GENNUM H-100 User Manual

Download

Page 1

DIGITAL WIRELESS HEADSET

USER'S MANUAL

with

HearPhone Technology

™

Page 2

Contents

Introduction ........................................................................................6

Contents of this Package ........................................................6

Safety Information ....................................................................8

Getting Started...................................................................................9

Connecting the Ear Tip............................................................9

Connecting a custom earmold ..............................................9

Positioning the Headset........................................................10

Positioning Hints.....................................................................12

Turning the headset on or off..............................................12

Volume Control......................................................................13

Storage Position......................................................................13

Operating Modes: Universal, Directional, Bluetooth ...............14

Universal Mode.......................................................................15

Directional Mode ...................................................................16

Bluetooth Mode......................................................................17

Page 3

Setting up to receive phone calls........................................18

After you've ended a call ......................................................18

Sound Customization features .....................................................19

Connecting to Cell Phones - Pairing to your cell phone .......20

How to Pair your Headset to your Cell Phone ..............20

Features for phones supporting the BLUETOOTH

Headset Profile only ..............................................................22

To answer a call .............................................................22

To end a call....................................................................22

To make a call.................................................................22

To transfer a call ............................................................22

To Mute/ “Unmute” ......................................................23

Features for phones supporting the BLUETOOTH

Handsfree Profile....................................................................23

Answering a call.............................................................24

To create a link ..............................................................24

Page 4

To end a call....................................................................24

To make a call.................................................................25

Voice Dial ........................................................................25

Last Number Redial......................................................26

Last Number Redial while on a Call .........................26

To reject a call................................................................26

To transfer a call from the headset to the phone..26

To transfer a call from the phone to the headset..26

Call Waiting.....................................................................27

Mute / Unmute ..............................................................28

Care and Maintenance of your headset .....................................29

Eartips .......................................................................................29

Cleaning the eartips......................................................29

Cleaning your custom earmold..................................30

Headset Maintenance ............................................................30

Battery and Charging Information...............................................31

Page 5

Minimizing Power Consumption.........................................31

Battery Life ..............................................................................31

Low Battery Indicator (Red Light) .....................................31

How to charge the headset .................................................32

Replacing the battery.............................................................32

Frequently Asked Questions (FAQs) ..........................................33

Limited Warranty.............................................................................36

Trademarks™ and Registered Trademarks ®..................38

FCC Notice ......................................................................................39

EU Notice .........................................................................................40

Contact Information .......................................................................42

HANDSFREE FUNCTION QUICK SUMMARY......................44

Page 6

Introduction

The Digital Wireless Headset with HearPhone™ Technology and Bluetooth connectivity provides a high quality digital wireless connection between Bluetooth-enabled devices and the digital headset.The DigitalWireless Headset with HearPhone™ Technology incorporates wide dynamic range compression, FRONTWAVE directional microphones, noise reduction, and active feedback cancellation. This headset can be custom programmed to satisfy the user's hearing needs and listening preferences.

Any device that supports the headset or HandsFree Bluetooth profile may be paired to this headset.

Digital Wireless Headset with HearPhone™ Technology

Replacement Ear Tips Handsfree Function Quick Summary sheet piece of (size 12 standard) tubing for use with custom earmolds (9”

length).

User's Manual

Contents of this Package

•1

•3

•1

•1Wall Charger with 4 Adapters (North America, UK, Europe,Australia)

Page 7

Page 8

Safety Information

! This package contains small parts which may be hazardous to children under

3. Headsets encourage hands-free operation of phones while driving or

conducting other activities. Please obey the laws regarding cell-phone use while driving,and give your full attention to the operation of your vehicle.

Do not attempt to use this device if it is submerged in liquid. Immediately unplug all electrical connections.Users with pacemakers or other electrical medical devices should consult with their physicians before using cellular phones or a headset.

The use of wireless devices and their accessories may be prohibited or restricted in certain areas.Always obey the local laws and regulations on the use of these products.

