” x 3” x 4” 10 5
S45234 2” x 3” x 4” 10 4
45344 3” x 4” x 4” 10 5
S45344 3” x 4” x 4” 10 4
Genova Products
DOWNSPOUT ADAPTER
Pkg
Qty
Box
Qty
Box
Wt
Page 45
OFFSET DOWNSPOUT ADAPTER
(SEWER HUB OR SCH. 40 SPIGOT)
Used to connect rain gutter downspouts to underground sewer piping.
400 SERIES
Part # Size
46234 2” x 3” x 4” 10 5
46344 3” x 4” x 4” 10 5
VINYL “HUB-FIT” FLOOR STRAINER
Prevents debris from entering a drain opening on the oor. Fits ush into any tting hub.
Part # Size
49230 3” 20 5
S49230 3” 20 4
49240 4” 10 5
S49240 4” 10 4
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
PVC & STYRENE SEWER FITTINGS
Genova Products
41
Page 46
EXTERNAL SNAP COUPLING (HUB X HUB)
Snaps over pipe to connect two pieces of pipe.
400 SERIES
Part # Size
48030 3” 24 3
48040 4” 20 3
48060 6” 8 3
Pkg
Qty
Box
Qty
Box
Wt
CORRUGATED TO RIGID ADAPTER
(INSERT X HUB)
Connects corrugated pipe directly to rigid pipe or to rigid
tting.
Part # Size
48430 3” 20 2
48440 4” 24 4
Pkg
Qty
Box
Qty
Box
Wt
INTERNAL SNAP COUPLING
(INSERT X INSERT)
Snaps inside pipe to connect two pieces of pipe.
Part # Size
48230 3” 30 3
48240 4” 25 5
48260 6” 8 3
Pkg
Qty
Box
Qty
Box
OFFSET REDUCING COUPLING (HUB X HUB)
Transitions from one size pipe to another.
Part # Size
48043 4” x 3” 20 4
48064 6” x 4” 8 3
Pkg
Qty
Box
Qty
Box
CAP (HUB)
Wt
Wt
90° ELBOW (HUB X HUB)
Changes direction in pipe, sometimes called a “Quarter Bend”.
Part # Size
48830 3” 15 4
48840 4” 12 3
48860 6” 4 3
Pkg
Qty
Box
Qty
Box
Wt
STRAIGHT TEE (HUB X HUB X HUB)
Connects lateral or riser pipe to drain line.
Part # Size
48130 3” 12 3
48140 4” 12 4
48160 6” 4 4
Pkg
Qty
Box
Qty
Box
Wt
REDUCING TEE (HUB X HUB X HUB)
Used to terminate pipe.
Part # Size
48153 3” 20 2
48154 4” 30 4
48156 6” 10 2
Pkg
Qty
SINGLE WALL HDPE CORRUGATED FITTINGS
42
Box
Qty
Box
Wt
Genova Products
Connects smaller branch pipe to drain line. Cut o branch
socket(s) to make 5” or 6” socket.
Part # Size
48464 6” x 6” x 4” 3 3
Pkg
Qty
Box
Qty
Box
Wt
Page 47
BLIND TEE (HUB X HUB)
Used as a 90° Elbow. Cut o 6” cap to make a Hub x Hub x Hub Tee. Cut o branch socket(s) to make 5” or
6” socket.
400 SERIES
Part # Size
48560 6’ 3 3
48564 6” x 6” x 4” * 3 4
Pkg
Qty
Box
Qty
WYE (HUB X HUB X HUB)
Connects lateral branch pipe to drain line.
* Cut o 4” branch socket to make 6” socket.
Part # Size
48630 3” 10 4
48640 4” 8 4
48660 6” 4 5
48664 6” x 6” x 4” 4 5
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
SINGLE WALL HDPE CORRUGATED FITTINGS
DOWNSPOUT ADAPTER (DS X INSERT)
Used to transition from rain gutter downspout to corrugated pipe. Snaps inside corrugated pipe.
Part # Size
48233 2” x 3” x 3” 15 2
48234 2” x 3” x 4” 18 3
48344 3” x 4” x 4” 15 3
48466 4” x 6” x 6” 2 1
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
43
Page 48
500 SERIES
CPVC TUBING & FITTINGS
44
Genova Products
Page 49
Chlorinated Polyvinyl Chloride (CPVC) tubing and ttings are used within buildings for potable hot and cold water distribution from the water meter to xtures.
CPVC Tubing and Fitting Systems
Meets ASTM D2846
Rated for 400 PSI @ 73°F & 100 PSI @ 180°F
NSF Listed
500 SERIES
No Lead CPVC Fittings
Product certied to NSF Standard 61, Annex G
Weighted Average Lead Content Of <0.25%
• Outside diameters are the same as copper tube. (CTS = Copper Tube Size)
CPVC systems are accepted by all major model building codes.
• Carded (c) parts contain bar code and installation instructions.
• CPVC tubing is rated at 210° for water heater relief valve drain applications.
Solvent weld joints.
CPVC TUBING & FITTINGS
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
45
Page 50
CPVC TUBING
(Note: Be sure to order by the length and not by the foot.)
COUPLING (SLIP X SLIP) CONTRACTOR PACK
Inner
Part # Size
500 SERIES
52405 ¼” x 5’ 10 100 4200 2
50005 ½” x 10’ 10 100 1000 9
50025 ½” x 5’ 10 100 1000 4
50007 ¾” x 10’ 10 50 500 15
50035 ¾” x 5’ 10 50 500 7
560010 1” x 10’ 5 480 12
560011
560012
560022 2” x 10’ 5 120 43
1¼” x
10’
1½” x
10’
Bdl
(lgths)
5 250 18
5 225 25
Bdl Qty
(lgths)
Skid
(legths)
CPVC TUBING
Qty
Bdl
Wt
(lbs)
Conveniently packaged in quantities of 10.
Part # Size
50105CP ½” 50 9
50107CP ¾” 25 8
Pkg
Qty
Box
Qty
Box
Wt
REDUCING COUPLING (SLIP X SLIP)
Used to join straight lengths of CPVC tubing. Reduces to
smaller size tubing.
Part # Size
50175 ¾" x ½” 10 500 13
50117 1” x ¾" 10 100 5
Pkg
Qty
Box
Qty
Box
Wt
REPAIR COUPLING (NO STOP)(SLIP X SLIP)
Part # Size
52421 ½”I.D./5/8”O.D. 100’ 1 9
52431 ¾”I.D./7/8”OD. 100’ 1 15
Coil
Size
COUPLING (SLIP X SLIP)
Used to join straight lengths of CPVC tubing.
Part # Size
50105 ½" 20 500 9
50107 ¾" 20 260 9
50110 1" 10 100 7
50114 1¼" 10 100 10
50115 1½" 10 50 9
50120 2" 5 25 9
Pkg
Qty
CPVC TUBING & FITTINGS
Coil
Qty
Box
Qty
Coil
Wt
Box
Wt
Furnished without center stop so that stationary lengths of pipe can be spliced together.
Part # Size
50102 ½” 10 100 2
50103 ¾” 10 50 2
50111 1” 10 20 1
Pkg
Qty
Box
Qty
Box
Wt
CAP (SLIP)
Used to permanently or temporarily cap CPVC Tubing.
Part # Size
50155 ½” 10 500 6
50157 ¾” 10 250 6
50158 1” 10 100 5
50159 1¼” 10 100 7
50151 1½” 10 50 6
50152 2” 5 25 6
Pkg
Qty
Box
Qty
Box
Wt
46
Genova Products
Page 51
REDUCING BUSHING (SPIGOT X SLIP)
500 SERIES
SPECIAL FEMALE ADAPTER (SLIP X FIP)
Used to reduce from tting socket to CPVC tubing.
Part # Size
50275 ¾” x ½” 10 500 9
50215 1” x ½” 10 100 4
50217 1” x ¾” 10 100 3
50245 1¼” x ½” 10 100 6
50247 1¼” x ¾" 10 100 6
50240 1¼” x 1” 10 100 5
50257 1½” x ¾” 10 100 10
50250 1½” x 1” 10 100 9
50254 1½” x 1¼" 10 100 7
50227 2” x ¾” 10 50 9
50220 2” x 1” 10 100 18
50224 2” x 1¼" 10 50 10
50221 2” x 1½” 10 50 8
Pkg
Qty
Box
Qty
Box
Wt
PVC TO CPVC BUSHING
(IPS SPIGOT X CTS SLIP)
Used in COLD WATER APPLICATIONS ONLY to
adapt from a PVC tting socket to CPVC tubing.
Part # Size
55305 ½” 10 200 4
55307 ¾” 10 200 5
55310 1” 10 100 4
55314 1¼” 5 25 2
55315 1½” 5 25 2
55320 2” 5 25 3
Pkg
Qty
Box
Qty
Box
Wt
Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leakproof seal. Hand-
tighten only! This tting seals by means of a gasket. The use of joint compound or PTFE tape is neither necessary
or recommended.
Part # Size
50305 ½” 20 500 17
50307 ¾” 10 250 11
50310 1” 10 100 9
Pkg
Qty
Box
Qty
Box
Wt
MALE ADAPTER (MIP X SLIP)
Used to adapt female pipe threads to CPVC tubing in COLD WATER APPLICATIONS ONLY! Where hot water or changing water temperatures are likely to be encountered, utilize the recommended TRANSITION UNIONS. PTFE thread tape is the accepted method of sealing pipe
threads on CPVC ttings. Do not use other materials or compounds unless specically approved by the
manufacturer.
Part # Size
50405 ½” 20 500 12
50407 ¾” 10 250 12
50410 1” 10 100 7
50414 1¼” 10 50 5
50415 1½” 10 50 8
50420 2” 5 25 9
50475 ½” x ¾” 10 250 9
Pkg
Qty
Box
Qty
Box
Wt
MALE ADAPTER (MIP X SLIP)
CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
50405CP ½” 50 11
50407CP ¾” 25 12
Pkg
Qty
Box
Qty
Box
Wt
CPVC FITTINGS
Genova Products
47
Page 52
RISER ADAPTER (MIP X SLIP)
45° STREET ELBOW (SLIP X SPIGOT)
Connects to all exible supply lines and solvent welds onto
500 SERIES
CPVC pipe.
Part # Size
50455 ½” 20 500 14
Pkg
Qty
Box
Qty
PVC TO CPVC ADAPTER (IPS SLIP X CTS SLIP)
Used in COLD WATER APPLICATIONS ONLY to adapt from CPVC pipe to PVC pipe.
Part # Size
51577 ¾” 25 250 9
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Used on close osets where very short pieces of CPVC
pipe would otherwise have to be used with conventional
45° elbows. A principal use is to oset piping over and around existing piping mounted on at surfaces such as
wall or ceiling.
Part # Size
52705 ½” 20 500 14
52707 ¾” 20 260 13
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW (SLIP X SLIP)
Used to change direction in piping.
Part # Size
50705 ½” 20 500 14
50707 ¾” 20 260 15
50710 1” 10 100 10
50714 1¼” 10 100 15
50715 1½” 10 50 13
50720 2” 5 25 14
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW (SLIP X SLIP) CONTRACTOR PACK
45° ELBOW (SLIP X SLIP)
Used to change direction in piping. Sometimes used in
conjunction with a 12” length of CPVC tubing on long
runs to absorb expansion.
Part # Size
50605 ½” 20 500 11
50607 ¾” 20 260 10
50610 1” 10 50 4
50614 1¼” 10 50 6
50615 1½” 10 50 10
50620 2” 5 25 11
CPVC FITTINGS
48
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Conveniently packaged in quantities of 10.
Part # Size
50705CP ½” 50 14
50707CP ¾” 25 14
Pkg
Qty
Box
Qty
Box
Wt
REDUCING 90° ELBOW (SLIP X SLIP)
Used to change direction in piping. This elbow can also be used as a ¾” Street Elbow.
Part # Size
50775 ¾” x ½” 10 250 16
Pkg
Qty
Box
Qty
Box
Wt
Page 53
90° STREET ELBOW (SLIP X SPIGOT)
Used to change direction in piping 90° from a tting
socket. The ¾” Elbow (Part #52907) can also be used as a ¾” x ½” reducing elbow.
Part # Size
52905 ½” 10 500 16
52907 ¾” 10 250 16
Pkg
Qty
Box
Qty
Box
Wt
TEE (SLIP X SLIP X SLIP)
Used to provide a branch supply line from a main line.
Part # Size
51405 ½” 20 500 17
51407 ¾” 20 260 19
51410 1” 10 100 12
51414 1¼“ 10 50 10
51415 1½” 5 25 8
51420 2” 5 25 17
Pkg
Qty
Box Qty.
Box
Wt
REDUCING TEE (SLIP X SLIP X SLIP)
Used to provide a branch supply line from a main line. Reduces to a smaller pipe size.
Part # Size
51471 ¾” x ¾” x ½” 20 260 17
51473 ¾” x ½” x ½” 20 260 14
51476 ¾” x ½” x ¾" 20 260 16
51475 1” x 1” x ½” 5 25 3
51477 1” x 1” x ¾” 5 25 3
51490 1¼” x 1¼” x ½” 5 25 4
51491 1¼” x 1¼” x ¾” 5 25 5
51474 1¼” x 1¼” x 1” 5 25 5
51493 1½” x 1½” x ½” 5 25 7
51494 1½” x 1½” x ¾” 5 25 7
51495 1½” x 1½” x 1” 5 25 8
51419 1½” x 1½” x 1¼” 5 25 8
51435 2” x 2” x 1” 5 25 14
51436 2” x 2” x 1¼” 5 25 15
51472 2” x 2” x 1½” 5 25 16
Pkg
Qty
Box
Qty
Box
Wt
SPECIAL TORQUE ESCUTCHEON
500 SERIES
TEE (SLIP X SLIP X SLIP) CONTRACTOR PACK
Conveniently packaged in quantities of 10.
