Genius SLIM F600 User Manual
User’s Guide
Genius Scanner
All trademarks and brand names mentioned in this publication are property of their respective owners.
© 2003 KYE Systems Corp. All rights reserved. No portion of this document may be reproduced without permission.
Table of Contents |
|
INTRODUCTION ..................................................................................................... |
1 |
How to Use This Guide............................................................................................... |
1 |
Conventions of this Guide........................................................................................... |
2 |
A Note about Icons ..................................................................................................... |
2 |
System Requirements ................................................................................................ |
2 |
Package Contents ...................................................................................................... |
3 |
The Scanner’s Features ............................................................................................. |
4 |
CHAPTER I. INSTALLING GENIUS SCANNER ............................................................. |
5 |
Software Requirements .............................................................................................. |
5 |
Hardware Requirements............................................................................................. |
5 |
Installing and Setting up the Scanner ......................................................................... |
6 |
Step 1. Connecting the Genius Scanner to Your Computer ............................................... |
6 |
Step 2. Installing the Software............................................................................................. |
7 |
Step 3. Testing the Scanner ................................................................................................. |
8 |
Software Setup Troubleshooting ................................................................................ |
9 |
Installing Additional Software...................................................................................... |
9 |
Uninstalling the Scanner............................................................................................. |
9 |
Uninstall from the “Start Menu” (Uninstall Wizard) ............................................................... |
9 |
Scanner Setup After Windows XP Upgrade ............................................................. |
10 |
CHAPTER II. USAGE AND MAINTENANCE............................................................... |
11 |
Operating the Scanner.............................................................................................. |
11 |
Scan and Image Editing............................................................................................ |
12 |
Status Indicator......................................................................................................... |
13 |
Scanner Connection ................................................................................................. |
13 |
Maintenance ............................................................................................................. |
14 |
Calibrating the Scanner ...................................................................................................... |
14 |
Cleaning the Scanner ......................................................................................................... |
15 |
Usage & Maintenance Tips....................................................................................... |
15 |
Storage of the Scanner............................................................................................. |
16 |
Using the Base Stand......................................................................................................... |
16 |
Using the Wall Holder......................................................................................................... |
17 |
CHAPTER III. HOW TO USE QUICK FUNCTION BUTTONS ......................................... |
18 |
Scan Button ........................................................................................................................ |
18 |
Custom Button .................................................................................................................... |
20 |
Changing Button Settings................................................................................................... |
22 |
APPENDIX A: SPECIFICATIONS............................................................................. |
23 |
APPENDIX B: CUSTOMER SERVICE AND WARRANTY.............................................. |
24 |
Statement of Limited Warranty ................................................................................. |
24 |
FCC Radio Frequency Statement............................................................................. |
25 |
CONTACTING GENIUS.......................................................................................... |
27 |
Introduction 
Welcome to the world of Genius scanners, the ultimate in imaging. Your new scanner will improve the professionalism of your day-to-day computing tasks by allowing you to input images and electronic text into your computer system.
Like all of our products, your new scanner is thoroughly tested and backed by our reputation for unsurpassed dependability and customer satisfaction.
The last page of this user’s manual provides more information for contacting Genius Service Center. Please feel free to contact us or visit GeniusLife Homepage (http://www.geniusnet.com.tw) for getting better service.
Thank you for choosing Genius Product. We hope you will continue to turn to us for additional quality products as your computing needs and interests grow.
How to Use This Guide
This User’s Guide provides instructions and illustrations on how to install and operate your scanner. This guide assumes the user is familiar with the Microsoft Windows XP/Me/2000/98. If this is not the case, we suggest you learn more about Microsoft Windows by referring to your Microsoft Windows manual before using your scanner.
The Introduction section of this manual describes the box contents and minimum computer requirements to use this scanner. Before you start installing your Genius scanner, check the box contents to make sure all parts are included. If any items are damaged or missing, please contact the vendor where you purchased your scanner or Genius’ customer service directly at one of the locations listed at the back of this manual.
Chapter I describes how to install scanner’s software and connect the scanner to your computer.
Note: The scanner connects to your computer through the Universal Serial Bus (USB). If your computer does not support USB technology, you will need to purchase a USB interface card to add USB capabilities to your computer, or buy and install USB connectors if your motherboard has USB capabilities. This guide assumes that your computer is USB-ready and has a free USB port.
Chapter II describes how to use, maintain and clean your scanner.
Chapter III contains some basic descriptions on how to use your scanner. More detailed descriptions can be found by using the Help function in the relevant scanner programs.
Appendix A contains the Specifications of this Genius scanner.