Although this headset is warranted,reflecting its design quality and reliability, fail-safe reliability is not implied.This headset-hearing instrument should not be relied on as a primary safety system in any application where injury or loss of life may result from failure of the hearing device to operate properly. No redundancy or back-up is available in either the power source or the individual and collective circuit functions of the product.

Page 9

Getting Started

Connecting the EarTip

With one hand, firmly grasp the end of the ear tip.With the other hand, grasp the end of the flexible arm.Remove the ear tip with a gentle tug.To replace the ear tip,reverse this procedure by aligning the hole in the ear tip and pushing it on the end of the flexible arm until it is firmly seated in position.

Connecting a custom earmold

For improved comfort and sound quality, you may wish to obtain a custom earmold to attach to your headset. Custom earmolds are made by hearing healthcare providers (typically, audiologists and hearing instrument dispensers).A silicone impression of your ear is made and then shipped to

Page 10

an earmold lab for final construction. In order for the custom earmold to fit onto your headset, you will need to provide the clear plastic tubing (included in your headset kit) to the hearing healthcare provider at the time the earmold impression is made.The tubing will be incorporated into your custom earmold and will be compatible with your headset.

Positioning the Headset

The headset's flexible arm (see photos above) can be rotated to fit either ear.To position the headset, grasp it between your thumb and index and middle fingers as shown. Position the body of the headset over the top of

Page 11

the ear and the ear tip into the ear. Rotate the headset until it hooks into position over the top of your ear.Adjust the flexible arm until the ear tip is comfortably positioned in your ear.This is just one suggestion for putting it on and you may find a more convenient way of doing it.We encourage you to try this a few times until you find the most comfortable position for yourself.

To avoid damaging your headset, only manipulate the flexible arm of

the headset.

Note:

Page 12

Positioning Hints

For best results, ensure that the ear tip is inserted snugly into the ear.A snug fit will provide the best possible sound quality as well as good isolation from environmental noise allowing you to hear incoming calls more clearly.

To obtain a snug fit, apply light pressure to the end of the flexible arm until the ear tip feels snug but comfortable in the ear canal.

To avoid damaging your headset, only manipulate the area of the headset arm as shown here.

Note:

flexible

Turning the headset on or off

To turn on the headset:

Press and hold the MODE button and you will see 2 flashes of the Blue Indicator Light, followed by a longer 3 second flash.Release the button at any time. If you are wearing the headset, you will hear a quick series of tones going from low to high pitch.The blue indicator light will turn off to indicate you have successfully powered on the headset.

To turn off the headset:

Press and hold the MODE button until you hear 4 beeps. Release the MODE button and you will hear a quick series of tones going

FLEXIBLE AREA

Page 13

Volume Control

Storage Position

With the headset oriented upright, push upward or downward on the volume dial to decrease or increase the volume, respectively.

Do not initially turn the volume control to maximum until you become familiar with the volume levels and determine what is most comfortable for you.

1. Rotate the flexible arm upwards into the upright position as shown in the photograph for storage.

2. Turn it off by pushing the volume dial upwards until you feel the détente (click).

3. Place your headset in a clean, dry place away from extreme heat or cold.

Note:

Page 14

Operating Modes: Universal, Directional, Bluetooth

Introduction

As soon as you turn on your headset, it functions in Universal Mode.This mode allows you to hear locally-generated sound that has been customized to suit your hearing preferences before it is sent through the headset and into your ear canal.This mode keeps you in touch with what's happening around you, allowing you to hear sound from all around you - in front, to the side, and behind you. However, if you find yourself in a challenging listening environment in which you prefer to focus on sound coming from directly in front of you - to hear a friend sitting across from you in a restaurant, for example - then you can switch the headset to Directional Mode.The third operating mode is Bluetooth Mode. In this mode, you are engaged in a phone call and have one or more phone calls actively in progress.

Page 15

Universal Mode

As soon as you turn on your headset, it is in Universal Mode. Use this Mode in quiet listening environments and/or whenever you want to hear sound coming from all directions.Your customized hearing preferences are in effect, modifying the tones and loudness of the incoming sounds to suit your listening preferences. Sound that is generated in your immediate vicinity will arrive at your ear customized to suit your hearing preferences. Please read Sound Customization features below for more information about customizing sound to suit your hearing preferences.Your hearing healthcare provider can customize your headset to suit your preferences.