Part # Size
51405CP ½” 50 17
51407CP ¾” 25 19
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
This special ange is designed to prevent torque change
on CPVC pipes exiting through walls to which valves or
threaded transition ttings are attached. The “torque ange” is welded to the pipe and fastened to the wall
with screws thereby preventing twisting motion being
transmitted to concealed joints.
Part # Size
530131 ½” (C) 10 1
53013 ½” 10 50 2
(C) = Carded
Pkg
Qty
Box
Qty
Box
Wt
CPVC FITTINGS
49
Page 54
LINE VALVE (SLIP X SLIP)
BOILER DRAIN (MIP X MHT)
This unique valve employs the globe valve principle and is manufactured of high temperature thermoplastics. It
500 SERIES
is designed to solvent weld to CPVC tubing. This valve employs “Street/Socket” feature which allows it to be used with ½”, ¾”, and 1” CPVC tubing. (2 - ¾” couplings are required to attach the valve to ¾” CPVC tubing. 2 - 1” couplings are required to attach the valve to 1” CPVC tubing).
Part # Size
530151 ¾” / ½” (C) 10 3
53015 ¾” / ½” 10 2
530161 ¾” / ½” W/WASTE (C) 5 2
53016 ¾” / ½” W/WASTE 10 2
53031 1” / ¾” 10 3
53032 1” / ¾” W/WASTE 10 3
Pkg
Qty
Box
Qty
BALL VALVES (SLIP X SLIP)
Box
Wt
For use with female threaded tting pipe in cold or hot
water up to 150 PSI @ 180ºF. (¾” hose thread) PTFE
thread tape is recommended for threaded joints.
Part # Size
53028 ½” 12 2
53029 ¾” 12 2
Pkg
Qty
Box
Qty
Box
Wt
ANGLE BOILER DRAIN (MIP X MHT)
For use with female threaded tting in cold or hot water up
to 150 PSI @ 180ºF. (¾” hose thread) PTFE thread tape is
recommended for threaded joints.
Part # Size
52033 ½” 12 3
52034 ¾” 12 3
Pkg
Qty
Box
Qty
Box
Wt
HOSE BIBB (MIP X MHT)
These ball valves are full ow valves with PTFE seal and
quarter turn operation. For use with CPVC pipe.
Part # Size
57305 ½” 10 2
57307 ¾” 5 3
Pkg
Qty
Box
Qty
BOILER DRAIN (SLIP X MHT)
Solvent welds to CPVC pipe for hot and cold water. (¾” hose threads)
Part # Size
52028 ½” 12 3
52029 ¾” 12 3
Pkg
Qty
Box
Qty
CPVC FITTINGS
Box
Wt
Box
Wt
For use with female threaded tting pipe in cold or hot
water up to 150 PSI @ 180ºF. (¾” hose thread) Do not use other material compounds unless approved by the manufacturer. PTFE thread tape is recommended for
threaded joints.
Part # Size
53022 ½” 12 3
53023 ¾” 12 3
Pkg
Qty
Box
Qty
Box
Wt
STRAIGHT VALVE (CPVC X NPSM)
Solvent welds directly to CPVC tubing and adapts to both metal and plastic Siamese Supply Tubes.
Part # Size
53020 ½” 25 100 14
Pkg
Qty
Box
Qty
Box
Wt
50
(C) = Carded
Genova Products
Page 55
ANGLE VALVE (SLIP X SLIP)
500 SERIES
WING ELBOW (SLIP X SLIP)
The unique valve provides for changing direction in piping
as well as providing a controlled line ow.
Part # Size
530661 ½” (C) 10 2
53066 ½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
WASHER HOSE VALVE (SLIP X MHT)
Solvent welds directly to ½” CPVC tubing and adapts
to female hose couplings. Most often used in conjunction
with a wing elbow (#53056) to supply water to automatic washing machines.
Part # Size
530671 ½” (C) 10 2
53067 ½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
SILLCOCK (SLIP X MHT)
This elbow is used to change direction in piping and
features lugs for fastening. Often used in conjunction with
Washer Hose Valve (#530671) for hooking up to automatic clothes washers as well as fabricating water supply piping stub outs for toilet installation. Sometimes called a “Drop Ear” elbow.
Part # Size
530561 ½” (C) 5 1
53056 ½” 25 2
Pkg
Qty
Box
Qty
Box
Wt
SPECIAL FEMALE WING ELBOW (SLIP X FIP)
This elbow adapts from ½” CPVC to ½” male metal pipe threads and features lugs for fastening. A special elastomeric gasket ensures a leakproof seal. Used on tub and shower faucets to adapt from the ½” CPVC riser to the chrome shower arm. Sometimes called a “Drop Ear” elbow.
Hand tighten only! This tting seals by means of a gasket
and the use of joint compound or PTFE thread tape is not necessary or recommended.
Can be solvent welded directly to ¾” CPVC water supply line or ½” CPVC pipe with a bushing (#50275). Also adapts to copper tubing from CPVC pipe by using Genogrip adapter (#53085).
Part # Size
530941 ¾” (C) 5 2
Pkg
Qty
Box
Qty
Box
Wt
WINGED TEE (SLIP X SLIP X SLIP)
Used on lavatory and sink “rough-ins” instead of conventional tee, providing a more rigid “rough-in” and eliminates the need for tubing hangers. Also provides for rigid mounting of washer valves for automatic washer hose hook-ups at laundry tray.
Part # Size
53058 ½” 25 50 2
Pkg
Qty
Box
Qty.
Box
Wt
Part # Size
530551 ½” (C) 10 2
53055 ½” 25 2
Pkg
Qty
Box
Qty
Box
Wt
HOSE COUPLER (SLIP X FHT)
Used to adapt male hose threads to CPVC.
This tting seals by means of a gasket and the use of joint
compound or PTFE thread tape is neither necessary nor recommended.
Part # Size
53124 ¾” 10 50 3
Pkg
Qty
Box
Qty
Box
Wt
CPVC FITTINGS
Genova Products
(C) = Carded
51
Page 56
MALE HOSE ADAPTER (SPIGOT X MHT)
CPVC TRANSITION ADAPTER (SPIGOT)
This adapter solvent welds directly into ½” CPVC tting
socket and adapts to female hose coupling.
500 SERIES
Part # Size
53128 ½” St. x ¾” 10 400 10
Pkg
Qty
Box
Qty
90° SWIVEL ELBOW (SLIP X FEMALE NPSM)
Allows a direct 90º connection between CPVC tubing and male running threads on faucet. Has a cone washer inside female end to achieve seal.
Part # Size
54935 ½” 50 3
Pkg
Qty
Box Qty
Box
Wt
90° MALE SWIVEL ELBOW
Box
Wt
Used in conjunction with a brass compression tting to transition to a CPVC tting. Replaces the ferrule.
Part # Size
50465 ½” 10 250 5
50467 ¾” 10 50 2
Pkg
Qty
Box
Qty
Box
Wt
COMPRESSION COUPLING (COMP. X COMP.)
Used to join two pieces of CPVC or other copper tube
sized pipe. Most often used for in-line repairs.
Part # Size
57105 ½” 20 5
57107 ¾” 20 6
Pkg
Qty
Box
Qty
Box
Wt
Provides a 90º change in direction of the male running threads on a faucet. Has a cone washer inside female end to achieve seal.
Part # Size
54945 ½” 50 5
Pkg
Qty
Box
Qty
SWIVEL ADAPTER COUPLING
Allows a direct connection between CPVC tubing and male running threads on faucet. Has a cone washer inside female end to achieve seal.
Part # Size
CPVC FITTINGS
54950 ½” 50 3
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
UNION (SLIP X SLIP)
This union solvent welds directly to CPVC pipe and provides a method for future disassembly of piping without cutting.
Part # Size
530211 ½” (C) 10 2
53021 ½” 10 20 3
530261 ¾” (C) 10 3
53026 ¾“ 10 2
Pkg
Qty
Box
Qty
Box
Wt
52
(C) = Carded
Genova Products
Page 57
TRANSITION UNION (SLIP X BRASS FIP)
500 SERIES
TRANSITION UNION
(SLIP X BRASS COMPRESSION)
This special tting is designed to compensate for the dierence in coecients of expansion which exist between
CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. PTFE thread tape is the accepted method
of sealing pipe threads on CPVC ttings. Do not use
other materials or compounds unless approved by the manufacturer.
Part # Size
530351Z ½” (C) 10 3
53035Z ½” 10 20 4
530401Z ¾” (C) 5 2
53040Z ¾“ 10 3
Pkg
Qty
Box
Qty
Box
Wt
TRANSITION UNION (SLIP X BRASS MIP)
This special tting is designed to compensate for the dierence in coecients of expansion which exist between
CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. PTFE thread tape is the accepted
method of sealing pipe threads on CPVC ttings. Do not
use other materials or compounds unless approved by the manufacturer.
Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Uses replaceable brass ferrule. Not for use with PEX tubing.
Part # Size
53034Z ½” 20 6
53044Z ¾” 10 5
Pkg
Qty
Box
Qty
Box
Wt
DROP EAR ELBOW (SLIP X BRASS FIP)
Used to transition from metal male pipe threads to CPVC. Provides for rigid installation by mounting elbow to wall. Usually used for shower arm or washer hose valve installation.
Part # Size
53071Z ½” 20 8
Pkg
Qty
Box
Qty
Box
Wt
1 PIECE DESIGN
DROP EAR ELBOW (SLIP X BRASS FIP)
Part # Size
530451Z ½” (C) 10 4
53045Z ½” 10 20 5
530501Z ¾” (C) 5 2
53050Z ¾“ 10 4
Pkg
Qty
Box
Qty
Box
Wt
TRANSITION UNION (SLIP X BRASS SLIP)
Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Remove CPVC component and gasket before making sweat connection.
Part # Size
53033Z ½” 20 3
53043Z ¾” 20 6
Pkg
Qty
Box
Qty
Box
Wt
Used to transition from metal male pipe threads to CPVC. Provides for rigid installation by mounting elbow to wall. Usually used for shower arm or washer hose valve installation.
Part # Size
57072Z ½” 20 4
Pkg
Qty
Box
Qty
Box
Wt
1 PIECE DESIGN
TRANSITION ADAPTER (SLIP X BRASS MIP)
Used to transition from metal female pipe threads to CPVC.
Part # Size
57605Z ½” 25 4
57607Z ¾” 20 5
Pkg
Qty
Box
Qty
Box
Wt
CPVC FITTINGS
Genova Products
(C) = Carded
53
Page 58
1 PIECE DESIGN
TRANSITION ADAPTER (SLIP X BRASS FIP)
Used to transition from metal male pipe threads to CPVC.
500 SERIES
Part # Size
57905Z ½” 25 4
57907Z ¾” 20 5
Pkg
Qty
Box
Qty
TRANSITION UNION (SLIP X BRASS FIP)
Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping systems.
Box
Wt
Part # Size
53373Z ½” 20 4
53375Z ¾” 20 8
Pkg
Qty
Box
Qty
Box
Wt
TRANSITION UNION (SLIP X BRASS MIP)
Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping systems.
Part # Size
53374Z ½” 20 4
53376Z ¾” 20 7
53037Z ½" x ¾" 20 5
Pkg
Qty
Box
Qty
Box
Wt
NO LEAD CPVC FITTINGS
54
Genova Products
Page 59
Universal Fittings are copper tube size products (CTS) used in hot and cold potable water distribution systems in residential, marine, and RV applications. All sizes listed are nominal, which are approximately the same as the inside diameter (I.D.). The outside diamteter (O.D.) of CTS tubing is the nominal size plus 1/8”.
Nominal Size ¼” ³/8” ½” ¾”
Outside Diameter ³/8” ½”
5
/8”
7
/8”
500 SERIES
Universal Fittings
Meets ASTM D3309
200 PSI @ 73°F & 100 PSI @ 180°F
NSF Listed
• Avoid installation where product will be exposed to excessive sunlight.
• Universal Fittings
- Leak-proof mechanical joints
- Hand-tighten only!
- Connects to copper, CPVC, and other copper tube size products
- Note the order in which each of the component parts are installed. Be sure all parts are present and in this order before installing.
UNIVERSAL FITTINGS
Plastic Nut
Gripper Ring
Body Spacer
O-Ring
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
55
Page 60
COUPLING
REDUCING FEMALE ADAPTER
Designed to join PEX, copper, or CPVC tubing.
Part # Size
500 SERIES
541031 ¼” (C) 5 1
541051 ½” (C) 5 1
54105 ½” 10 20 2
541071 ¾” (C) 5 1
54107 ¾” 10 20 3
Pkg
Qty
REDUCING COUPLING
Designed to join PEX, copper, or CPVC tubing.
Part # Size
541531 ½” x ¼” (C) 5 1
54153 ½” x ¼” 10 20 2
Pkg
Qty
SPECIAL FEMALE ADAPTER (FIP)
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Designed to adapt from metal male pipe thread to PEX, copper, or CPVC tubing. Connects Water Softeners to in home plumbing supply.
Hand tighten only! This tting seals by means of a gasket
and the use of joint compound or PTFE thread tape is neither necessary nor recommended.
Part # Size
54310 1” x ¾” 10 20 3
543101 1” x ¾” 5 20 3
Pkg
Qty
Box
Qty
Box
Wt
MALE ADAPTER (MIP)
Designed to adapt from metal female pipe thread to PEX, copper, or CPVC tubing on the COLD WATER SIDE ONLY of a hot and cold water supply system. Where hot or changing temperatures are likely to be encountered,
utilize a short metal nipple in conjunction with a Genova
Universal Fitting Special Female Adapter. PTFE tape is the accepted method of sealing pipe threads or CPVC
ttings. Do not use other materials or compounds unless specically approved by the manufacturer.