1 Genius Scanner
Appendix B contains Genius’ limited warranty agreement and FCC statement concerning the product.
Conventions of this Guide
Bold — Important note or first use of an important term in a chapter. [XXX] — Represents commands or contents on your computer screen.
A Note about Icons
This guide uses the following icons to point out information that deserves special attention.
|
Danger: A procedure that must be followed carefully to prevent injury, |
Danger |
or accidents. |
|
Caution: Information that, if not followed, may result in data loss or Caution damage to the product.
Pay Special Attention: Instructions that are important to remember
and may prevent mistakes.
Attention
System Requirements1
Windows/Intel Compatible Personal Computer Pentium II or above
CD-ROM Drive
64 MB RAM (128 MB Recommended)
250 MB Free Hard Disk Space USB Port
Microsoft™ Windows XP/Me/2000/98
NOTE: Windows NT 4.0 does not support Universal Serial Bus (USB) connectivity. Video card that supports 16-bit color or greater
1 Higher requirements might be needed when you scan or edit a large quantity of image data. The system requirements herein are only a guideline, as in general the better the computer (motherboard, processor, hard disk, RAM, video graphic card), the better the results.
Genius Scanner |
2 |
Package Contents2
1.The Scanner3
2.USB Cable
3.Quick Installation Guide
4.Setup / Application CD-ROM includes the following software applications4
•Scanner Setup Program
•Smart Touch (Scanner Button Setting Software)
•TWAIN Program
•NewSoft Presto! PageManager (Photo Management Software)
•NewSoft Presto! ImageFolio (Imaging Editing Software)
•NewSoft Presto! Mr. Photo (Web Photo Software)
•ABBYY FineReader 5.0 Sprint (Text Recognition Software)
•IRIS Cardiris 3.0
•Adobe Acrobat Reader (PDF Product Manuals Reading Program)
•This User’s Guide (Electronic Version)
5.Calibration Sheet
6.Clean Sheet
7.Travel Pouch
8.Wall Holder
9.Two Screws
10.Base Stand
2Save the box and packing materials in case you need to transport this scanner in the future.
3The scanner illustration(s) may appear different than from the actual scanner itself.
4The bundled software may change at any time without prior notice.
3 Genius Scanner
The Scanner’s Features
1.USB port: It connects the scanner to a USB port on your computer by the included USB cable.
2.Alignment arrow: Always align the edges of your documents to this arrow sign.
3.Page feed slot: Feed the document into the scanner from this direction. You can feel the document being grabbed by the scanner.
4.Custom button: Press this button to start scanning for OCR, Copy or E-mail.
5.LED indicator: It indicates the scanner’s current status.
6.Scan button: Press this button to start scanning and save the images into your computer.
Genius Scanner |
4 |
Chapter I.
Installing Genius Scanner
Before installing your scanner, please verify that you have all of the proper components. A list of the package contents is provided in this guide.
Software Requirements
Your scanner comes with the software of NewSoft Presto! ImageFolio, ABBYY FineReader 5.0 Sprint, NewSoft Presto! PageManager, NewSoft Mr. Photo, Adobe Acrobat Reader, the scanner’s driver, Smart Touch, and TWAIN Program. All of these software applications use approximately 160 megabytes of hard disk space after they are installed into your computer. To ensure ample room for the installation, as well as for scanning and saving images, a minimum of 250 megabytes of hard disk space is recommended.
Hardware Requirements
This scanner connects to your computer through the Universal Serial Bus (USB) which supports hot Plug and Play. To determine whether your computer is USBcapable, you must check the rear of your PC to locate a USB jack that looks the same as the one pictured below. Note that on some computers, the USB port at the rear of the computer may be occupied and additional ports may be found on the monitor or keyboard. If you are having trouble in locating the USB port on your computer, please refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which usually appear as shown below.
USB Connector(s)
5 Genius Scanner
If you don’t find such USB ports on your computer, then you need to purchase a certified USB interface card to add USB capabilities to your computer.
Installing and Setting up the Scanner
Step 1. Connecting the Genius Scanner to Your Computer
1.Plug the square end of the included USB cable to the USB port of the scanner.
2.Plug the rectangular end of the USB cable to the USB port on the back of your computer.
Note: If there is another USB device connected to the computer, connect the scanner to an available USB port.
3.If you plan to connect your scanner to a USB hub5, make sure that the hub is connected to the USB port in your computer. Next, connect the scanner to the USB hub.
Note: If you do not have a USB port available, you might need to buy a USB port.
5 The USB hub is not included with the scanner.
Genius Scanner |
6 |
Loading...