In addition to the sound customization that can be programmed into your headset, you can always adjust the volume control on the top back of the headset to increase or decrease the volume as you wish.

In both Universal and Directional modes you will hear a ringing sound if a cell phone call arrives, and will hear the beeping tones that assist you in managing cellular phone calls. Please read Features for phones supporting the BLUETOOTH and Features for phones supporting the BLUETOOTH Handsfree Profile in this manual regarding how to handle

Page 16

calls, use voice dial, manage multiple calls (call waiting), etc.

Remember:

If you decide to initiate or accept a cellular phone call, or connect wirelessly to your computer, then you will only hear the phone or computer audio. Once you break the connection to those devices, you will once again hear the sounds being generated in your immediate vicinity.

To switch to Directional Mode from Universal Mode:

Press the Mode Button.When you press the Mode Button, you will hear 2 beeps, which indicates that you are in Directional Mode.

To switch to Universal Mode from Directional Mode:

Press the Mode Button.When you press the Mode Button, you will hear 1 beep, which indicates that you are in Universal Mode.

Use Directional Mode whenever you want to focus your attention to sound coming from in front of you. In this mode, you will not hear sounds coming from behind you very well.This mode is the mode to use when

Directional Mode

Page 17

you want to hear one source of sound, such as your dining partner's voice from across the table, and don't want to be disturbed by sound occurring behind you. It is a good idea to use Directional Mode whenever you find yourself in especially challenging (noisy) listening environments.

To switch to Universal Mode from Directional Mode:

Press the Mode Button.When you press the Mode Button, you will hear 1 beep, which indicates that you are in Universal Mode.

Remember: If you decide to initiate or accept a cellular phone call, or connect wirelessly to your computer, then you will only hear the phone or computer audio. Once you break the connection to those devices, you will once again hear the sounds being generated in your immediate vicinity.

Your headset can be paired with any Bluetooth-enabled audio device. When a phone call arrives from a Bluetooth enable phone, you may hear a ringing sound (depending on phone model).You may accept or reject the call. Please read Features for phones supporting the BLUETOOTH and

Bluetooth Mode

Page 18

Features for phones supporting the BLUETOOTH Handsfree Profile in this manual regarding how to handle calls, use voice dial, manage multiple calls (call waiting), etc. Please read the manual that came with your cellular phone for instructions regarding headset operation.

In order to receive cell phone calls through your Digital Wireless Headset:

1. Your headset and cell phone must have been paired (see How to Pair your Headset to your Cell Phone, below).

2. They must both be turned on, and

3. They must be within 10m of each other.

When a phone call arrives, you may hear a ringing sound depending on your phone model.

Noise reduction technology is in effect at all times to improve the

quality of both the incoming transmission and the outgoing transmission.

Your headset will return you automatically to whichever mode you were in

Setting up to receive phone calls

After you've ended a call

Note:

Page 19

just prior to the arrival of the last phone call.Therefore, if you were in Universal mode, you will be returned to that mode after ending your phone call. If you were in Directional mode, you will be returned to Directional mode after ending your phone call.

Sound Customization features

The Digital Wireless Headset with HearPhone™ Technology can be programmed using HearPhone™ software, the Hi-Pro programming box, and the CS44 cable.Your headset can be programmed to provide you with the balance of bass, mid-frequency, and treble tones that you find most pleasant to listen to.The loudness of these tones is also programmable, and you can also limit the maximum sound that the headset delivers to your ear.This ensures that you won't hear sounds that are intolerably loud. Ask your hearing healthcare provider to program your headset to suit your particular hearing needs and preferences.

Page 20

Connecting to Cell Phones - Pairing to your cell phone

It is necessary to “pair” the headset with your Bluetooth-enabled cell phone in order for them to communicate wirelessly. Once pairing is complete, as long as the devices are within range (10 meters/33 feet) of each other and both devices are switched on, the two devices will be able to communicate with each other. Pairing is done once and normally there is no need to repeat this.