Part # Size
544051 ½” (C) 5 1
54405 ½” 10 20 2
544071 ¾” (C) 5 1
54407 ¾” 10 20 2
Pkg
Qty
Box
Qty
Box
Wt
Designed to adapt from metal male pipe thread to PEX, copper, or CPVC tubing.
Hand tighten only! This tting seals by means of a gasket
and the use of joint compound or PTFE thread tape is neither necessary nor recommended.
Part # Size
543051 ½” (C) 5 1
54305 ½” 10 20 2
543071 ¾” (C) 5 1
54307 ¾” 10 20 2
Pkg
Qty
UNIVERSAL FITTINGS
56
(C) = Carded
Box
Qty
Box
Wt
Used to change direction in piping and is designed to join
PEX, copper, or CPVC tubing.
Part # Size
547051 ½” (C) 5 1
54705 ½” 10 20 3
547071 ¾” (C) 5 1
54707 ¾” 10 2
Genova Products
90° ELBOW
Pkg
Qty
Box
Qty
Box
Wt
Page 61
90° SWIVEL ELBOW
500 SERIES
LINE VALVE
Allows a direct 90º connection between 5/8” O.D. PEX, copper, or CPVC tubing and male running threads on faucet. Has a cone washer inside female end to achieve seal.
Hand tighten only! This tting seals by means of a gasket
and the use of joint compound or PTFE thread tape is neither necessary nor recommended.
Part # Size
54905 ½” 10 20 3
Pkg
Qty
Box
Qty
Box
Wt
TEE
This tting is used to provide a branch from a main line and is designed to join to PEX, copper, or CPVC tubing.
Part # Size
545051 ½” (C) 5 1
54505 ½” 10 2
545071 ¾“ (C) 5 2
54507 ¾” 10 3
Pkg
Qty
Box
Qty
Box
Wt
The unique valve mechanically joins water supply tubing
utilizing a special locking ring and elastomeric seal. It can
be used to join PEX, copper or CPVC tubing.
Part # Size
540051 ½” (C) 5 2
54005 ½” 10 3
540071 ¾” (C) 5 2
54007 ¾” 10 4
Pkg
Qty
Box
Qty
Box
Wt
STRAIGHT SUPPLY VALVE
Adapts mechanically and is used where toilet, vanity or sink
water supply piping comes through the oor. Designed to join PEX, copper, or CPVC tubing.
Part # Size
530301 ½” x ¼” (C) 10 3
53030 ½” x ¼” 10 2
Pkg
Qty
Box
Qty
Box
Wt
REDUCING TEE
Used to provide a branch from a main line and is designed
to join PEX, copper, or CPVC tubing.
Part # Size
545751 ¾” x ¾” x ½” (C) 5 2
54575 ¾” x ¾” x ½” 10 3
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
(C) = Carded
UNIVERSAL FITTINGS
57
Page 62
ANGLE SUPPLY VALVE
GENOGRIP™ STREET ADAPTER
(SPIGOT X TUBING)
Adapts mechanically and is used where toilet, vanity or sink water supply piping comes through the wall. Designed
500 SERIES
to join PEX, copper, or CPVC tubing.
Part # Size
530651 ½” x ¼” (C) 10 3
53065 ½” x ¼” 10 2
Pkg
Qty
Box
Qty
SPECIAL FEMALE WING ELBOW
Mechanically joins ½” water supply piping to male pipe
threads. A special elastomeric gasket ensures a leakproof seal. Usually used for a shower arm connection.
Hand tighten only! This tting seals by means of a gasket
and the use of joint compound or PTFE thread tape is not necessary or recommended.
Part # Size
540551 ½” (C) 5 1
54055 ½” 10 20 3
Pkg
Qty
Box
Qty
REDUCING GENOGRIP™ ADAPTER
(SLIP X TUBING)
Box
Wt
Box
Wt
These patented adapters solvent weld directly into
standard ttings and adapt mechanically to both PEX
tubing and copper tubing by utilizing a special metal
gripper ring supplied with the tting. These ttings can be used in conjunction with CPVC ttings to create an unlimited range of ttings to connect to any type of water
supply tubing.
Part # Size
530751 ½” (C) 10 2
53075 ½” 25 2
530851 ¾” (C) 10 2
53085 ¾” 10 20 2
Pkg
Qty
Box
Qty
Box
Wt
REDUCING GENOGRIP™ STREET ADAPTER
(SPIGOT X TUBING)
Allows any tting hub to be reduced to accept PEX,
copper or CPVC tubing.
Part # Size
540031 ½” x ¼"(C) 10 1
53070 ½" x ¼” 25 50 2
540021 ½" x ³/8” 10 2
540011 ¾" x ½” 10 2
Pkg
Qty
Box
Qty
Box
Wt
Solvent welds directly onto ½" CPVC tubing and adapts mechanically to ³/8" O.D. Pex tubing or copper tubing. Most often used to adapt from ½" CPVC tubing risers
through oor ³/8" O.D. closet and/or lavatory riser tubes.
Can also be used with metal risers.
Part # Size
530101 ½” x ¼" (C) 10 1
53010 ½” x ¼" 25 50 3
UNIVERSAL FITTINGS
58
(C) = Carded
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
GENOGRIP™ ANGLE ADAPTER
(SLIP X TUBING)
Solvent welds directly onto ½" CPVC tubing and adapts mechanically to ³/8" O.D. Pex tubing or copper tubing. Most often used to adapt from ½" CPVC tubing risers
through oor ³/8" O.D. closet and/or lavatory riser tubes.
Can also be used with metal risers.
Part # Size
53060 ½” x ¼" 10 50 3
Pkg
Qty
Box
Qty
Box
Wt
Page 63
HOSE COUPLER METAL GRIPPER RINGS
Adapts male hose threads to CPVC, Pex or copper tubing.
500 SERIES
Part # Size
54124 ¾” 10 20 2
Pkg
Qty
Box
Qty
Box
Wt
ICE MAKER KIT
5
Kit consists of for use in hooking up any appliance served by ¼" O.D. tubing.
Part # Size
54064 ½” 1 10 3
/8" O.D. tee and ¼" O.D. valve assembly
Pkg
Qty
Box
Qty
Box
Wt
REDUCING ASSEMBLY
Available for replacement purposes in Genova's Universal
ttings. 2 gripper rings of each size are included in each
bags. (¼", ½", ¾" I.D.)
Part # Size
540001 10 20 1
Pkg
Qty
Box
Qty
Box
Wt
TUBING HANGERS
(Note: ORDER BY THE BAG)
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Genova recommends using #8 x 1" screws which do not require pre-drilling.
Part # Size
521051 ½” 10/bag (C) 10 1
52105 ½” 25/bag 1 25 5
521071 ¾” 10/bag (C) 10 2
52107 ¾” 25/bag 1 25 10
Pkg
Qty
Box
Qty
(legths)
Box
Wt
Reduces a ½" I.D./5/8” O.D. tting to a ³/8” I.D. /½" O.D. fitting.
Includes:
- Nut Spacer
- Gripper Ring
- Body Spacer
- O-ring
- Back-up Ring
Part # Size
540091 ½" x ³/8” (C) 10 1
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
TUBING STRAPS
(Note: ORDER BY THE BAG)
Incorporates a special design which allows for pipe expansion. Can be used on copper, CPVC, and PEX tubing. Genova recommends using #6 x 1" screws which do not require pre-drilling.
Part # Size
52115 ½” 25/bag 1 25 4
52117 ¾” 25/bag 1 25 5
Pkg
Qty
(C) = Carded
Box
Qty
(legths)
Box
Wt
UNIVERSAL FITTINGS
59
Page 64
WATER HAMMER MUFFLER
500 SERIES
A permanent replacement for conventional air chambers that waterlog in a short period of time. Eliminates potential damage to water supply pipes caused by water hammer. Adapts to all water supply piping systems, plastic or metal.
Part # Size
53090 ½" 10 8
Pkg
Qty
PLASTIC TUBING CUTTERS
Box
Qty
Box
Wt
CLOSET POLY RISER
A direct replacement for exible copper risers. Easily
installed, they can be cut with a knife and are virtually impossible to kink. Can be utilized with standard ³/
brass compression, are ttings or patented GenoGrip
adapters. Ferrule included on each tube for use with metal
compression ttings.
Part # Size
530801 ¼" x 12" (C) 10 100 10
53080 ¼" x 12" 10 50 2
530821 ¼" x 20" (C) 10 100 12
53082 ¼" x 20" 10 50 3
Pkg
Qty
Box
Qty
8
Box
Wt
LAVATORY POLY RISER
"
Easy-to-use cutter for plastic pipe with a heat treated blade. Ideal for CPVC or PEX tubing.
Part # Size
534991 (C) 5 4
53499 5 4
Pkg
Qty
Box
Qty
Box
Wt
TUBING CUTTER REPLACEMENT BLADES
For use with Part #534991 or 53499 Genova Plastic Tubing Cutter.
Part # Size
534961 (C) 10 2
Pkg
Qty
Box
Qty
Box
Wt
A direct replacement for exible copper risers. Easily
installed, they can be cut with a knife and are virtually impossible to kink. Can be utilized with standard ³/8" brass
compression, are ttings or patented GenoGrip adapters.
Ferrules are included on each tube for use with metal
compression ttings.
* 2 per Card
Part # Size
530841* ¼" x 12" (C) 10 100 13
53084 ¼" x 12" 10 50 2
530861* ¼" x 20" (C) 10 100 16
53086 ¼" x 20" 10 50 3
530881* ¼" x 36" (C) 5 50 11
53088 ¼" x 36" 10 50 5
ID/OD Chart
Nominal Size ¼” ³/8 ½” ¾”
Outside Diameter ³/
8 ½”
Pkg
Qty
5
Box
Qty
/8
Box
Wt
7
/8
SPECIALTY ITEMS FOR CPVC & UNIVERSAL FITTINGS
60
Genova Products
Page 65
Sch. 30 (3.25" O.D.) DWV pipe and ttings are used in drain, waste, and vent applications and are designed to t inside a 2" x 4" wall.
Sch. 30 DWV Pipe
Solid Wall meets ASTM D2949
Cellular Core meets ASTM F1488
NSF Listed
600 SERIES SCH. 30 PVC-DWV PIPE & FITTINGS
Sch.30 DWV Fittings
NSF Listed
• Permitted under the International Plumbing Code (IPC) and International Residential Code (IRC).
Solvent weld joints.
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
61
Page 66
SCH. 30 PVC-DWV PIPE
600 SERIES
Part # Size
60031 3" x 10' 5 75 42
60032 3" x 20' 5 75 83
Bdl Qty
(Lgths)
(Lgths)
SCH. 30 PVC-DWV CELLULAR CORE PIPE
Skid
Qty
Bdl
Wt
(Lbs)
REPAIR COUPLING (NO STOP) (HUB X HUB)
Furnished without center stop so that stationary lengths of pipe can be spliced together.
Part # Size
60133 3" 20 8
Pkg
Qty
Box
Qty
Box
Wt
CAP (HUB)
Used for permanently or temporarily capping pipe.
Note: Be sure to order by the length.
Bdl
Part # Size
Qty
(Lgths)
60031F 3" x 10' 5 75 32
60032F 3" x 20' 5 75 64
Skid
Qty
(Lgths)
COUPLING (HUB X HUB)
Used to join straight lengths of pipe.
Part # Size
60130 3" 20 6
Pkg
Qty
Box
Qty
REDUCING COUPLING (HUB X HUB)
Bdl
Wt
(Lbs)
Box
Wt
Part # Size
60153 3” 20 6
Pkg
Qty
Box
Qty
REDUCING BUSHING (SPIGOT X HUB)
Inserts into tting hub to reduce to smaller pipe size.
SCH. 30 X DWV
Part # Size
60231 3" x 1½" 20 7
60232 3" x 2" 20 8
DWV X SCH. 30
Part # Size
60243 4" x 3" 10 6
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
Used to increase or reduce pipe sizes.
Part # Size
60131 3" x 1½" 20 7
60132 3" x 2" 20 6
60143 4" x 3" 20 16
SCH.30 PVC-DWV PIPE & FITTINGS
62
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
SCH. 40 TO SCH. 30 BUSHING (HUB X SPIGOT)
This ush sleeve adapts a Sch. 40 I.P.S. (700 Series) tting
hub to Sch. 30 (600 Series) pipe size.
Part # Size
65330 3" 20 3
Pkg
Qty
Box
Qty
Box
Wt
Page 67
FEMALE ADAPTER (HUB X FIP)
22½° ELBOW (HUB X HUB)
600 SERIES SCH. 30 PVC-DWV FITTINGS
Adapts to standard male pipe threads. PTFE thread tape is
recommended for threaded joints.
Part # Size
60330
3"
Pkg.
Qty.
Box
Qty
20 10
Box
Wt
MALE ADAPTER (HUB X MIP)
Adapts to standard female pipe threads. PTFE thread tape
is recommended for threaded joints.
Part # Size
60430 3" 20 7
Pkg.
Qty.
Box
Qty
Box
Wt
SEWER PIPE ADAPTER
Used to change direction in piping. Sometimes called a "Sixteenth Bend".
Part # Size
60830 3" 20 10
Pkg.
Qty.
Box
Qty
Box
Wt
45° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called an "Eighth Bend".
Part # Size
60630
3"
Pkg.
Qty.
Box
Qty
20 10
Box
Wt
45° STREET ELBOW (HUB X SPIGOT)
Adapts 3" Sch. 30 pipe to 4" sewer pipe (400 Series).
Part # Size
61543 4" x 3" 20 9
Pkg
Qty
Box
Qty
Box
Wt
CAST IRON PIPE SPIGOT ADAPTER
(HUB X HUB)
This tting adapts 3" Sch. 30 pipe to 3" cast iron spigot. Can be joined to cast iron with oakum and poured lead or
lead substitute.
Part # Size
61730 3" x 3" C.I. 10 5
Pkg
Qty
Box
Qty
Box
Wt
Used to change direction in piping. Sometimes called a "Street Eighth Bend".
Part # Size
62730
3"
Pkg.
Qty.
Box Qty
20 9
Box
Wt
60° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Sixth Bend".
Part # Size
60930
3"
Pkg.
Qty.
Box Qty
20 12
Box
Wt
Genova Products
63
Page 68
90° SANITARY ELBOW (HUB X HUB)
STANDARD DOUBLE WYE (ALL HUB)
Used to change direction in piping. Sometimes called a
600 SERIES
"Quarter Bend".
Part # Size
62830 3" 20 14
Pkg.
Qty.
Box
Qty
90° SANITARY STREET ELBOW
(HUB X SPIGOT)
Used to change direction in piping. Sometimes called a "Street Quarter Bend".
Part # Size
62936 3" 20 14
Pkg.
Qty.
Box
Qty
WYE (HUB X HUB X HUB)
Box
Wt
Box
Wt
Used to bring two branch lines into a horizontal drain pipe.
Part # Size
63430
3"
Pkg Qty
Box Qty
Box
10 16
Wt
REDUCING DOUBLE WYE
Used to bring two branch lines into a horizontal drain
pipe. Branch inlets are 2" socket conguration to accept 2" pipe. The inlet is constructed to accept a 2" tting over
its outside diameter or a 1½" pipe into its inside diameter.
Pkg
Part # Size
63431 3" x 3" x 1½"/2" x 1½"/2" 10 10
Qty
Box
Qty
Box
Wt
Used when connecting a branch line into a horizontal
drain pipe. Also, used in conjunction with a "Twist-Lok"
plug to provide a cleanout in a drain pipe.
Part # Size
61030 3" 20 19
Pkg.
Qty.
Box
Qty
REDUCING WYE (HUB X HUB X HUB)
Used when connecting a branch line into a horizontal
drain pipe. Also, used in conjunction with a "Twist-Lok"™
plug to provide a cleanout in a drain pipe.
Part # Size
61031 3" x 3" x 1½" 20 15
61032 3" x 3" x 2" 20 16
SCH.30 PVC-DWV FITTINGS
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
SANITARY TEE (HUB X HUB X HUB)
Used to connect a branch line into a vertical drain pipe.
Part # Size
61130 3" 20 22
Pkg.
Qty.
Box
Qty
Box
Wt
TEST TEE W/PLUG (HUB X HUB X FIP)
Installs in vertical drain pipes to provide a cleanout opening
close to the oor and ush with the nished wall.
Part # Size
61330 3" 1 10 10
Pkg
Qty
Box
Qty
Box
Wt
64
Genova Products
Page 69
600 SERIES SCH. 30 PVC-DWV FITTINGS
REDUCING SANITARY TEE
(HUB X HUB X HUB)
Used to connect a reducing branch line into a vertical pipe drain.
Part # Size
61131 3" x 3" x 1½" 20 12
61132 3" x 3" x 2" 20 17
Pkg
Qty
Box
Qty
Box
Wt
DOUBLE SANITARY TEE (ALL HUB)
Used to bring two branch lines into a vertical drain pipe.
Part # Size
63530 3" 10 16
Pkg
Qty
Box
Qty
Box
Wt
FITTING CLEANOUT W/THREADED PLUG
Solvent welds into tting hub to provide access to piping. PTFE thread tape is recommended for threaded joints.
Part # Size
61630 3" 20 10
Pkg.
Qty.
Box
Qty
Box
Wt
"POP-TOP" CLOSET FLANGE
Solvent welds over 3" Sch. 30 pipe. Unique "Pop-Top" feature prevents debris from entering plumbing system prior to setting the toilet. Used for mounting toilet base to drain.
Part # Size
65134 4" x 3" HUB 20 14
Pkg.
Qty.
Box
Qty
Box
Wt
REDUCING DOUBLE SANITARY TEE
(ALL HUB)
Used to bring two branch lines into a vertical drain pipe.
Part # Size
63531 3" x 3" x 1½" x 1½" 10 10
63532 3" x 3" x 2" x 2" 10 10
Pkg
Qty
Box
Qty
Box
Wt
FITTING CLEANOUT BODY (SPIGOT X FIP)
Solvent welds into tting hub and adapts to male threaded
plug. PTFE thread tape is recommended for threaded
joints.
Part # Size
61629 3" 20 7
Pkg.
Qty.
Box
Qty
Box
Wt
CLOSET FLANGE W/METAL RING
Solvent welds directly into 3" Sch. 30 tting hub. This ange has an adjustable metal ring which allows for easier
toilet alignment.
Part # Size
65139 4" x 3" SPIGOT 20 14
Pkg.
Qty.
Box
Qty
Box
Wt
CLOSET FLANGE W/METAL RING
Solvent welds over 3" Sch. 30 pipe. This ange has an adjustable metal ring which allows for easier toilet
alignment and is used for mounting toilet base to drain.
Part # Size
65150 4" x 3" HUB 10 8
Pkg.
Qty.
Box
Qty
Box
Wt
Genova Products
65
Page 70
SADDLE (STREET/SOCKET DESIGN)
600 SERIES
Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The
inlet is constructed to accept a 2" tting over its outside
diameter or a 1½" pipe into its inside diameter.
Part # Size
61231 3" x 1½"/2" 20 6
Pkg
Qty
Box
Qty
TWIST-LOK™ PLUG (PATENT NO. 3,677,301)
Box
Wt
SPECIAL WASTE & VENT FITTING
(SINGLE CONFIGURATION)
This special stack tting provides for the hookup and
venting of a complete bathroom. Each unit includes a
ush branch plug to enable utilizing the tting in a right
or left hand drain situation. Branch inlets are 2" socket
congurations to accept 2" pipe. Bushings (Part #70221)
are provided to accommodate 1½" pipe.
Part # Size
67530 3" x 1½"/2" w/3" CAP 1 5 13
Pkg
Qty
Box
Qty
Box
Wt
SPECIALTY ITEMS
This unique Genova way of providing an easily removable
closure at any tting hub. A patented Genova system
feature.
Part # Size
61873 3" 20 5
Pkg
VINYL "HUB-FIT" FLOOR STRAINER
Prevents debris from entering a drain opening on the oor. Fits ush into any tting hub.
Qty
Box
Qty
Box
Wt
SPECIAL WASTE & VENT FITTING
(DOUBLE CONFIGURATION)
This special stack tting provides for the hookup and
venting of all drains from two complete bathrooms located
back to back. Each unit includes two ush branch plugs to enable utilizing the tting in a right or left hand drain situation. Branch inlets are 2" socket congurations to
accpet 2" pipe. Bushings (Part #70221) are provided to accommodate 1½" pipe.
Part # Size
67930
3" x 1½"/2" w/3"
CAP
Pkg
Box
Qty
Qty
1 5 15
Box
Wt
Part # Size
69230 3" 20 5
Pkg
Qty
Box
Qty
SCH.30 PVC-DWV FITTINGS
66
Box
Wt
Genova Products
Page 71
Poly Vinyl Chloride (PVC) DWV pipe and ttings are used for drain, waste, and vent
applications.
Sch. 40 PVC DWV Pipe
Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665) applications
NSF Listed
Sch. 40 Cellular Core PVC DWV Pipe
Meets ASTM F891
NSF Listed
DR-24 DWV Pipe
Meets ASTM F1488
Use with Sch. 40 DWV Fittings
NSF Listed
700 SERIES PVC-DWV PIPE & FITTINGS
Sch.40 DWV Fittings
Meets ASTM D2665
NSF Listed
• Pipe diameters are the same as iron pipe. (IPS = Iron Pipe Size)
Solvent weld joints
Sch. 40 PVC, meeting ASTM D 2665 or F 891, is permitted by all major model plumbing codes. DR-24 pipe, meeting ASTM F1488, is permitted by the International Plumbing Code (IPC) and International Residential Code (IRC).
Solvent welding vinyl pipe and ttings is a permanent process. To eliminate costly errors, Genova pipe features a plumb line as a reference mark relative
to the degree marks on Genova ttings.
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
Genova Products
67
Page 72
SCH. 40 PVC-DWV PIPE
DR-24 PVC-DWV PIPE
Note: Be sure to order by the length not by the foot.
Note: Be sure to order by the length not by the foot.
Bdl
Part # Size PSI
700 SERIES
70011
70012
70021
70022
70031
70032
70032B
70041
70041B
70042
70042B
70061
70062
1½” x 10’
1½” x 20’
2" x 10'
2" x 20'
3" x 10'
3" x 20'
3" x 20'
4" x 10'
4" x 10'
4" x 20'
4" x 20'
6" x 10'
6" x 20'
Belled
Belled
Belled
330 5 180 27
330 5 90 53
280 5 140 35
280 5 70 70
260 5 75 72
260 5 50 144
260 3 48 86
220 3 54 61
220 3 54 61
220 3 36 122
220 3 36 124
180 1 24 37
180 1 24 73
Qty
(lgths)
SCH. 40 PVC-DWV CELLULAR CORE PIPE
Note: Be sure to order by the length not by the foot.
Bdl
Part # Size
70011F 1½” x 10’ 5 180 18
70012F 1½” x 20’ 5 90 36
70021F 2" x 10' 5 140 22
70022F 2" x 20' 5 70 44
70031F 3" x 10' 5 75 53
70031FB 3" x 10' Belled 5 75 53
70032F 3" x 20' 5 50 105
70032FB 3" x 20' Belled 5 50 105
70041F 4" x 10' 3 54 44
70041FB 4" x 10' Belled 3 54 44
70042F 4" x 20' 3 36 88
70042FB 4" x 20' Belled 3 36 88
Qty
(lgths)
Skid
(lgths)
Skid
Qty
(lgths)
Qty
Bdl
Wt
(lbs)
Bdl
Wt
(lbs)
Bdl
Part # Size PSI
Qty
(lgths)
79011 1½” x 10’ 3 180 15
79012 1½” x 20’ 5 90 29
79021 2" x 10' 5 140 24
79022 2" x 20' 5 70 47
79031 3" x 10' 5 75 44
79032 3" x 20' 5 50 87
79041 4" x 10' 3 54 41
79042 4" x 20' 3 36 81
Skid
Qty
(lgths)
Bdl
Wt
(lbs)
COUPLING (HUB X HUB)
Used to join straight lengths of pipe.
Part # Size
70114 1¼" 50 5
70115 1½" 20 100 11
70120 2" 20 100 15
70130 3" 20 11
70140 4" 10 9
70160 6" 1 2
Pkg
Qty
Box
Qty
Box
Wt
REPAIR COUPLING (NO STOP) (HUB X HUB)
Furnished without center stop so that stationary lengths of pipe can be spliced together.
SCH. 40 PVC-DWV CELLULAR CORE
PERFORATED PIPE
Note: Be sure to order by the length not by the foot.
Bdl
Part # Size
70048FB 4” x 10’ Belled 3 54 44
PVC-DWV PIPE & SCH. 40 PVC-DWV FITTINGS
Qty
(lgths)
Skid
Qty
(lgths)
68
Part # Size
Bdl
Wt
(lbs)
70116 1½" 20 100 10
70122 2" 20 100 16
70133 3" 20 10
70144 4" 10 9
Genova Products
Pkg
Qty
Box
Qty
Box
Wt
Page 73
REDUCING COUPLING (HUB X HUB)
700 SERIES
FLUSH REDUCING BUSHING (SPIGOT X HUB)
Used to reduce or increase pipe sizes.
Part # Size
70121 2" x 1½" 20 100 16
70131 3" x 1½" 20 9
70132 3" x 2" 20 9
70142 4" x 2" 20 16
70143 4" x 3" 20 18
70164 6" x 4" 4 9
Pkg
Qty
Box
Qty
CAP (HUB)
Used for permanently or temporarily capping pipe.
Part # Size
70151 1½" 20 100 9
70152 2" 20 100 12
70153 3" 20 9
70154 4" 10 8
70156 6" 1 10 20
Pkg
Qty
Box
Qty
REDUCING BUSHING (SPIGOT X HUB)
Box
Wt
Box
Wt
Adapts 4" tting hub to 3" pipe.
Part # Size
76243 4" x 3" 10 6
Pkg
Qty
Box
Qty
ADAPTER BUSHING
(DWV SPIGOT X S & D HUB)
Adapts Sch. 40 tting hub to sewer pipe.
Part # Size
75340 4" 25 6
Pkg
Qty
Box
Qty
ADAPTER BUSHING
(S & D SPIGOT X DWV HUB)
Adapts Sch. 40 pipe to sewer tting hub.
Part # Size
74243 4" x 3" 20 9
Pkg
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
SCH. 40 PVC-DWV FITTINGS
Inserts into tting hub to reduce to smaller pipe size.
Part # Size
70211 1½" x 1¼" 50 3
70224 2" x 1¼" 10 70 8
70221 2" x 1½" 20 100 8
70231 3" x 1½" 20 8
70232 3" x 2" 20 9
70242 4" x 2" 10 7
70243 4" x 3" 10 6
70264 6" x 4" 1 10 19
Pkg
Qty
Box
Qty
Genova Products
Box
Wt
SEWER PIPE ADAPTER COUPLING
(SEWER HUB X SCH. 40 HUB)
Adapts Sch. 40 pipe to 4" sewer pipe.
Part # Size
71543 4" x 3" 20 12
71544 4" x 4" 10 7
Pkg
Qty
Box
Qty
Box
Wt
69
Page 74
FEMALE ADAPTER (HUB X FIP)
Adapts to standard male pipe threads. PTFE thread tape is
recommended for threaded joints.