1. Turn on the Bluetooth function on your phone (refer to your phone's user manual)

2. Turn the headset on

3. Press and hold the PINCH button until you hear 4 beeps (or 4 flashes if you are not wearing the headset), then release the button

4. Verify that the blue indicator light is solid on, indicating the headset is now in phone pairing mode.

How to Pair your Headset to your Cell Phone

Page 21

5. Follow your phone's pairing procedure to pair it with the headset

6. When found, the headset will display as “HearPhone” on your phone.

7. When asked for the passkey, password or pin code, enter on the phone's keypad: 0000

8. If pairing is successful, your phone will display a “pairing successful” message and the blue indicator light will turn off. If you are wearing the headset, you will hear a 'pairing success' melody

9. Depending on your phone model, you may have to initiate a Bluetooth Connection.This can be achieved by selecting 'connect to Bluetooth device' from your phone or by pressing and holding the PINCH button for 1 beep, then release the button.

Repeat the pairing procedure if the pairing process fails. If you are unsuccessful in pairing the headset after multiple pairing attempts, please contact your cell phone manufacturer or the company from which you bought the headset for assistance.

Page 22

Features for phones supporting the BLUETOOTH® Headset Profile only

If your phone only supports the Bluetooth , then the features described below are available. NOTE: During a call, the blue indicator light will flash rapidly.

When a call is incoming, you will hear a series of ring tones in the earpiece of the headset.

1. the MODE button.

1. Dial the number you are calling on your phone's keypad and the call will be transferred automatically to the headset.

If you are on an active call using your phone, and then want to transfer the call from your phone to the headset:

1. the PINCH button until you hear , then

Headset Profile

Briefly press and release

Press and hold 1 beep

To answer a call

To end a call

To make a call

To transfer a call

Page 23

immediately release the button

If you wish to prevent your voice from being heard by the person with whom you are having the phone conversation, use the mute function described below.When the headset is in this mode, you will still be able to hear the caller's voice, and you will also hear beeps that remind you that your voice cannot be heard by the caller.

To mute the call:

1. the PINCH button.You will hear periodic beeps, indicating the headset has been muted

To “unmute” the call:

1. the PINCH button. The periodic beeps will stop, indicating that the call has been un-muted

If your phone also supports the Bluetooth , then additional features are available. NOTE: During a call, the blue indicator

To Mute/ “Unmute”

Briefly press and release

Handsfree Profile

Features for phones supporting the BLUETOOTH Handsfree Profile

Page 24

light will flash rapidly.

If your headset is to your phone (headset icon displayed on your phone), and a call is incoming, you will hear a series of ring tones in the earpiece of the headset.

1. the MODE button.

If your headset is to your phone, you will not hear the ring tones in your headset; however you can still transfer the incoming call to your headset at any time by by the PINCH button for

. It may take a few seconds longer to transfer.

You can create a link to your phone at any time if one does not exist (provided it has been already paired).

1. the PINCH button until you hear 1 beep.

2. Release the button immediately.

1. the MODE button.

Answering a call

To answer a call:

To create a link

To end a call

linked

Briefly press and release

not linked

pressing and holding

1 beep

Press and hold

Briefly press and release

Page 25

To make a call

Voice Dial

NOTE: You should create the voice tags from your headset for better results

If your headset is to your phone (headset icon displayed on your phone), dial the number you are calling on your phone's keypad and the call will be transferred automatically to the headset.

If your headset is to your phone (no headset icon), you can still transfer the call to your headset at any time.

1. the PINCH button until you hear 1 beep.

2. Release the button immediately. It may take a few seconds to

transfer.

If your phone supports voice-activated dialing and you have set up voice tags on your phone,

1. the PINCH button until you hear , then

immediately release the button

linked

not linked

Press and hold

Press and hold 1 beep

Page 26

Last Number Redial

Last Number Redial while on a Call

To reject a call

To transfer a call from the headset to the phone

To transfer a call from the phone to the headset

1. the PINCH button until you hear , then immediately release the button.