700 SERIES
Part # Size
70311 1½" x 1¼" 20 100 11
70314 1¼" 50 6
70315 1½" 20 100 12
70320 2" 20 100 17
70330 3" 20 12
70340 4" 10 9
70360 6" 1 10 20
Pkg.
Qty.
Box
Qty
MALE ADAPTER (HUB X MIP)
Box
Wt
NO-HUB* ADAPTER (HUB X SPIGOT)
Provides a proper method of adapting from no-hub cast iron pipe utilzing the standard no-hub clamp ring. *No-Hub is a registered trademark of the Cast Iron Soil Pipe Institute.
Part # Size
72120 2" 20 100 17
72130 3" 20 8
72140 4" 10 7
Pkg.
Qty.
Box
Qty
Box
Wt
CAST IRON PIPE SPIGOT ADAPTER
(HUB X HUB)
Adapts to standard female pipe threads. PTFE thread tape
is recommended for threaded joints.
Part # Size
70414 1¼" 50 5
70411 1½" x 1¼" 20 100 10
70415 1½" 20 100 9
70420 2" 20 100 14
70430 3" 20 9
70440 4" 10 8
Pkg.
Qty.
Box
Qty
Box
Wt
HUB ADAPTER (SPIGOT X HUB)
Adapts cast iron HUB
to sch. 40 DWV pipe
Can be joined to cast iron with oakum and poured lead or
lead substitute. Bushing (Part # 70232) provided to reduces to 2".
Part # Size
70521 2" x 1½ 20 7
70520 2" x 2" 25 9
70530 3" x 3" 20 16
70543 4" x 3" 20 19
70540 4" x 4" 10 13
Pkg.
Qty.
Box
Qty
Box
Wt
SCH. 40 PVC-DWV FITTINGS
This tting adapts Genova Sch. 40 pipe to 4" cast iron spigot and can be joined to cast iron with oakum and
poured lead or poured lead substitute.
Part # Size
71730 3" 10 9
71740 4" 10 13
Pkg
Qty
Box
Qty
Box
Wt
TRAP ADAPTER (HUB X SLIP JAMNUT)
Utilized to adapt PVC pipe to tubular traps at wall or oor.
Utilizes special washer which seals to either 1½" or 1¼" tubular products, reducing the number of SKU's needed
in inventory. This tting solvent welds over a 1½" DWV
pipe. Sometimes called a Marvel. * Dynamic Duo feature.
Part # Size
72211* 1½" x 1¼"/1½" 20 100 13
72215 1½" x 1½" 20 100 12
Pkg
Qty
Box
Qty
Box
Wt
70
Genova Products
Page 75
FITTING TRAP ADAPTER
(SPIGOT X SLIP JAMNUT)
Adapts PVC tting hub to tubular traps at wall or oor.
Utilizes special washer which seals to either 1½" or 1¼" tubular products, reducing the number of SKU's needed
in inventory. This tting solvent welds into a 1½" DWV tting hub. Sometimes called a Marvel.
* Dynamic Duo feature.
Part # Size
72311* 1½" x 1¼"/1½" 20 100 14
72315 1½" x 1½" 20 100 13
Pkg
Qty
Box
Qty
Box
Wt
FITTING ADAPTER (SPIGOT X MIP)
22½° STREET ELBOW (HUB X SPIGOT)
Used to change direction in piping. Sometimes called a "Street Sixteenth Bend".
Part # Size
75815 1½" 20 100 14
75820 2" 20 4
75830 3" 20 14
75840 4" 10 12
Pkg
Qty
Box
Qty
Box
Wt
45° SANITARY ELBOW (HUB X HUB)
700 SERIES
Adapts tting hub to standard female pipe threads. PTFE thread tape is recommended for threaded joints.
Part # Size
72411 1½" x 1¼" 20 100 9
72415 1½" 20 100 10
72420 2" 20 100 14
Pkg
Qty
Box
Qty
Box
Wt
22½° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Sixteenth Bend".
Part # Size
70815 1½" 20 100 16
70820 2" 20 5
70830 3" 20 16
70840 4" 10 13
70860 6" 5 12
Pkg
Qty
Box
Qty
Box
Wt
Used to change direction in piping. Sometimes called an "Eighth Bend".
Part # Size
70614 1¼" 50 9
73615 1½" 20 100 22
73620 2" 20 100 32
70630 3" 20 20
70640 4" 10 18
70660 6" 1 4
Pkg
Qty
Box
Qty
Box
Wt
45° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called an "Eighth Bend".
Part # Size
70615 1½" 20 100 16
70620 2" 20 100 23
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV FITTINGS
Genova Products
71
Page 76
45° SANITARY STREET ELBOW
(HUB X SPIGOT)
700 SERIES
Used to change direction from a tting hub to a pipe.
Sometimes called a "Street Eighth Bend".
Part # Size
72714 1¼" 50 7
72716 1½" 20 100 20
72720 2" 20 100 31
72730 3" 20 18
72740 4" 10 17
72760 6" 1 3
Pkg
Qty
Box
Qty
Box
Wt
90° SANITARY ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Quarter Bend".
Part # Size
72814 1¼" 50 10
72815 1½" 20 100 23
72820 2" 20 100 37
72821 2" x 1½" 20 100 30
72830 3" 20 24
72840 4" 10 21
72860 6" 1 4
Pkg
Qty
Box
Qty
Box
Wt
45° STREET ELBOW (HUB X SPIGOT)
Used to change direction from a tting hub to a pipe.
Sometimes called a "Street Eighth Bend".
Part # Size
72715 1½" 20 100 15
Pkg
Qty
Box
Qty
Box
Wt
60° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Sixth Bend".
90° LONG SWEEP ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Long Turn Quarter Bend".
Part # Size
73815 1½" 20 100 33
73820 2" 20 80 37
73830 3" 20 28
73840 4" 10 24
Pkg
Qty
Box
Qty
Box
Wt
90° VENT ELBOW (HUB X HUB)
Part # Size
70915 1½" 20 100 20
70920 2" 20 6
70930 3" 20 19
70940 4" 10 16
Pkg
Qty
Box
Qty
SCH. 40 PVC-DWV FITTINGS
72
Box
Wt
Used to change direction in the "dry" portion of vent
piping where water ow is not a consideration. Sometimes
called a "Short Turn Quarter Bend".
Part # Size
70715 1½" 20 100 21
70720 2" 20 6
70730 3" 20 18
Genova Products
Pkg
Qty
Box
Qty
Box
Wt
Page 77
90° SANITARY STREET ELBOW
(HUB X SPIGOT)
Used to change direction in piping. Sometimes called a "Street Quarter Bend".
Part # Size
72906 1¼" 50 9
72916 1½" 20 100 22
72926 2" 20 8
72936 3" 20 22
72946 4" 10 20
72966 6" 5 23
Pkg
Qty
Box
Qty
Box
Wt
90° VENT STREET ELBOW (HUB X SPIGOT)
90° LOWHEEL INLET ELBOW
(HUB X HUB X HUB)
Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe.
Part # Size
73031 3" x 3" x 1½"/2" 20 24
73032 3" x 3" x 2" 20 25
73042 4" x 4" x 2" 15 35
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW W/SIDE INLET
700 SERIES
Used to change direction in "dry" portion of vent piping
where water ow is not a consideration. Sometimes called
a " Short Turn Street Quarter Bend".
Part # Size
72915 1½" 20 100 19
72920 2" 20 6
Pkg
Qty
Box
Qty
Box
Wt
REDUCING CLOSET BEND (HUB X HUB)
Used to change direction in piping as well as size. Usually utilized to convert from 3" horizontal pipe to 4" vertical pipe directly under the toilet.
Part # Size
72834 4" x 3" 20 32
Pkg
Qty
Box
Qty
Box
Wt
REDUCING CLOSET BEND (SPIGOT X HUB)
Used to change direction and size of pipe directly into
tting hub, usually a closet ange directly under a toilet. Works well in tight space applications on second oors.
Part # Size
72934 4" x 3" 20 32
Pkg
Qty
Box
Qty
Box
Wt
Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe. The inlet is
constructed to accept a 2" tting over its outside diameter
or 1½" pipe into its inside diameter.
Part # Size
73131 3" x 3" 1½"/2" 20 24
Pkg
Qty
Box
Qty
Box
Wt
90° DOUBLE ELBOW (HUB X HUB X HUB)
Ideal for "Back to Back" sink or lavatory installations.
Part # Size
70716 1½" 50 14
70722 2" x 1½" x 1½" 20 8
70726 2" 25 12
70736 3" 10 18
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV FITTINGS
Genova Products
73
Page 78
WYE (HUB X HUB X HUB)
REDUCING DOUBLE WYE (ALL HUB)
Used when connecting a branch line into a horizontal
drain pipe. Also, can be used in conjunction with a
700 SERIES
Twist -Lok™ plug to provide a cleanout in a drain pipe.
Part # Size
71014 1¼" 50 18
71015 1½" 25 11
71020 2" 20 13
71030 3" 20 39
71040 4" 5 18
71060 6" 1 7
Pkg
Qty
Box
Qty
REDUCING WYE (HUB X HUB X HUB)
Used when connecting a reducing branch line into a
horizontal drain pipe. Also, can be used in conjunction
with a TwistLok™ plug to provide a cleanout in a drain pipe. * Bushing (Part # 70221) provided to reduce to 1½". Bushing (Part # 70264) provided to reduce to 4".
Part # Size
71021 2" x 2" x 1½" 20 11
71023* 2" x 1½" x 1½" 20 12
71031 3" x 3" x 1½" 20 36
71032 3" x 3" x 2" 20 27
71041* 4" x 4" x 1½" 1 10 22
71042 4" x 4" x 2" 10 21
71043 4" x 4" x 3" 10 28
71064* 6" x 6" x 4" 1 9
Pkg
Qty
Box
Qty
DOUBLE WYE (ALL HUB)
Box
Wt
Box
Wt
Used to bring two branches into a horizontal drain pipe.
Pkg
Box
Part # Size
73421 2" x 2" x 1½" x 1½" 20 12
73431 3" x 3" x 1½" x 1½" 10 14
73432 3" x 3" x 2" x 2" 10 15
73442 4" x 4" x 2" x 2" 5 12
73443 4" x 4" x 3" x 3" 5 19
Qty
Qty
Box
Wt
COMBINATION TEE-WYE (HUB X HUB X HUB)
Required in some plumbing code areas to connect a branch line into a vertical drain pipe instead of conventional tee
tting. Also, used to connect a horizontal branch pipe
approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a "Street Eighth Bend").
Part # Size
72515 1½" 20 12
72520 2" 10 10
72530 3" 10 25
72540 4" 5 25
Pkg
Qty
Box
Qty
Box
Wt
REDUCING COMBINATION TEE-WYE
(HUB X HUB X HUB)
Required in some plumbing code areas to connect a branch line into a vertical drain pipe instead of conventional tee
tting. Also, used to connect a horizontal branch pipe
approaching a horizontal drain pipe on the perpendicular.
Used to bring two branch lines into a horizontal drain pipe.
Part # Size
73415 1½" 20 11
73420 2" 20 15
73430 3" 10 24
73440 4" 5 21
Pkg
Qty
Box
Qty
SCH. 40 PVC-DWV FITTINGS
74
Box
Part # Size
Wt
72521 2" x 2" x 1½" 20 10
72531 3" x 3" x 1½" 10 12
72532 3" x 3" x 2" 10 14
72542 4" x 4" x 2" 10 16
72543 4" x 4" x 3" 5 16
Genova Products
Pkg
Qty
Box
Qty
Box
Wt
Page 79
DOUBLE COMBINATION TEE-WYE (ALL HUB)
Required in some plumbing code areas to connect two branch lines into a vertical drain pipe.
700 SERIES
SANITARY STREET TEE
(SPIGOT X HUB X HUB)
Part # Size
72640 4" - (3 pcs) 2 15
Pkg
Qty
Box
Qty
Box
Wt
SANITARY TEE (HUB X HUB X HUB)
Used when connecting a branch line into a vertical drain pipe.
Part # Size
71114 1¼" 50 13
71115 1½" 20 7
71120 2" 20 11
71130 3" 20 33
71140 4" 10 30
71160 6" 1 6
Pkg
Qty
Box
Qty
Box
Wt
REDUCING SANITARY TEE
Used when connecting a branch line into a vertical drain pipe.
Part # Size
76140 4" 10 27
Pkg
Qty
Box
Qty
Box
Wt
DOUBLE SANITARY TEE (ALL HUB)
Used to bring two branch lines into a vertical drain pipe.
Part # Size
73515 1½" 20 8
73520 2" 15 11
73530 3" 10 19
73540 4" 5 18
Pkg
Qty
Box
Qty
Box
Wt
Used when connecting a branch line into a vertical drain pipe. * Bushing (Part #70221) provided to reduce to 1½".
Part # Size
71121 2" x 2" x 1½" 20 10
71122 2" x 1½" x 2" 20 11
71123 2" x 1½" x 1½" 20 9
71131 3" x 3" x 1½" 20 19
71132 3" x 3" x 2" 20 21
71141* 4" x 4" x 1½" 1 10 17
71142 4" x 4" x 2" 10 16
71143 4" x 4" x 3" 10 22
71164 6" x 6" x 4" 5 24
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
REDUCING DOUBLE SANITARY TEE
(ALL HUB)
Used to bring two reducing branch lines into a vertical drain pipe.
Part # Size
73521 2" x 2" x 1½" x 1½" 15 9
73531 3" x 3" x 1½" x 1½" 10 10
73532 3" x 3" x 2" x 2" 10 13
73542 4" x 4" x 2" x 2" 5 9
73543 4" x 4" x 3" x 3" 10 24
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV FITTINGS
75
Page 80
TEST TEE W/ CLEANOUT PLUG
(HUB X HUB X FIP)
TWO-WAY CLEANOUT TEE
(HUB X HUB X HUB)
700 SERIES
Used at the base of a vertical drain pipe to provide a
cleanout opening ush with the nished wall. PTFE thread tape is recommended for threaded joints.
Pkg
Part # Size
71315 1½" (Threaded) 10 4
71320 2" (Threaded) 10 5
71330 3" (Toe Saver) 10 12
71340 4" (Toe Saver) 10 23
TEST TEE (HUB X HUB X FIP)
Used in conjunction with a threaded plug to provide a
cleanout opening. PTFE thread tape is recommended for
threaded joints.
Part # Size
71416 1½" 10 3
71421 2" 10 5
71431 3" 10 12
71441 4" 10 21
Pkg
Qty
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Used with a vertical pipe. This tting provides for above
ground level access piping.
Part # Size
71633 3" 10 22
71644 4" 5 20
Pkg
Qty
Box
Qty
Box
Wt
WASTE & VENT TEE W/DOUBLE SIDE INLET
(ALL HUB)
Connect 1½" or 2" vent or branch waste piping to a vertical drain pipe and receive discharge of a water closet.
*Inlets constructed to accept 2" tting hub over outside
diameter or a 1½" pipe into their inside diameter.
Pkg
Box
Part # Size
77031*
3" x 3" x 3" x 1½"/2" x 1½"/2"
Part # Size
77042
4" x 4" x 4" x 2" x 2"
Qty
1 10 17
Pkg
Qty
1 5 16
Box
Qty
Qty
Box
Wt
Box
Wt
VENT TEE (HUB X HUB X HUB)
Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where ow characteristics are
not a primary consideration.
Part # Size
71415 1½" 10 3
71420 2" 10 5
71430 3" 10 12
71440 4" 10 21
Pkg
Qty
Box
Qty
SCH. 40 PVC-DWV FITTINGS
76
This tting provides for the connection of 2" vent or
branch waste piping to a vertical drain pipe.
Box
Wt
Part # Size
77132 3" x 3" x 3"x 2" 10 17
Genova Products
SANITARY TEE W/LEFT SIDE INLET
(ALL HUB)
Pkg
Qty
Box
Qty
Box
Wt
Page 81
SANITARY TEE W/RIGHT SIDE INLET
(ALL HUB)
This tting provides for the connection of 2" vent or
branch waste piping to a vertical drain pipe.
Part # Size
77232 3" x 3" x 3"x 2" 10 17
Pkg
Qty
Box
Qty
Box
Wt
FITTING CLEANOUT W/THREADED PLUG
(SPIGOT X FIP)
THREADED PLUG (MIP)
Used to form a removable closure. These threaded plugs
oer a corrosion proof alternative to metal plugs. PTFE thread tape is recommended for threaded joints.
Part # Size
71814 1¼" 100 4
71815 1½" 10 100 5
71820 2" 20 100 7
71830 3" 20 100 17
71840 4" 10 3
71860 6" 10 7
Pkg
Qty
Box
Qty
Box
Wt
700 SERIES
Solvent welds into tting hub to provide access to piping. PTFE thread tape is recommended for threaded joints.
Part # Size
71615 1½" 20 100 15
71620 2" 20 100 19
71630 3" 20 11
71640 4" 10 10
Pkg
Qty
Box
Qty
Box
Wt
FITTING CLEANOUT BODY (SPIGOT X FIP)
Solvent welds into tting hub and adapts to male threaded
plug. PTFE thread tape is recommended for threaded
joints.
Part # Size
71612 1¼" 50 4
71614 1½" 20 100 11
71619 2" 20 100 14
71629 3" 20 9
71639 4" 10 8
71659 6" 10 20
Pkg
Qty
Box
Qty
Box
Wt
ADJUSTABLE P-TRAP W/UNION &
CLEANOUT
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
78215 1½" 20 14
Pkg
Qty
Box
Qty
Box
Wt
ADJUSTABLE P-TRAP W/UNION
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
78315 1½" 20 13
78320 2" 25 20
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV FITTINGS
Genova Products
77
Page 82
P-TRAP W/CLEANOUT
Used to prevent passage of sewer gas from the plumbing
700 SERIES
system into house through the plumbing xture drain.
Part # Size
78415 1½" 20 13
78420 2" 20 21
Pkg
Qty
Box
Qty
P-TRAP
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
78515 1½" 20 11
78520 2" 20 20
78530 3" 10 30
78540 4" 5 27
Pkg
Qty
Box
Qty
U-BEND (HUB X HUB)
Box
Wt
Box
Wt
"POP-TOP" CLOSET FLANGE
"Pop-Top" feature prevents debris from entering plumbing system prior to setting the toilet.
Part # Size
75134 4" x 3" HUB 20 16
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75139 4" x 3" SPIGOT 20 14
Solvent welds into 3" Sch. 40 tting hub.
Part # Size
75140 4" HUB 10 9
Solvent welds over 4" Sch. 40 pipe.
Pkg
Qty
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
CLOSET FLANGE W/METAL RING
This ange has an adjustable metal ring which allows
for easy toilet alignment and a special closet bolt holding design for easy toilet mounting.
Bottom part of trap furnished without cleanout.
Part # Size
78015 1½" 20 9
78020 2" 20 14
78030 3" 15 27
78040 4" 10 34
Pkg
Qty
Box
Qty
Box
Wt
CLOSET FLANGE
Part # Size
75135 4" x 3" HUB 20 15
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75141 4" HUB 10 8
Solvent welds over 4" Sch. 40 pipe.
SCH. 40 PVC-DWV FITTINGS
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Part # Size
75146 4" x 3" SPIGOT 10 9
Solvent welds into 3" Sch. 40 tting hub.
Part # Size
75150 4" x 3" HUB 10 9
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75155 4" HUB 20 16
Solvent welds over 4" Sch. 40 pipe.
Part # Size
75164 4" SPIGOT 10 8
Solvent welds into 4" Sch. 40 tting hub.
Pkg
Pkg
Qty
Pkg
Qty
Pkg
Qty
Qty
Box
Qty
Box
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
Box
Wt
78
Genova Products
Page 83
CLOSET FLANGE W/METAL RING
This ange has an adjustable metal ring which allows for
easier toilet alignment. Provides for a simple method of
installing closet ange on a cement oor.
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75144 4"/4" x 3" SLAB 10 9
Pkg
Qty
Box
Qty
Box
Wt
CLOSET FLANGE W/STAINLESS STEEL RING
UNIVERSAL CLOSET FLANGE WITH STAINLESS
STEEL RING
Economical alternative to current mechanical closet
anges. Installs inside 4" cast iron or PVC-DWV pipe.
Part # Size
75158S 4" HUB 10 9
Pkg
Qty
Box
Qty
Box
Wt
TEST CAP (SPIGOT)
700 SERIES
This ange has an adjustable stainless steel ring which
allows for easy toilet alignment and a special closet bolt holding design for easy toilet mounting.
Solvent welds into 3" Sch. 40 tting hub
Part # Size
75146S 4" x 3" SPIGOT 20 18
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75150S 4" x 3" HUB 20 18
Pkg
Pkg
Qty
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
CLOSET FLANGE SPACER RING
Used to build up existing ange when new ooring or ceramic tile has resulted in ange being at or below oor
level.
Part # Size
75154 4" HUB 25 9
Pkg
Qty
Box
Qty
Box
Wt
OFFSET CLOSET FLANGE W/ METAL RING
Styrene test cap ts into Sch. 40 pipe openings and is
used to prevent debris from entering the plumbing system during construction.
Part # Size
70171 1½" 25 100 1
70172 2" 25 50 1
70173 3" 25 1
70174 4" 20 2
Pkg
Qty
Box
Qty
Box
Wt
PVC ROOF DRAIN ASSEMBLY
(W/GRAVEL GUARD GRATE)
For use on at roof buildings for roof drainage. Also, for use in ground level drainage applications subject to large
amounts of surface debris.
Part # Size
71460 4" SPIGOT 1 5 18
Pkg
Qty
Box
Qty
Box
Wt
SHOWER DRAIN W/STAINLESS STEEL GRATE
(HUB)
SCH. 40 PVC-DWV FITTINGS
This ange has an adjustable metal ring which allows for
easier toilet alignment. Used for mounting toilet base to drain pipe when pipe has been positioned incorrectly in installation.
Solvent welds over 3" Sch. 40 pipe.
Part # Size
75160 4" x 3" HUB 10 10
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
For berglass and acrylic built-in shower applications.
Includes sealing and friction gaskets for a positive seal to the shower base, and a 2" solvent weld discharge.
Part # Size
71480 2" 1 5 14
Pkg
Qty
Box
Qty
Box
Wt
79
Page 84
TOE-SAVER FLOOR PLUG
A must for basement oor installation. Eliminates
tripping hazard posed by conventional raised plugs. Interchangeable with brass or plastic plugs. PTFE thread
700 SERIES
tape is recommended for threaded joints.
Part # Size
71853 3" 20 100 15
71854 4" 10 3
Pkg
Qty
Box
Qty
TWIST-LOK™ PLUG (PATENT NO. 3,677,301)
Box
Wt
NOVAVENT® AUTOMATIC PLUMBING RELIEF
VALVE
Novavent® relief valves are for use on main plumbing vent stacks and eliminates the need for vent roof penetrations.
Relief valves can be used alone or in conjunction with
smaller Novavent® anti-siphon valves.
Part # Size
740401 4" (C) 1 2
Pkg
Qty
Box
Qty
Box
Wt
VERTICAL EXPANSION JOINT
The unique Genova way of providing an easily removable
closure at a Genova tting hub. A patented Genova system
feature.
Part # Size
71871 1½" 20 100 9
71872 2" 20 100 11
71873 3" 20 8
71874 4" 10 7
Pkg
Qty
Box
Qty
Box
Wt
NOVAVENT® AUTOMATIC ANTI-SIPHON
VALVE
Eliminates expensive secondary vent stacks through the roof. Automatically works to prevent loss of trap seal. Made for use with sinks, basins, tubs, showers, vanities and washing machines.
Part # Size
740151 1½" (C) 5 2
74015 1½" 5 2
Pkg
Qty
Box
Qty
Box
Wt
To provide for expansion in straight vertical drain pipe runs exceeding 35 feet in length. 2" and 3" sizes accommodate expansion up to 1¼". 4" size accommodates expansion up to 1¾".
Part # Size
76520 2" 1 15 10
76530 3" 1 10 16
76540 4" 1 10 31
Pkg
Qty
Box
Qty
Box
Wt
SPECIAL WASTE & VENT FITTING
(SINGLE CONFIGURATION)
Provides for the hookup and venting of a complete
bathroom. Each unit furnished with ush branch plug to enable using the tting in a right or left hand drain situation. Branch inlets are 2" socket congurations to
accept 2" pipe. Bushings (Part #70221) are provided to accommodate 1½" pipe.
Part # Size
77530 3" x 1½/2" w/3" Cap 1 5 14
77540 4" x 1½"/2" w/4" Cap 1 5 20
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV SPECIALTY ITEMS
80
(C) = Carded
Genova Products
Page 85
BACKWATER VALVE
700 SERIES
LOS ANGELES PATTERN P-TRAP
Solvent welds directly into PVC-DWV pipe without the need for adapters. Full size cleanout/maintenance port
provided. Helps prevent sewage backup during ood
conditions.
Part # Size
77630 3" 1 4 8
77640 4" 1 2 10
Pkg
Qty
Box
Qty
Box
Wt
SPECIAL WASTE & VENT FITTING
(DOUBLE CONFIGURATION)
Provides for the hookup of all drains from two complete bathrooms located back to back. Each unit furnished with
two ush branch plugs to enable utilizing the tting in a left
or right hand drain situation. Branch inlets are 2" socket
congurations to accept 2" pipe. Bushing (Part #70221)
are provided to accommodate 1½" pipe.
Part # Size
77930 3" x 1½/2" w/3" Cap 1 5 17
77941 4" x 1½"/2" w/4" Cap 1 3 16
Pkg
Qty
Box
Qty
Box
Wt
Used to prevent the passage of sewer gas from the
plumbing system into house through the plumbing xture
drain. Used when local code doesn't permit the use of slip coupled traps.
Part # Size
78715 1¼"/1½" 20 16
Pkg
Qty
Box
Qty
Box
Wt
6" X 6" VINYL BELL TRAP
Designed to solvent weld to Sch. 40 IPS PVC. Installs easily and is direct replacement for cast bell traps. Outlet 1½" socket or 2" spigot.
Part # Size
78860 6" x 6" 5 20 13
Pkg
Qty
Box
Qty
Box
Wt
6" X 6" VINYL BELL TRAP
REPLACEMENT STRAINER
Replacement for Genova's 6" x 6" Bell Trap or corroded strainers on many existing metal bell traps.
SCH. 40 PVC-DWV SPECIALTY ITEMS
SWIVEL DRUM TRAP
PVC version of the old style bathtub "Drum Trap". Largely replaced today by the conventional 1½" P-Trap (See 100 series and 700 series types).
Part # Size
75715 1½" x 3" x 6" 1 15 19
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Pkg
Box
Part # Size
78858 Fits 4½" diameter 1 10 3
Qty
Qty
Box
Wt
9" X 9" VINYL BELL TRAP
Designed to solvent weld to Sch. 40 IPS PVC. Installs easily and is direct replacement for cast iron and die cast bell traps. Outlet 3" Sch. 30 socket or 3" Sch. 40 spigot.