1. the PINCH button until you hear 2 beeps, then immediately release the button.

2. Refer to the Call Waiting section below for call control.

1. the PINCH button until you hear 3 beeps, then immediately release the button.

If you are on an active call using your headset and then want to transfer the call to the phone:

1. the PINCH button until you hear 1 beep.

2. Release the button immediately.

If you are on an active call using your phone and then want to transfer the call to the headset:

Press and hold 2 beeps

Press and hold

Page 27

1. the PINCH button until you hear 1 beep.

2. Release the button immediately.There may be a few seconds delay before the call is transferred.

This feature may not be supported on all phones and you may

have to use your phone's menu option to transfer the sound.

If your phone notifies you of an incoming call while you already engaged in a call:

To accept the waiting call:

1. the PINCH button until you hear 1 beep.

2. Release the button immediately.This will place the first call .

To swap between calls:

1. the PINCH button until you hear 1 beep.

2. Release the button immediately.

To accept the waiting call and end the call you were engaged in:

1. the PINCH button until you hear 2 beeps.

2. Release the button immediately.

Press and hold

on-

hold

Press and hold

NOTE:

Call Waiting

Page 28

To reject the waiting call:

1. the PINCH button until you hear 3 beeps.

2. Release the button immediately.

To release all waiting calls:

1. the PINCH button until you hear 4 beeps.

2. Release the button immediately.

To mute the call:

To unmute the call:

Press and hold

Mute / Unmute

1. the PINCH button.You will hear

, indicating the headset has been muted.

1. the PINCH button. The periodic beeps

will stop, indicating that the call has been un-muted.

Briefly press and release periodic

beeps

Briefly press and release

Page 29

Care and Maintenance of your headset

Eartips

Although the risk of disease transmission is extremely low, earwax, perspiration, and skin do come into contact with the eartips. Do not share eartips with other people. Do not insert dirty eartips into your ears.

To clean the eartip, detach it from the headset. Put the headset aside in a clean, dry area. Use a small brush to brush wax, dirt and dust out of the eartip. If you wish, you may also clean the eartip using mild soap and water. Be sure to remove the eartip from the headset before any cleaning begins. You may also use an alcohol wipe on the eartip (only) to disinfect it.

If visual inspection of the eartip reveals tears, cuts, or other damage, replace it with a new eartip.A damaged eartip could detach itself from the headset and remain in your ear canal.Although it will not damage your ear, you may have to ask your physician or hearing healthcare provider to extract the eartip.

Cleaning the eartips

Page 30

Cleaning your custom earmold

WARNING:

If you have obtained a custom earmold from your hearing healthcare provider, ask him or her for directions regarding cleaning the earmold. In general, custom earmolds can be cleaned with mild soap and water. If you are using water to clean an earmold, you should detach the earmold from the headset and place the headset in a clean, dry location. Debris can be brushed or blown out of the tubing and around the canal portion of the earmold. Be careful not to allow a water drop to clog the tubing blow it out of the tubing before reattaching the earmold to the headset.

Your headset is virtually maintenance-free. However, it is NOT waterproof. To remove dust or debris, use a clean cloth or tissue to wipe dirt/perspiration off the headset.

Dropping, immersing in liquid, or exposing your headset to

extreme temperatures can damage it and can void the warranty.

Headset Maintenance

Page 31

Battery and Charging Information

Minimizing Power Consumption

Battery Life

Low Battery Indicator

To minimize power consumption, either disconnect the link (if one already exists) between the headset and the phone (icon displayed on the phone), or turn off the headset and turn it back on. To save power by disconnecting the link:

1. Press and hold the PINCH button until you hear a single beep.

2. Release the PINCH button immediately.

A fully recharged headset will provide 8+ hours of cell phone talk time, or approximately 150 hours of use in Always-On Universal or Directional Mode before it is necessary to recharge it.

When the headset requires re-charging, you will hear a warning tone from your headset.You will receive warnings every minute when 15 minutes of battery time are left.Warnings will increase to every 10 seconds when battery time is 5 minutes or less.The unit will power itself off when the battery expires.