Part # Size
78890 9" x 9" 5 9
Pkg
(C) = Carded
Qty
Box
Qty
Box
Wt
81
Page 86
9" X 9" VINYL BELL TRAP
REPLACEMENT STRAINER
Replacement for Genova's 9" x 9" Bell Trap or corroded
700 SERIES
strainers on many existing metal bell traps.
Pkg
Part # Size
78888 Fits 7¾" diameter 1 10 7
Qty
Box
Qty
PIPE HANGER
Box
Wt
(NOTE: ORDER BY THE BAG) Incorporates a special design which allows for pipe
expansion and contraction. Saddle rotates 360°. (Bulk bag contains 4 pieces.) Nails not included.
VINYL “HUB-FIT” FLOOR STRAINER
Prevents debris from entering a drain opening on the oor. Fits into any tting hub. Fits ush into any tting hub ush to the oor.
Part # Size
79230 3” 20 5
79240 4” 20 10
Pkg
Qty
Box
Qty
Box
Wt
Part # Size
79716 1½" 25 10
79721 2" 25 11
79731 3" 25 14
79741 4" 25 16
Pkg
Qty
Box Qty
(legths)
Box
Wt
PVC PIPE FIT FLOOR STRAINER
Prevents debris from entering a drain opening on the oor. Fits ush into any pipe ush to the oor.
Part # Size
79120 2" 20 2
79130 3" 20 5
79140 4" 20 6
Pkg
Qty
Box
Qty
Box
Wt
SCH. 40 PVC-DWV SPECIALTY ITEMS
82
Genova Products
Page 87
Acrylonitrile Butadiene Styrene (ABS) pipe and ttings are used for drain, waste, and
vent applications.
ABS-DWV Pipe Cellular Core
Meets ASTM F628
NSF Listed
ABS-DWV Fittings
Meets ASTM D2661
NSF Listed
800 SERIES
• Pipe diameters are the same as iron pipe. (IPS = Iron Pipe Size)
Solvent weld joints.
1-800-521-7488 or (810) 744-4500 Fax: (810) 744-3130
www.genovaproducts.com ° inquiry@genovaproducts.com
8 a.m. to 5 p.m. Eastern Standard Time (Monday through Friday)
After business hours please leave a phone message and we will return your call on the next business day.
ABS-DWV PIPE & FITTINGS
Genova Products
83
Page 88
ABS-DWV CELLULAR CORE PIPE
REDUCING COUPLING (HUB X HUB)
Note: Be sure to order by the length not by the foot.
800 SERIES
Part # Size
Bdl Qty
(lgths)
80011F 1½” x 10’ 5 180 14
80012F 1½” x 20’ 5 90 27
80021F 2" x 10' 5 140 19
80022F 2" x 20' 5 70 37
80031F 3" x 10' 5 75 35
80032F 3" x 20' 5 50 69
80041F 4" x 10' 3 54 30
80042F 4" x 20' 3 36 60
Skid
Qty
(lgths)
COUPLING (HUB X HUB)
Used to join straight lengths of pipe.
Part # Size
80115 1½” 20 100 8
80120 2" 20 100 12
80130 3" 20 8
80140 4" 10 7
Pkg
Qty
Box
Qty
Bdl
Wt
(lbs)
Box
Wt
Used to reduce or increase pipe sizes.
Part # Size
80121 2" x 1½” 20 100 12
80131 3” x 1½" 20 7
80132 3" x 2" 20 6
80142 4" x 2" 20 12
80143 4" x 3" 20 14
Pkg
Qty
Box
Qty
Box
Wt
CAP (HUB)
Used for permanently or temporarily capping pipe.
Part # Size
80151 1½” 20 100 7
80152 2" 20 100 9
80153 3" 20 6
80154 4" 10 6
Pkg
Qty
Box
Qty
Box
Wt
CAP (FIP)
Used for permanently or temporarily capping pipe. Adapts to male pipe threads. PTFE thread tape is recommended
for threaded joints.
REPAIR COUPLING (NO STOP) (HUB X HUB)
Furnished without center stop so that stationary lengths of pipe can be spliced together.
Part # Size
80116 1½” 20 2
80122 2” 20 3
80133 3" 20 7
80144 4" 10 5
ABS-DWV PIPE & FITTINGS
84
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Part # Size
80161 1½” 100 6
Pkg
Qty
Box
Qty
Box
ADAPTER BUSHING (DWV SPIGOT X S&D HUB)
Adapts ABS tting hub to sewer pipe.
Part # Size
85330 3" 50 6
85340 4" 25 4
Pkg
Qty
Box
Qty
Box
Wt
Wt
Page 89
REDUCING BUSHING (SPIGOT X HUB)
Inserts into tting hub to reduce to smaller pipe size.
Part # Size
80211 1½" x 1¼ 50 2
80221 2" x 1½" 20 100 8
80231 3” x 1½" 20 7
80232 3" x 2" 20 7
80242 4" x 2" 10 6
80243 4" x 3" 10 5
Pkg
Qty
Box
Qty
Box
Wt
REDUCING BUSHING (SPIGOT X FIP)
Inserts into tting hub to reduce to standard male pipe
threads. PTFE thread tape is recommended for threaded
joints.
Part # Size
84221 2" x 1½" 65 6
Pkg
Qty
Box
Qty
Box
Wt
FLUSH BUSHING (SPIGOT X FIP)
MALE ADAPTER (HUB X MIP)
Adapts to standard female pipe threads. PTFE thread tape
is recommended for threaded joints.
Part # Size
80411 1½" x 1¼" 20 100 7 80415 1½" 20 100 7 80420 2" 20 100 9 80430 3" 20 6 80440 4" 10 6
Pkg
Qty
Box
Qty
Box
Wt
SEWER PIPE ADAPTER COUPLING
(SEWER HUB X SCH. 40 HUB)
Adapts Sch. 40 IPS pipe to 4" sewer pipe.
Part # Size
81543 4" x 3" 20 10
81544 4" x 4" 10 5
Pkg
Qty
Box
Qty
Box
Wt
TRAP ADAPTER (HUB X SLIP JAMNUT)
800 SERIES
Inserts into tting hub to reduce to smaller male threaded
pipe size.
Part # Size
84232 3" x 2" 20 6
Pkg
Qty
Box
Qty
Box
Wt
FEMALE ADAPTER (HUB X FIP)
Adapts to standard male pipe threads. PTFE thread tape
is recommended for threaded joints.
Part # Size
80315 1½" 20 100 9
80320 2" 20 100 12
80330 3" 20 8
80340 4" 10 6
Pkg
Qty
Box
Qty
Box
Wt
Utilized to adapt ABS pipe to tubular traps at wall or oor. This tting solvent welds over 1½" DWV pipe. Sometimes
called a Marvel.
Part # Size
82211 1½" x 1¼" 20 100 12
82215 1½" 20 100 11
Pkg
Qty
Box
Qty
Box
Wt
FITTING TRAP ADAPTER
(SPIGOT X SLIP JAMNUT)
Utilized to adapt ABS tting hub to tubular traps at wall or oor. This tting solvent welds into a DWV fitting hub.
Sometimes called a Marvel.
Part # Size
82311 1½" x 1¼" 20 100 11
82314 1¼" 50 5
82315 1½" 20 100 11
Pkg
Qty
Box
Qty
Box
Wt
ABS-DWV FITTINGS
Genova Products
85
Page 90
FITTING ADAPTER (SPIGOT X MIP)
Adapts tting hub to standard female pipe threads. PTFE thread tape is recommended for threaded joints.
800 SERIES
Part # Size
82415 1½" 20 100 8
82420 2" 25 2
Pkg
Qty
Box
Qty
SWIVEL TRAY PLUG ADAPTER (HUB X FIP)
Used to connect laundry tray to drain.
Box
Wt
22½° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Sixteenth Bend".
Part # Size
80815 1½" 20 100 11
80820 2" 20 4
80830 3" 20 12
80840 4" 10 10
Pkg
Qty
Box
Qty
Box
Wt
22½° STREET ELBOW (HUB X SPIGOT)
Part # Size
88915 1½" 80 7
Pkg
Qty
Box
Qty
TRAY PLUG ADAPTER
(SPIGOT X FEMALE NPSM)
Used to connect laundry tray to drain.
Part # Size
89815 1½" 5 1
Pkg
Qty
Box
Qty
SWIVEL TRAY PLUG (SPIGOT X FIP)
Box
Wt
Box
Wt
Used to change direction in piping. Sometimes called a "Sixteenth Bend".
Part # Size
85815 1½" 20 100 11
85820 2" 20 4
85830 3" 20 11
Pkg
Qty
Box
Qty
Box
Wt
45° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called an “Eighth Bend”.
Used to connect laundry tray to drain.
Part # Size
89915 1½" 5 10 1
ABS-DWV FITTINGS
86
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Part # Size
83615 1½” 20 100 15
83620 2" 20 100 24
80630 3" 20 14
80640 4" 10 13
Pkg
Qty
Box
Qty
Box
Wt
Page 91
45° STREET ELBOW (HUB X SPIGOT)
Used to change direction from a tting hub to pipe.
Sometimes called a “Street Eighth Bend”.
90° VENT ELBOW (HUB X HUB)
800 SERIES
Used to change direction in the "dry" portion of vent
piping where water ow is not a consideration. Sometimes
called a "Short Turn Quarter Bend".
Part # Size
82715 1½" 20 100 15
82720 2" 20 100 24
82730 3" 20 14
82740 4" 10 13
Pkg
Qty
Box
Qty
Box
Wt
60° ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a “Sixth Bend”.
Part # Size
80915 1½” 20 100 14
80920 2" 20 5
80930 3" 20 13
80940 4" 10 12
Pkg
Qty
Box
Qty
Box
Wt
Part # Size
80715 1½" 20 100 16
80720 2" 20 4
80730 3" 20 14
Pkg
Qty
Box
Qty
Box
Wt
90° SANITARY STREET ELBOW
(HUB X SPIGOT)
Used to change direction from a tting hub to a pipe.
Sometimes called a "Street Quarter Bend".
Part # Size
82916 1½" 20 100 18
82926 2" 20 6
82936 3" 20 17
82946 4" 10 15
Pkg
Qty
Box
Qty
Box
Wt
90° SANITARY ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a “Quarter Bend”.
Part # Size
82815 1½" 20 100 18
82820 2' 20 100 29
82830 3" 20 19
82840 4" 10 15
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
REDUCING CLOSET BEND (HUB X HUB)
Used to change direction in piping as well as size. Usually utilized to convert from 3" horizontal pipe to 4" vertical pipe directly under the toilet.
Part # Size
82834 4" x 3" 20 23
Pkg
Qty
Box
Qty
Box
Wt
ABS-DWV FITTINGS
87
Page 92
REDUCING CLOSET BEND (SPIGOT X HUB)
Used to change direction in piping as well as size. Usually
utilized to convert from 3" horizontal pipe to 4" tting hub
800 SERIES
directly under the toilet.
90° ELBOW W/LOWHEEL INLET
(HUB X HUB X HUB)
Connects a branch line or vent at a change of direction in a larger vertical or horizontal pipe.
Part # Size
82934 4" x 3" 10 11
Pkg
Qty
Box
Qty
Box
Wt
REDUCING CLOSET BEND W/TEST CAP
(SPIGOT X HUB)
Used to change direction in piping as well as size. Usually
utilized to convert from 3" horizontal pipe to 4" tting hub
directly under the toilet.
Part # Size
82935 4" x 3" 10 11
Pkg
Qty
Box
Qty
Box
Wt
Part # Size
83032 3" x 3" x 2" 20 19
83042 4" x 4" x 2" 10 15
Pkg
Qty
Box
Qty
Box
Wt
90° ELBOW W/SIDE INLET
(HUB X HUB X HUB)
Connects a branch line or vent at a change of direction in a larger vertical or horizontal drain pipe.
Part # Size
83132 3" x 3" x 2" 20 18
Pkg
Qty
Box
Qty
Box
Wt
90° LONG SWEEP ELBOW (HUB X HUB)
Used to change direction in piping. Sometimes called a "Long Turn Quarter Bend".
Part # Size
83815 1½" 20 100 24
83820 2" 20 80 26
83830 3" 20 21
83840 4" 10 18
ABS-DWV FITTINGS
88
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
WYE (HUB X HUB X HUB)
Used when connecting a branch line into a horizontal drain pipe.
Part # Size
81015 1½" 25 8
81020 2" 20 10
81030 3" 20 27
81040 4" 5 14
Pkg
Qty
Box
Qty
Box
Wt
Page 93
REDUCING WYE (HUB X HUB X HUB)
REDUCING COMBINATION TEE-WYE
800 SERIES
(HUB X HUB X HUB)
Used when connecting a branch line into a horizontal drain pipe. Reduces to smaller pipe size.
Part # Size
81021 2" x 2" x 1½" 20 9
81023 2" x 1½" x 1½" 20 8
81031 3" x 3" x 1½" 20 18
81032 3" x 3" x 2" 20 19
81042 4" x 4" x 2" 10 15
81043 4" x 4" x 3" 10 21
Pkg
Qty
Box
Qty
Box
Wt
DOUBLE WYE (ALL HUB)
Used to bring two branch lines into a horizontal drain pipe.
Part # Size
83415 1½" 25 11
83420 2" 20 13
83430 3" 10 19
83440 4" 5 17
Pkg
Qty
Box
Qty
Box
Wt
COMBINATION TEE-WYE (HUB X HUB X HUB)
Used in some plumbing code areas to connect a reducing branch line into a vertical drain pipe instead of a
conventional tee tting. Also, is the acceptable method
of connecting a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a "Street Eighth Bend").
Part # Size
82521 2" x 2" x 1½" 10 4
82531 3" x 3" x 1½" 10 11
82532 3" x 3" x 2" 10 11
82542 4" x 4" x 2" 10 14
82543 4" x 4" x 3" 5 13
Pkg
Qty
Box
Qty
Box
Wt
SANITARY TEE (HUB X HUB X HUB)
Used when connecting a branch line into a vertical drain pipe.