Page 32

How to charge the headset

Replacing the battery

The headset contains a rechargeable battery and must be charged before use. It takes about 3 hours to recharge the battery. To charge the headset:

1. Turn the headset off.

2. Insert the headset charging plug into the charging port of the headset.

3. Plug the AC power adapter into an electrical wall outlet.

4. The blue indicator light will turn on indicating charging is in progress

5. The blue indicator light will flash when charging is complete (approximately 2 hours)

The headset cannot be overcharged so keep your headset fully

charged when not in use.

The battery is warranted for one year. It is not replaceable and is expected to work for 5 years.

Note:

Page 33

Frequently Asked Questions (FAQs)

How do I identify the model number and serial number of my headset?

What is the pass code or PIN for my Digital Wireless Headset, and can I change it?

Can other Bluetooth phone users hear my conversation?

Will my DigitalWireless Headset work with laptops, PCs, and PDAs?

These numbers are noted on the inside of the flexible arm.

The pass code or PIN used for pairing your Bluetooth headset to your mobile phone is "0000".This pass code cannot be changed, but it is only needed for the first connection with a phone.

No. Pairing your headset to your Bluetooth phone creates a private encrypted link between your headset and phone.

Yes, as long as the device is Bluetooth version 1.1 (or higher) and includes the audio gateway profile to support the headset or HandsFree profile in the headset.

Page 34

Can my DigitalWireless Headset talk to several other devices at the same time?

What is that beeping sound?

The phone or headset does not respond at all when I press the PINCH button.What's going on?

What is voice activation?

No. It will only “pair” and work with one phone or device at a time. If you want to pair it with another device, you must perform the pairing process again. Future models will allow multiple concurrent pairings.

Beeping sounds alert you that you are requesting a change in how the headset is working (by pressing the PINCH button), or that a phone call is waiting or that you've placed a call on “mute”.

You may need to reset your phone by turning off the power and then turning it back on again.You may also need to turn the Digital Wireless Headset off and then back on.

For those mobile phones that support voice activation, it is possible for the mobile phone user to dial phone numbers and access other calling

Page 35

services using simple voice commands. Press the PINCH button for 1 beep, then speak a stored name, number or function into the headset and the phone will call it up for you.

Generally this is an indication that the ear tip is not positioned properly in the ear.Try re-positioning the ear tip until a better seal is obtained.

Try re-positioning the ear tip into the ear.The eartip should fit snugly but be comfortable too.A snug fit will restore proper volume and tonal balance to the incoming sound.

The range is generally determined by the location of both the transmitting and receiving antennas on the phone and headset, in addition to the surrounding environment. Some things to try are:

• Do not completely cover the phone with your hand. Do not position your phone and headset such that your body or any walls are in between them.

Does your caller complain they hear an echo?

Is the incoming sound tinny and quiet?

How can I increase the range of my Digital Wireless Headset?

•

Page 36

Limited Warranty

Gennum Corporation warrants that your headset will be free from defects in material or workmanship for a period of one (1) year from the date of shipment, under normal use and conditions.

During this period, if the headset is found to be defective in materials or workmanship, Gennum will repair or replace it, at the sole option of Gennum, at no charge to you. If Gennum determines that it is not possible to repair or replace the headset, it may, at its sole option, refund the purchase price paid for the headset.THESE ARE THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY BY GENNUM. IN NO EVENT SHALL GENNUM BE LIABLE FOR DAMAGES EXCEEDING THE SALE PRICE FOR YOUR HEADSET.

You are responsible for packing the defective headset properly in the original packaging, and for the cost of shipping.A copy of the original receipt must be included. Shipping instructions will be given by technical support at Gennum.Warranty repairs are completed at no charge for parts or labour, and Gennum will pay the cost of shipping the repaired or

For all warranty and service related matters, please read the contact information below.

Page 37

replaced product back to you.Warranty repairs may use new or equal replacement parts. Goods will not be accepted for return for nonwarranty reasons without the express prior written approval of Gennum.