Part # Size
81115 1½" 20 5
81120 2" 20 8
81130 3" 20 25
81140 4" 10 21
Pkg
Qty
Box
Qty
Box
Wt
REDUCING SANITARY TEE
(HUB X HUB X HUB)
Used in some plumbing code areas to connect a branch line into a vertical drain pipe instead of a conventional
tee tting. Also, is the acceptable method of connecting
a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Can be made from a wye and a "Street Eighth Bend".
Part # Size
82515 1½" 20 8
82520 2" 10 7
82530 3" 10 19
82540 4" 5 19
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
Used when connecting a reducing branch line into a vertical drain pipe.
Part # Size
81123 2" x 1½" x 1½" 50 15
81122 2" x 1½" x 2" 20 8
81121 2" x 2" x 1½" 20 7
81131 3" x 3" x 1½" 20 14
81132 3" x 3" x 2" 20 16
81142 4" x 4" x 2" 10 12
81143 4" x 4" x 3" 10 17
Pkg
Qty
Box
Qty
Box
Wt
ABS-DWV FITTINGS
89
Page 94
SANITARY TEE (SPIGOT X HUB X HUB)
Used when connecting a branch line into a vertical drain
800 SERIES
pipe.
Part # Size
86115 1½" 50 11
86120 2" 20 6
86130 3" 10 10
Pkg
Qty
Box
Qty
DOUBLE FIXTURE TEE (ALL HUB)
Used in some plumbing code areas to connect two branch lines into a vertical drain pipe.
Box
Wt
REDUCING DOUBLE SANITARY TEE
(ALL HUB)
Used to bring two branch lines into a vertical drain pipe.
Part # Size
83521 2" x 2" x 1½" x 1½" 15 7
83531 3" x 3" x 1½" x 1½" 10 8
83532 3" x 3" x 2" x 2" 10 10
Pkg
Qty
Box
Qty
Box
Wt
TEST TEE W/CLEANOUT PLUG
(HUB X HUB X FIP)
Part # Size
82620 2" 20 12
Pkg
Qty
Box
Qty
REDUCING DOUBLE FIXTURE TEE (ALL HUB)
Used in some plumbing code areas to connect a reducing branch line into a vertical drain pipe.
Part # Size
82621 2" x 1½" x 1½" x 1½" 25 10
Box
Qty
DOUBLE SANITARY TEE (ALL HUB)
Used to bring two branch lines into a vertical drain pipe.
Part # Size
83515 1½" 20 6
83520 2" 15 8
83530 3" 10 15
83540 4" 5 14
Pkg
Qty
Box
Qty
ABS-DWV FITTINGS
Box
Wt
Box
Wt
Box
Wt
Used at the base of a vertical drain pipe to provide a
cleanout opening ush with the nished wall. PTFE thread tape is recommended for threaded joints.
Part # Size
81315 1½" 10 3
81320 2" 10 4
81340 4" 10 19
Pkg
Qty
Box
Qty
Box
Wt
TEST TEE (HUB X HUB X FIP)
Used in conjunction with a threaded plug to provide a
cleanout opening. PTFE thread tape is recommended for
threaded joints.
Part # Size
81416 1½" 10 3
81421 2" 10 4
81431 3" 10 8
81441 4" 10 16
Pkg
Qty
Box
Qty
Box
Wt
90
Genova Products
Page 95
TWO-WAY CLEANOUT TEE
(HUB X HUB X HUB)
FITTING CLEANOUT W/THREADED PLUG
800 SERIES
(SPIGOT X FIP)
Used with vertical drain pipe stack, this tting provides for
above ground level access to piping.
Part # Size
81633 3" 10 16
81644 4" 5 15
Pkg
Qty
Box
Qty
Box
Wt
VENT TEE (HUB X HUB X HUB)
Used primarily in vent lines. Used where ow characteristics
are not a primary consideration.
Part # Size
81415 1½" 10 3
81420 2" 10 3
81430 3" 10 10
81440 4" 10 20
Pkg
Qty
Box
Qty
Box
Wt
Solvent welds into tting hub to provide access to piping. PTFE thread tape is recommended for threaded joints.
Part # Size
81615 1½" 20 100 14
81620 2" 20 100 17
81630 3" 25 13
81640 4" 10 9
Pkg
Qty
Box
Qty
Box
Wt
SNAP-IN CLEANOUT W/PLUG
Fitting ts into Sch. 40 DWV pipe and is used to provide
access to piping.
Part # Size
89340 4" 10 4
Pkg
Qty
Box
Qty
Box
Wt
FITTING CLEANOUT BODY (SPIGOT X FIP)
Conventional threaded cleanout tting solvent welds into tting hub and adapts to male threaded plug. PTFE thread tape is recommended for threaded joints.
Part # Size
81614 1½" 20 100 10
81619 2" 20 100 11
81629 3" 20 7
81639 4" 10 6
Pkg
Qty
Box
Qty
Box
Wt
Genova Products
THREADED PLUG (MIP)
Used to form a removable closure. These threaded plugs
oer a corrosion proof alternative to metal plugs. PTFE thread tape is recommended for threaded joints.
Part # Size
81814 1¼" 20 100 3
81815 1½" 20 100 5
81820 2" 20 100 7
81830 3" 20 100 17
81835 3½" 20 5
81840 4" 10 3
Pkg
Qty
Box
Qty
Box
Wt
ABS-DWV FITTINGS
91
Page 96
COUNTER SUNK PLUG (MIP) P-TRAP
Used to form a removable ush closure. PTFE thread tape is recommended for threaded joints.
800 SERIES
Part # Size
81851 1½" 50 2
81852 2" 50 3
81853 3" 75 9
81854 4" 25 6
Pkg
Qty
Box
Qty
SLIP JOINT NUT (FIP)
Interchanges with metal or plastic and oers a corrosion
proof alternative to metal nuts.
Part # Size
84715 1½" 25 50 2
Pkg
Qty
Box
Qty
ADJUSTABLE P-TRAP W/UNION
Box
Wt
Box
Wt
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
88515 1½" 20 8
88520 2" 20 15
88530 3" 10 21
88540 4" 5 20
Pkg
Qty
Box
Qty
Box
Wt
LOS ANGELES P-TRAP
Used to prevent the passage of sewer gas from the
plumbing system into house through the plumbing xture
drain. Used when local code doesn't permit the use of slip coupled traps.
Part # Size
88715 1¼"/1½" 20 11
Pkg
Qty
Box
Qty
Box
Wt
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
88314 1¼" 10 50 19
88315 1½" 20 9
88320 2" 20 16
Pkg
Qty
Box
Qty
P-TRAP W/CLEANOUT
Used to prevent passage of sewer gas from the plumbing
system into house through the plumbing xture drain.
Part # Size
88415 1½" 50 22
88420 2" 10 8
Pkg
Qty
Box
Qty
ABS-DWV FITTINGS
Box
Wt
Box
Wt
U-BEND W/CLEANOUT (HUB X HUB)
Bottom part of trap furnished with cleanout
Part # Size
88115 1½" 50 15
Pkg
Qty
Box
Qty
CLOSET FLANGE
Part # Size
85135 4" x 3" HUB 20 13
Solvent welds over 3" Sch. 40 pipe.
Part # Size
85141 4" HUB 10 6
Solvent welds over 4" Sch. 40 pipe.
Pkg
Qty
Pkg
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
92
Genova Products
Page 97
CLOSET FLANGE W/GUSSETS
CLOSET FLANGE W/METAL RING
800 SERIES
Solvent welds over 4" Sch. 40 pipe.
Part # Size
85133 4" HUB 35 19
Pkg
Qty
Box
Qty
Box
Wt
"POP-TOP" CLOSET FLANGE
Solvent welds over 3" Sch. 40 pipe. Unique "Pop-Top" feature prevents debris from entering plumbing system prior to setting the toilet.
Part # Size
85134 4" x 3" HUB 20 14
Pkg.
Qty.
Box
Qty
Box
Wt
CLOSET FLANGE
These anges have an adjustable metal ring which allows
for easy toilet alignment.
Part # Size
85146 4" x 3" SPIGOT 10 8
Solvent welds into 3" Sch. 40 tting hub.
Part # Size
85150 4" x 3" HUB 10 8
Solvent welds over 3" Sch. 40 pipe.
Part # Size
85155 4" HUB 25 19
Solvent welds into 4" Sch. 40 pipe.
Part # Size
85164 4" SPIGOT 25 24
Solvent welds into 4" Sch. 40 tting hub.
Pkg
Pkg
Qty
Pkg
Qty
Pkg
Qty
Qty
Box
Qty
Box
Qty
Box
Qty
Box
Qty
Box
Wt
Box
Wt
Box
Wt
Box
Wt
Adapts to standard male pipe threads.
Part # Size
85136 4" x 3" FIP 20 11
Pkg
Qty
Box
Qty
Box
Wt
CLOSET FLANGE-FLUSH FIT
Solvent welds over 3" Sch. 40 pipe.
Part # Size
85166 4" x 3" HUB 10 6
Pkg
Qty
Box
Qty
Box
Wt
OFFSET CLOSET FLANGE W/ METAL RING
This ange has an adjustable metal ring which allows for
easier toilet alignment. Solvent welds over 3" Sch. 40 pipe.
Part # Size
85160 4" x 3" HUB 10 11
Pkg
Qty
Box
Qty
Box
Wt
UNIVERSAL CLOSET FLANGE
WITH STAINLESS STEEL RING
Economical alternative to current mechanical closet
anges. Installs inside 4" cast iron or ABS-DWV pipe.
Part # Size
85158S 4" HUB 10 8
Pkg
Qty
Box
Qty
Box
Wt
BACKWATER VALVE
Solvent welds directly into ABS-DWV pipe without the need for adapters. Full size cleanout/maintenance port
provided. Helps prevent sewage backup during ood
conditions.
Part # Size
87630 3" 1 4 8
87640 4" 1 2 9
Pkg
Qty
Box
Qty
Box
Wt
ABS-DWV FITTINGS
Genova Products
93
Page 98
NON-NSF POLYETHYLENE PIPE
900 SERIES
Part # Size
Pressure
Rating
at 73°F (PSI)
Coil
Qty
Coil
Wt
(lbs)
911051 ½” x 100’ 100 1 5
911052 ½” x 400’ 100 1 20
911071 ¾” x 100’ 100 1 7
911072 ¾” x 400’ 100 1 26
911101 1” x 100' 100 1 9
911102 1” x 300’ 100 1 27
911111 1¼” x 100’ 100 1 15
911112 1¼” x 300’ 100 1 44
911121 1½” x 100’ 100 1 20
911122 1½” x 300’ 100 1 59
911221 2” x 100’ 100 1 33
911222 2” x 200’ 100 1 65
NSF APPROVED POLYETHYLENE PIPE (ASTM D-2239, PE 3408)
Part # Size
910053 ½” x 25' 125 1 2
910054 ½” x 50’ 125 1 3
912051 ½" x 100' 125 1 6
912052 ½" x 400' 125 1 23
910073 ¾" x 25' 100 1 2
910074 ¾" x 50' 100 1 4
910071 ¾" x 100' 100 1 8
910072 ¾" x 400' 100 1 30
910103
910104 1" x 50' 100 1 6
910101 1" x 100' 100 1 11
910102 1" x 300' 100 1 33
910113 1¼" x 25' 100 1 5
910114 1¼" x 50' 100 1 9
910111 1¼" x 100' 100 1 19
POLYETHYLENE PIPE
94
1" x 25'
Pressure
Rating
at 73°F (PSI)
100 1 3
(Continued.....)
Genova Products
Coil Qty
Coil
Wt
(lbs)
Page 99
(NSF Approved Polyethylene Pipe Continued.....)
900 SERIES
Pressure
Part # Size
Rating
at 73°F (PSI)
910112 1¼" x 300' 100 1 56
910121 1½" x 100' 100 1 25
910122 1½" x 300' 100 1 77
910221 2" x 100' 100 1 42
910222 2" x 200' 100 1 84
912071 ¾" x 100' 125 1 9
912101 1" x 100' 125 1 15
912102 1" x 300' 125 1 43
912112 1¼" x 300' 125 1 75
912121 1½" x 100' 125 1 32
916051 ½" x 100' 160 1 6
916071 ¾" x 100' 160 1 12
916072 ¾" x 300' 160 1 35
916101 1" x 100' 160 1 19
916102 1" x 300' 160 1 57
916111 1¼" x 100' 160 1 33
916112 1¼" x 300' 160 1 97
916221 2" x 100' 160 1 69
920071 ¾" x 100' 200 1 16
920101 1" x 100' 200 1 25
920111 1¼" x 100' 200 1 42
Coil
Qty
Coil
Wt
(lbs)
Genova Products
POLYETHYLENE PIPE
95
Page 100
CHECK VALVE (MIP X POLY INSERT)
Used to prevent discharge line backow into sump pit.
900 SERIES
Prevents sump pump "short cycling". Made to adapt directly to 1½" solvent weld fittings or 1¼" flexible polyethylene.
Part # Size
96610 1¼" x 1¼" 5 20 6
Pkg
Qty
Box
Qty
Box
Wt
UNIVERSAL CHECK VALVE
Each individually merchandised packaged valve provides easy installation instructions. The valves are truly universal; provided with two adapter hoses and necessary stainless
clamps, they will t the full range of pipe sizes from 1¼"
polyethylene to 1½" iron or plastic.
Part # Size
966311 10 9
Check valves are available from the factory in box
quantities only.
Pkg
Qty
Box
Qty
Box
Wt
SUMP PUMP CHECK VALVES
96
Genova Products
Loading...