Gennum reserves the right to make the final decision on any warranty claim that may be questionable.This limited warranty does not cover and Gennum will not be responsible for failures or defects due to misuse, neglect, abuse, accidents, alterations, improper or unauthorized installation or service, unauthorized removal or repairs, failure to follow instructions, fire, floods, acts of God, or spills of food or liquids.

EXCEPT FOR THE EXPRESS LIMITED WARRANTY PROVIDED ABOVE, THE HEADSET, FIRMWARE, SOFTWARE,WALL CHARGER WITH ADAPTERS, REPLACEMENT EAR TIPS AND WRITTEN MATERIALS ARE PROVIDED “AS IS” WITHOUT REPRESENTATION, CONDITION OR WARRANTY OF ANY KIND,WHETHER EXPRESS, IMPLIED OR STATUTORY,AND GENNUM SPECIFICALLY EXCLUDES ALL OTHER CONDITIONS AND WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED CONDITIONS AND WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL GENNUM BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING

Page 38

DIRECTLY OR INDIRECTLY IN CONNECTION WITH THE HEADSET, THE USE OF THE HEADSET OR OTHERWISE,WHETHER FOR LOSS OF PROFITS, BUSINESS REVENUES OR OTHERWISE.

This warranty sets forth the entire responsibility of Gennum with respect to the headset, firmware, and software, wall charger with adapters, replacement tips and written materials.Your exclusive remedy is repair, replacement or refund as stated herein. In no event shall Gennum's liabilities exceed the cost of correcting defects as provided herein and any such liabilities will terminate upon expiration of the warranty period.

This warranty is valid only when the headset is purchased from a Gennum Authorized Dealer, and applies only to the original purchaser. Headsets with the serial number or model designation removed, altered, replaced or defaced are not covered by this warranty.

The Bluetooth® trademark is owned by the Bluetooth SIG, Inc., and used by Gennum Corporation under license.

HearPhone™ Technology is a trademark that is owned by Gennum Corporation.

Trademarks™ and Registered Trademarks ®

Page 39

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by

Note:

Page 40

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help.

In accordance with Annex IV of the EU directive 1999/5/EC, Gennum Corporation declares under our responsibility that the product:

Type: Intended Purpose: Equipment Class:

Complies with the appropriate essential requirements of the Article 3 of the R&TTE and the other relevant provisions, when used for its intended purpose.

•

EU Notice

DECLARATION OF CONFORMITY

H-100 Bluetooth Headset 1

Page 41

Health and Safety requirements contained in Article 3 (1) a)

Information technology equipment - Safety

Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz)

- General public

Protection requirements with respect to electromagnetic compatibility Art.3 (1) b)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

Means of the efficient use of the radio frequency spectrum Art.3 (2)

Electromagnetic compatibility and Radio Spectrum Matters (ERM);Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum

EN 60 950-1:2001:

EN 50371:2002,

EN 301 489-17:V1.2.1,

EN 300 328-2 V1.2.1,

Page 42

modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

Weight 22 grams Typical Talk Time 8 hours Typical Standby Time 150 hours (from a full charge) Typical Recharge Time 3 hours (from a full discharge)

Specifications are subject to change without notice.

For general information about the Digital Wireless Headset, please contact:

If you are having difficulty operating your headset or desire more information, please contact the company from which you purchased the headset.

Specifications

Contact Information

Page 43

Page 44

HANDSFREE FUNCTION QUICK SUMMARY

Answer Call 1 beep

End/ Reject Call 3 beeps

Voice Dial 1 beep

Last Number Redial 2 beeps

Transfer Call

Phone to Headset

Last Number Redial 2 beeps

Hold First Call Swap Between Calls 1 beep Accept Waiting Call; 2 beeps

Reject Call Waiting 3 beeps

Release All Held Calls 4 beeps

Status Function Press and hold

PINCH

Not on a Call

Single active call

BUTTON for

Two active calls

One or two

active calls

from 1 beep

from Headset to Phone

Answer Call Waiting; 1 beep

Hang-up First Call

Mute/Unmute Brief Press Only

WIRELESSHDSTmanual 1.0

GENNUM H-100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual